SONET-MIB Download
The MIB module to describe SONET/SDH interface objects.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for SONET-MIB
- sonetMediumTable
- The SONET/SDH Medium table.
- sonetMediumEntry
- An entry in the SONET/SDH Medium table.
- sonetMediumType
- This variable identifies whether a SONET or a SDH signal is used across this interface.
- sonetMediumTimeElapsed
- The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the ag ...
- sonetMediumValidIntervals
- The number of previous 15-minute intervals for which data was collected. A SONET/SDH interface must be capable of supporting at least n intervals. The minimum value of n is 4. The default of n is 32. The maximum value of n is 96. The value will be
unl ... - sonetMediumLineCoding
- This variable describes the line coding for this interface. The B3ZS and CMI are used for electrical SONET/SDH signals (STS-1 and STS-3). The Non-Return to Zero (NRZ) and the Return to Zero are used for optical SONET/SDH signals.
- sonetMediumLineType
- This variable describes the line type for this interface. The line types are Short and Long Range Single Mode fiber or Multi-Mode fiber interfaces, and coax and UTP for electrical interfaces. The value sonetOther should be used when the Line Type is not ...
- sonetMediumCircuitIdentifier
- This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. Note that the circuit identifier, if available, is also represented by ifPhysAddress.
- sonetMediumInvalidIntervals
- The number of intervals in the range from 0 to sonetMediumValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
- sonetMediumLoopbackConfig
- The current loopback state of the SONET/SDH interface. The values mean: sonetNoLoop Not in the loopback state. A device that is not capable of performing a loopback on this interface shall always return this value. sonetFacilityLoop The received signal a ...
- sonetSESthresholdSet
- An enumerated integer indicating which recognized set of SES thresholds that the agent uses for determining severely errored seconds and unavailable time. other(1) None of the following. bellcore1991(2) Bellcore TR-NWT-000253, 1991 [TR253], or ANSI T1M1.3 ...
- sonetSectionCurrentTable
- The SONET/SDH Section Current table.
- sonetSectionCurrentEntry
- An entry in the SONET/SDH Section Current table.
- sonetSectionCurrentStatus
- This variable indicates the status of the interface. The sonetSectionCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sonetSectionNoDefect should be set if and only if no other flag is set. ...
- sonetSectionCurrentESs
- The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in the current 15 minute interval.
- sonetSectionCurrentSESs
- The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in the current 15 minute interval.
- sonetSectionCurrentSEFSs
- The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in the current 15 minute interval.
- sonetSectionCurrentCVs
- The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in the current 15 minute interval.
- sonetSectionIntervalTable
- The SONET/SDH Section Interval table.
- sonetSectionIntervalEntry
- An entry in the SONET/SDH Section Interval table.
- sonetSectionIntervalNumber
- A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding t ...
- sonetSectionIntervalESs
- The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
- sonetSectionIntervalSESs
- The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
- sonetSectionIntervalSEFSs
- The counter associated with the number of Severely Errored Framing Seconds encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
- sonetSectionIntervalCVs
- The counter associated with the number of Coding Violations encountered by a SONET/SDH Section in a particular 15-minute interval in the past 24 hours.
- sonetSectionIntervalValidData
- This variable indicates if the data for this interval is valid.
- sonetLineCurrentTable
- The SONET/SDH Line Current table.
- sonetLineCurrentEntry
- An entry in the SONET/SDH Line Current table.
- sonetLineCurrentStatus
- This variable indicates the status of the interface. The sonetLineCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sonetLineNoDefect should be set if and only if no other flag is set. The va ...
- sonetLineCurrentESs
- The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in the current 15 minute interval.
- sonetLineCurrentSESs
- The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in the current 15 minute interval.
- sonetLineCurrentCVs
- The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in the current 15 minute interval.
- sonetLineCurrentUASs
- The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in the current 15 minute interval.
- sonetLineIntervalTable
- The SONET/SDH Line Interval table.
- sonetLineIntervalEntry
- An entry in the SONET/SDH Line Interval table.
- sonetLineIntervalNumber
- A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding t ...
- sonetLineIntervalESs
- The counter associated with the number of Errored Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
- sonetLineIntervalSESs
- The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
- sonetLineIntervalCVs
- The counter associated with the number of Coding Violations encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
- sonetLineIntervalUASs
- The counter associated with the number of Unavailable Seconds encountered by a SONET/SDH Line in a particular 15-minute interval in the past 24 hours.
- sonetLineIntervalValidData
- This variable indicates if the data for this interval is valid.
- sonetFarEndLineCurrentTable
- The SONET/SDH Far End Line Current table.
- sonetFarEndLineCurrentEntry
- An entry in the SONET/SDH Far End Line Current table.
- sonetFarEndLineCurrentESs
- The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH interface in the current 15 minute interval.
- sonetFarEndLineCurrentSESs
- The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Medium/Section/Line interface in the current 15 minute interval.
- sonetFarEndLineCurrentCVs
- The counter associated with the number of Far End Coding Violations reported via the far end block error count encountered by a SONET/SDH Medium/Section/Line interface in the current 15 minute interval.
- sonetFarEndLineCurrentUASs
- The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Medium/Section/Line interface in the current 15 minute interval.
- sonetFarEndLineIntervalTable
- The SONET/SDH Far End Line Interval table.
- sonetFarEndLineIntervalEntry
- An entry in the SONET/SDH Far End Line Interval table.
- sonetFarEndLineIntervalNumber
- A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding t ...
- sonetFarEndLineIntervalESs
- The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH Line interface in a particular 15-minute interval in the past 24 hours.
- sonetFarEndLineIntervalSESs
- The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Line interface in a particular 15-minute interval in the past 24 hours.
- sonetFarEndLineIntervalCVs
- The counter associated with the number of Far End Coding Violations reported via the far end block error count encountered by a SONET/SDH Line interface in a particular 15-minute interval in the past 24 hours.
- sonetFarEndLineIntervalUASs
- The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Line interface in a particular 15-minute interval in the past 24 hours.
- sonetFarEndLineIntervalValidData
- This variable indicates if the data for this interval is valid.
- sonetPathCurrentTable
- The SONET/SDH Path Current table.
- sonetPathCurrentEntry
- An entry in the SONET/SDH Path Current table.
- sonetPathCurrentWidth
- A value that indicates the type of the SONET/SDH Path. For SONET, the assigned types are the STS-Nc SPEs, where N = 1, 3, 12, 24, 48, 192 and 768. STS-1 is equal to 51.84 Mbps. For SDH, the assigned types are the STM-Nc VCs, where N = 1, 4, 16, 64 and 2 ...
- sonetPathCurrentStatus
- This variable indicates the status of the interface. The sonetPathCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sonetPathNoDefect should be set if and only if no other flag is set. The va ...
- sonetPathCurrentESs
- The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval.
- sonetPathCurrentSESs
- The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in the current 15 minute interval.
- sonetPathCurrentCVs
- The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in the current 15 minute interval.
- sonetPathCurrentUASs
- The counter associated with the number of Unavailable Seconds encountered by a Path in the current 15 minute interval.
- sonetPathIntervalTable
- The SONET/SDH Path Interval table.
- sonetPathIntervalEntry
- An entry in the SONET/SDH Path Interval table.
- sonetPathIntervalNumber
- A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding t ...
- sonetPathIntervalESs
- The counter associated with the number of Errored Seconds encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours.
- sonetPathIntervalSESs
- The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours.
- sonetPathIntervalCVs
- The counter associated with the number of Coding Violations encountered by a SONET/SDH Path in a particular 15-minute interval in the past 24 hours.
- sonetPathIntervalUASs
- The counter associated with the number of Unavailable Seconds encountered by a Path in a particular 15-minute interval in the past 24 hours.
- sonetPathIntervalValidData
- This variable indicates if the data for this interval is valid.
- sonetFarEndPathCurrentTable
- The SONET/SDH Far End Path Current table.
- sonetFarEndPathCurrentEntry
- An entry in the SONET/SDH Far End Path Current table.
- sonetFarEndPathCurrentESs
- The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH interface in the current 15 minute interval.
- sonetFarEndPathCurrentSESs
- The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Path interface in the current 15 minute interval.
- sonetFarEndPathCurrentCVs
- The counter associated with the number of Far End Coding Violations reported via the far end block error count encountered by a SONET/SDH Path interface in the current 15 minute interval.
- sonetFarEndPathCurrentUASs
- The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Path interface in the current 15 minute interval.
- sonetFarEndPathIntervalTable
- The SONET/SDH Far End Path Interval table.
- sonetFarEndPathIntervalEntry
- An entry in the SONET/SDH Far End Path Interval table.
- sonetFarEndPathIntervalNumber
- A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding t ...
- sonetFarEndPathIntervalESs
- The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH Path interface in a particular 15-minute interval in the past 24 hours.
- sonetFarEndPathIntervalSESs
- The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH Path interface in a particular 15-minute interval in the past 24 hours.
- sonetFarEndPathIntervalCVs
- The counter associated with the number of Far End Coding Violations reported via the far end block error count encountered by a SONET/SDH Path interface in a particular 15-minute interval in the past 24 hours.
- sonetFarEndPathIntervalUASs
- The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH Path interface in a particular 15-minute interval in the past 24 hours.
- sonetFarEndPathIntervalValidData
- This variable indicates if the data for this interval is valid.
- sonetVTCurrentTable
- The SONET/SDH VT Current table.
- sonetVTCurrentEntry
- An entry in the SONET/SDH VT Current table.
- sonetVTCurrentWidth
- A value that indicates the type of the SONET VT and SDH VC. Assigned widths are VT1.5/VC11, VT2/VC12, VT3, VT6/VC2, and VT6c.
- sonetVTCurrentStatus
- This variable indicates the status of the interface. The sonetVTCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects and failures simultaneously. The sonetVTNoDefect should be set if and only if no other flag is se ...
- sonetVTCurrentESs
- The counter associated with the number of Errored Seconds encountered by a SONET/SDH VT in the current 15 minute interval.
- sonetVTCurrentSESs
- The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH VT in the current 15 minute interval.
- sonetVTCurrentCVs
- The counter associated with the number of Coding Violations encountered by a SONET/SDH VT in the current 15 minute interval.
- sonetVTCurrentUASs
- The counter associated with the number of Unavailable Seconds encountered by a VT in the current 15 minute interval.
- sonetVTIntervalTable
- The SONET/SDH VT Interval table.
- sonetVTIntervalEntry
- An entry in the SONET/SDH VT Interval table.
- sonetVTIntervalNumber
- A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding t ...
- sonetVTIntervalESs
- The counter associated with the number of Errored Seconds encountered by a SONET/SDH VT in a particular 15-minute interval in the past 24 hours.
- sonetVTIntervalSESs
- The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH VT in a particular 15-minute interval in the past 24 hours.
- sonetVTIntervalCVs
- The counter associated with the number of Coding Violations encountered by a SONET/SDH VT in a particular 15-minute interval in the past 24 hours.
- sonetVTIntervalUASs
- The counter associated with the number of Unavailable Seconds encountered by a VT in a particular 15-minute interval in the past 24 hours.
- sonetVTIntervalValidData
- This variable indicates if the data for this interval is valid.
- sonetFarEndVTCurrentTable
- The SONET/SDH Far End VT Current table.
- sonetFarEndVTCurrentEntry
- An entry in the SONET/SDH Far End VT Current table.
- sonetFarEndVTCurrentESs
- The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH interface in the current 15 minute interval.
- sonetFarEndVTCurrentSESs
- The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH VT interface in the current 15 minute interval.
- sonetFarEndVTCurrentCVs
- The counter associated with the number of Far End Coding Violations reported via the far end block error count encountered by a SONET/SDH VT interface in the current 15 minute interval.
- sonetFarEndVTCurrentUASs
- The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH VT interface in the current 15 minute interval.
- sonetFarEndVTIntervalTable
- The SONET/SDH Far End VT Interval table.
- sonetFarEndVTIntervalEntry
- An entry in the SONET/SDH Far End VT Interval table.
- sonetFarEndVTIntervalNumber
- A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding t ...
- sonetFarEndVTIntervalESs
- The counter associated with the number of Far End Errored Seconds encountered by a SONET/SDH VT interface in a particular 15-minute interval in the past 24 hours.
- sonetFarEndVTIntervalSESs
- The counter associated with the number of Far End Severely Errored Seconds encountered by a SONET/SDH VT interface in a particular 15-minute interval in the past 24 hours.
- sonetFarEndVTIntervalCVs
- The counter associated with the number of Far End Coding Violations reported via the far end block error count encountered by a SONET/SDH VT interface in a particular 15-minute interval in the past 24 hours.
- sonetFarEndVTIntervalUASs
- The counter associated with the number of Far End Unavailable Seconds encountered by a SONET/SDH VT interface in a particular 15-minute interval in the past 24 hours.
- sonetFarEndVTIntervalValidData
- This variable indicates if the data for this interval is valid.
- sonetMediumStuff
- A collection of objects providing configuration information applicable to all SONET/SDH interfaces.
- sonetSectionStuff
- A collection of objects providing information specific to SONET/SDH Section interfaces.
- sonetLineStuff
- A collection of objects providing information specific to SONET/SDH Line interfaces.
- sonetFarEndLineStuff
- A collection of objects providing information specific to SONET/SDH Line interfaces, and maintaining Line Far End information.
- sonetPathStuff
- A collection of objects providing information specific to SONET/SDH Path interfaces.
- sonetFarEndPathStuff
- A collection of objects providing information specific to SONET/SDH Path interfaces, and maintaining Path Far End information.
- sonetVTStuff
- A collection of objects providing information specific to SONET/SDH VT interfaces.
- sonetFarEndVTStuff
- A collection of objects providing information specific to SONET/SDH VT interfaces, and maintaining VT Far End information.
- sonetMediumStuff2
- A collection of objects providing configuration information applicable to all SONET/SDH interfaces.
- sonetSectionStuff2
- A collection of objects providing information specific to SONET/SDH Section interfaces.
- sonetLineStuff2
- A collection of objects providing information specific to SONET/SDH Line interfaces.
- sonetPathStuff2
- A collection of objects providing information specific to SONET/SDH Path interfaces.
- sonetVTStuff2
- A collection of objects providing information specific to SONET/SDH VT interfaces.
- sonetFarEndLineStuff2
- A collection of objects providing information specific to SONET/SDH Line interfaces, and maintaining Line Far End information.
- sonetFarEndPathStuff2
- A collection of objects providing information specific to SONET/SDH Path interfaces, and maintaining Path Far End information.
- sonetFarEndVTStuff2
- A collection of objects providing information specific to SONET/SDH VT interfaces, and maintaining VT Far End information.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
