X-DDI-MIB Download

adptrNumber

machine.

adptrTable

is given by adptrNumber.

adptrEntry

Northern Telecom network adapter card.

adptrIndex

machine. The value ranges between 1 and the value of adptrNumber. The value for each adapter card must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.

adptrType

The type of adapter card.

adptrSerialNumber

The serial number of the adapter card.

adptrHwHiVersion

card. For example, if the hardware version is 3.1, the value of adptrHwHiVersion is 3.

adptrHwLoVersion

card. For example, if the hardware version is 3.1, the value of adptrHwLoVersion is 1.

adptrFwHiVersion

card. For example, if the firmware version is 3.1, the value of adptrFwHiVersion is 3.

adptrFwLoVersion

card. For example, if the firmware version is 3.1, the value of adptrFwLoVersion is 1.

adptrSwHiVersion

example, if the software version is 3.1, the value of adptrSwHiVersion is 3.

adptrSwLoVersion

example, if the software version is 3.1, the value of adptrSwLoVersion is 1.

adptrStatus

status is not ok(2), the value of adptrSelfTestResult gives more detailed information about the adapter card's failure condition(s).

adptrSelfTestResult

indicates that the adapter passed all tests. Bits set in the result indicate error conditions.

adptrDriverHiVersion

example, if the driver version is 3.1, the value of adptrDriverHiVersion is 3.

adptrDriverLoVersion

example, if the driver version is 3.1, the value of adptrDriverLoVersion is 1.

adptrTrapReceiverTable

This table lists the addresses of Network Management Stations that should receive trap messages from this adapter when an exception condition occurs.

adptrTrapReceiverEntry

A trap receiver table entry.

adptrTrapReceiverType

corresponding entry from the adptrTrapReceiverTable. To add a new entry to the adptrTrapReceiverTable, set the adptrTrapReceiverAddr to an IpAddress which is not already in the table. The adptrTrapReceiverType for that entry is automatically set to other ...

adptrTrapReceiverAddr

IP address for trap receiver.

adptrTrapReceiverComm

receiver.

adptrCommunityTable

lists community strings and their access levels. When an SNMP message is received by this adapter, the community string in the message is compared with this table to determine access rights of the sender.

adptrCommunityEntry

A community table entry.

adptrCommunityAccess

read and write all objects in the MIB. A value of readWrite(3) allows the community to read and write all objects except the adptrCommunityTable, which it cannot access at all. A value of readOnly(2) allows the community to read all objects except the a ...

adptrCommunityString

defined by the value of adptrCommunityAccess.

adptrMgmtType

The type of network management for the adapter.

adptrMgmtHiVersion

For example, if the network management version is 3.1, the value of adptrMgmtHiVersion is 3.

adptrMgmtLoVersion

For example, if the network management version is 3.1, the value of adptrMgmtLoVersion is 1.