XYLAN-DS3-MIB Download
With the IPHost SNMP tool, you can monitor any SNMP objects of the
XYLAN-DS3-MIB
. You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables,
their current values and descriptions taken from the
XYLAN-DS3-MIB
.
OID list for XYLAN-DS3-MIB
- dsx3PortConfigTable
- A table of DS3/E3 physical layer status and parameter information.
- dsx3PortConfigEntry
- An entry in the table, containing information about the physical layer of a DS3/E3 interface.
- dsx3PortConfigSlotIndex
- A unique value which identifies this HSM board slot.
- dsx3PortConfigPortIndex
- A unique value which identifies this port.
- dsx3PortConfigIfType
- This objects indicates type of interface.
- dsx3PortConfigTcSubLayer
- The type of specific Transmission Convergence sublayer used on this port. Each option is described as follows: none - specific sublayer is not present. plcp - Physical Layer Convergence Protocol. adm - ATM Direct Mapping.
- dsx3PortConfigPlcpStatus
- This object indicates current status of PLCP. This object only applies to port which sublayer is configured to PLCP. A value of 1 is returned for other cases. The dsx3PortStatsPlcpStatus is a bit map represented as a sum, therfore it can represent multip ...
- dsx3PortConfigFEAC
- This object indicates the presence FEAC being received by this port. This object only applies to DS3 interface with framing format configured to C-bit parity. A value of dsx3NoFEAC(1) is returned for other cases.
- dsx3PortConfigNatUse
- The object indicates current state of National Use Bit which is bit 12 of G.751 frame. This object only applies to E3 port which line framimg is configured to G.751. A value of one(1) is returned for other sublayers or DS3 port.
- dsx3PortConfigRxPayloadType
- The object indicates current state of payload type bits (bit 3,4,5 of Maintenance and Adaptation byte) of an E3 G.832 frame. This objects only applies to E3 port which framing is configured to G.832. A value of 1 is returned for all other cases.
- dsx3PortConfigTimeMarker
- The object indicates current state of Timing Marker bit (bit 8 of Maintenanc and Adaptation byte) of an E3 G.832 frame. This objects only applies to E3 port which framing is configured to G.832. A value of one(1) is returned for other cases.
- dsx3PortConfigTxPayloadType
- The object reflects the value to be inserted in the payload type bits (bit 3,4,5 of Maintenance and Adaptation byte) of an E3 G.832 frame. This objects only applies to E3 port whose framing is configured as G.832. Additionally if this object is not appl ...
- dsx3PortConfigExpectedPayloadType
- The object indicates the current expected payload type bits (bit 3,4,5 of Maintenance and Adaptation byte) of an E3 G.832 frame. This objects only applies to E3 port whose framing is configured as G.832. Additionally if this object is not applicable, i. ...
- dsx3PortConfigTxTrailTraceID
- The object indicates the characters to be inserted as Trail Trace Identifier of an E3 G.832 frame. This object only applies to E3 port whose framing is configured as G.832. A binary 0 in the first octet indicates all zeros insertion, or this port is not c ...
- dsx3PortConfigRxTrailTraceID
- The object indicates the current characters received as Trail Trace Identifier of an E3 G.832 frame. This object only applies to E3 port whose framing is configured as G.832. A binary 0 in the first octet indicates all zeros insertion received or this por ...
- dsx3PortConfigExpectedTrailTraceID
- The object indicates the expected characters received as Trail Trace Identifier of an E3 G.832 frame. This object only applies to E3 port whose framing is configured as G.832. A binary 0 in the first octet indicates all zeros insertion, or this port is no ...
- dsx3PortConfigLineStatus
- This object indicates the line status of a ds3/e3 interface. Each bit position (bit-0 to bit-18) represents one failure condition of the interface. Bit-19 and bit-20 are used to represent Timing Marker bit and National Use bit. Note that the SYNTAX type o ...
- dsx3PortConfigPlScramble
- Payload Scrambling Enable.
- dsx3PortStatsTable
- A table of DS3/E3 physical port statistics.
- dsx3PortStatsEntry
- An entry in the table, containing information about the physical port statistics of a DS3/E3 interface.
- dsx3PortStatsSlotIndex
- A unique value which identifies this HSM board slot.
- dsx3PortStatsPortIndex
- A unique value which identifies this port.
- dsx3PortStatsLossOfSignal
- Total number of Loss of Signals that have been detected on this port.
- dsx3PortStatsOutOfFrame
- Total number of Out of Frames that have been detected on this port.
- dsx3PortStatsAISEvent
- Total number of AIS events that have been detected on this port.
- dsx3PortStatsRedAlarmEvent
- Total number of Red Alarm events that have been detected on this port. This object only applies to DS3 interface.
- dsx3PortStatsFarEndReceiveError
- Total number of Far-end Receive Error events that have been received on this port.
- dsx3PortStatsFarEndBlkError
- Total number of Far-end Block Error events that have been received on this port.
- dsx3PortStatsLineCodeVioEvent
- Total number of Line Code Violation events that have been received on this port. This is a count of both Bipolar Violation (BPV) and Excessive zeros (EXZs).
- dsx3PortStatsFramingBitError
- Total number of Framing Bit Error events that have been detected on this port.
- dsx3PortStatsChangeOfFrameAlign
- Total number of Change of Frame Alignment events that have been detected on this port.
- dsx3PortStatsParityBitError
- Total number of parity bit errors that have been detected on this port.
- dsx3PortStatsPathParityBitError
- Total number of path parity bit errors that have been detected on this port.
- dsx3PortStatsPlcpLossOfFrame
- Total number of PLCP loss of frame events that have been detected on this port. A value of zero is returned if port sublayer is not PLCP.
- dsx3PortStatsPlcpOutOfFrame
- Total number of PLCP out of frame events that have been detected on this port. A value of zero is returned if port sublayer is not PLCP.
- dsx3PortStatsPlcpYellowAlarm
- Total number of PLCP Yellow Alarms that have been detected on this port. A value of zero is returned if port sublayer is not PLCP.
- dsx3PortStatsPlcpFarEndBlkError
- Total number of PLCP Far-end Block Errors that have been detected on this port. A value of zero is returned if port sublayer is not PLCP.
- dsx3PortStatsPlcpFramingError
- Total number of PLCP Framing Octet Errors that have been detected on this port. A value of zero is returned if port sublayer is not PLCP.
- dsx3PortStatsPlcpBIPError
- Total number of PLCP Bit Interleaved Parity Errors that have been detected on this port. A value of zero is returned if port sublayer is not PLCP.
- dsx3PortStatsPayloadTypeMismatchError
- Total number of payload type mismatch failure that have been detected on this port. This object is applicable to E3 G.832 only. A value of zero is returned if the port is not configured as E3 and G.832.
- dsx3PortStatsUnequippedError
- Total number of unequipped failure that have been detected on this port. This object is applicable to E3 G.832 only. A value of zero is returned if the port is not configured as E3 and G.832.
- dsx3PortStatsTrailTraceIDMismatchError
- Total number of trail trace identification mismatch failure that have been detected on this port. This object is applicable to E3 G.832 only. A value of zero is returned if the port is not configured as E3 and G.832.
- dsx3PortIntervalTable
- A table of DS3/E3 physical port statistics.
- dsx3PortIntervalEntry
- An entry in the table, containing information about the physical port statistics of a DS3/E3 interface.
- dsx3PortIntervalSlotIndex
- A unique value which identifies this HSM board slot.
- dsx3PortIntervalPortIndex
- A unique value which identifies this port.
- dsx3PortIntervalClear
- This object allows clearing all interval statistics of this port to value of zero. Setting this object to clearRequest will initiate managed entity to clear the statistics of this table.
- dsx3PortIntervalLastClear
- The value of MIB II's sysUpTime object at the time this table statistics is cleared.
- dsx3PortIntervalLossOfSignal
- Total number of Loss of Signals that have been detected on this port since it's cleared by the managing station.
- dsx3PortIntervalOutOfFrame
- Total number of Out of Frames that have been detected on this port since it's cleared by the managing station.
- dsx3PortIntervalAISEvent
- Total number of AIS events that have been detected on this port since it's cleared by the managing station.
- dsx3PortIntervalRedAlarmEvent
- Total number of Red Alarm events that have been detected on this port since it's cleared by the managing station. This object only applies to DS3 interface.
- dsx3PortIntervalFarEndReceiveError
- Total number of far-end receive error events that have been received on this port since it's cleared by the managing station.
- dsx3PortIntervalFarEndBlkError
- Total number of far-end block error events that have been received on this port since it's cleared by the managing station.
- dsx3PortIntervalLineCodeVioEvent
- Total number of line code violation events that have been received on this port. This is a count of both Bipolar Violation (BPV) and Excessive zeros (EXZs) since it's cleared by the managing station.
- dsx3PortIntervalFramingBitError
- Total number of Framing Bit Error events that have been detected on this port since it's cleared by the managing station.
- dsx3PortIntervalChangeOfFrameAlign
- Total number of change of frame alignment events that have been detected on this port since it's cleared by the managing station.
- dsx3PortIntervalParityBitError
- Total number of parity bit errors that have been detected on this port since it's cleared by the managing station.
- dsx3PortIntervalPathParityBitError
- Total number of path parity bit errors that have been detected on this port since it's cleared by the managing station.
- dsx3PortIntervalPlcpLossOfFrame
- Total number of PLCP loss of frame events that have been detected on this port since it's cleared by the managing station. A value of zero is returned if port sublayer is not PLCP.
- dsx3PortIntervalPlcpOutOfFrame
- Total number of PLCP out of frame events that have been detected on this port since it's cleared by the managing station. A value of zero is returned if port sublayer is not PLCP.
- dsx3PortIntervalPlcpYellowAlarm
- Total number of PLCP Yellow Alarms that have been detected detected on this port since it's cleared by the managing station. A value of zero is returned if port sublayer is not PLCP.
- dsx3PortIntervalPlcpFarEndBlkError
- Total number of PLCP Far-end Block Errors that have been detected on this port since it's cleared by the managing station. A value of zero is returned if port sublayer is not PLCP.
- dsx3PortIntervalPlcpFramingError
- Total number of PLCP Framing Octet Errors that have been detected on this port since it's cleared by the managing station. A value of zero is returned if port sublayer is not PLCP.
- dsx3PortIntervalPlcpBIPError
- Total number of PLCP Bit Interleaved Parity Errors that have detected on this port since it's cleared by the managing station. A value of zero is returned if port sublayer is not PLCP.
- dsx3PortIntervalPayloadTypeMismatchError
- Total number of payload type mismatch failure that have been detected on this port since it's cleared by the managing station. This object is applicable to E3 G.832 only. A value of zero is returned if the port is not configured as E3 and G.832.
- dsx3PortIntervalUnequippedError
- Total number of unequipped failure that have been detected on this port sinece it's cleared by the managing station. This object is applicable to E3 G.832 only. A value of zero is returned if the port is not configured as E3 and G.832.
- dsx3PortIntervalTrailTraceIDMismatchError
- Total number of trail trace identification mismatch failure that have been detected on this port since it's cleared by the managing station. This object is applicable to E3 G.832 only. A value of zero is returned if the port is not configured as E3 and G ...
You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now.
Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access.
The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.
