XYLAN-M013-MIB Download

m013ProvisioningTable

A table of provisioning configuration data used to configure an HDLC interface on a DS3 connection.

m013ProvisioningEntry

An entry in the table, containing information about provisioning an HDLC channel on a DS3 connection.

m013SlotIndex

Slot for channel being provisioned.

m013LogicalPortIndex

A per-slot unique HDLC channel number.

m013Description

A user description of this channel.

m013Ds3PortIndex

Physical DS3 port for channel being provisioned.

m013Ds1Fraction

The DS1 channel within the DS3 circuit that is used to create this HDLC channel. An entry of 0 indicates this is a clear channel (full DS3 bandwidth) connection.

m013Ds0Mask

This is a bit mask of the DS0 channels within the selected DS1 fraction that make up the desired HDLC channel. If m013Ds1Fraction is 0 this value has no meaning

m013IfIndex

A per-switch unique number for this HDLC channel. This number is a combination of Slot and Logical Port numbers.

m013Protocol

The L2 protocol that is used on this HDLC channel.

m013EntryStatus

Value used for the control of the creation of this interface.

m013ServiceTable

A table of M013 services status and parameter information.

m013ServiceEntry

An entry in the table, containing information about the M013 services.

m013ServiceSlotIndex

A unique value which identifies this HSM board slot.

m013ServiceLogicalPortIndex

A per-slot unique value which identifies this HDLC logical port.

m013ServiceNumber

The unique service number for this particular slot/logical port.

m013ServiceTableEntryType

The type of table entry for this M013 Serivce. A static entry is one that is stored in non-volatile memory. A dynamic entry is one that is automatically created for an unconfigured virtual circuit based on the the type of service (bridging or trunking) an ...

m013ServiceDescription

A description for this M013 service.

m013ServiceType

The service type.

m013ServiceOperStatus

The service operational status.

m013ServiceAdminStatus

The service adminstration status.

m013ServiceVirtualCircuit

The virtual circuit for this service. In case of PPP it should be set to zero, in case of Frame Relay - to the appropriate DLCI value.

m013ServiceVlans

The Vlans for this service. Interpret this as a 16 bit field per vlan: Trunking 1-32, Bridging 1, IP 1

m013ServiceBridgingMode

The default Briding Mode, 0 = BRIDGE_ALL, 1 = ETHERNET ONLY

m013FrxPortTable

A table of port layer status and parameter information for the UNI's logical interface.

m013FrxPortEntry

An entry in the table, containing information about the logical layer of a UNI interface.

m013FrxPortSlotIndex

A unique value which identifies this HSM board slot.

m013FrxPortPortIndex

A per-slot unique value which identifies this HDLC logical port.

m013FrxPortDescription

A description for this Frame Relay port.

m013FrxPortAdminStatus

If set to enabled, enables Frame Relay Interface. If set to disabled, disables Frame Relay Interface

m013FrxPortDefaultIpRoutingAdminStatus

If set to enabled, enables Default IP Routing. If set to disabled, disables Default IP Routing

m013FrxPortDefaultBridgingAdminStatus

If set to enabled, enables Default Bridging. If set to disabled, disables Default Bridging.

m013FrxPortDefaultBridgingVLAN

The default VLAN for new PVCs that have not been configured for the Bridging Service. A value of zero(0) indicates that unconfigured VCs will not perform a bridging service and will discard all bridged format frames received or transmitted. A non-zero val ...

m013FrxPortDefaultBridgingMode

The default Briding Mode, 0 = BRIDGE_ALL, 1 = ETHERNET ONLY

m013FrxPortDynamicVCCreation

If set to enabled, enables Dynamic VC creation. If set to disabled, disables Dynamic VC creation.

m013FrxVcControlTable

A table of Frame Relay virtual circuit configuration and control information.

m013FrxVcControlEntry

An entry in the table, containing information about the Frame Relay virtual circuit statistics.

m013FrxVcControlSlotIndex

A unique value which identifies this HSM board slot.

m013FrxVcControlPortIndex

A per-slot unique value which identifies this HDLC logical port.

m013FrxVcControlDlci

A unique value which identifies this Data Link Connection Identifier (DLCI) for this Frame Relay Virtual Circuit.

m013FrxVcControlIpRoutingAdminStatus

If set to enabled, enables IP Routing. If set to disabled, disables IP Routing

m013FrxVcStatsTable

A table of Frame Relay virtual circuit statistics information.

m013FrxVcStatsEntry

An entry in the table, containing information about the Frame Relay virtual circuit statistics.

m013FrxVcStatsSlotIndex

A unique value which identifies this HSM board slot.

m013FrxVcStatsPortIndex

A per-slot unique value which identifies this HDLC logical port.

m013FrxVcStatsDlci

A unique value which identifies this Data Link Connection Identifier (DLCI) for this Frame Relay Virtual Circuit.

m013FrxVcStatsTxIPOctets

The total number of transmitted octets (including the Frame Relay Header field) within routed IP format frames on this virtual circuit.

m013FrxVcStatsTxIPFrames

The total number of transmitted routed IP format frames on this virtual circuit.

m013FrxVcStatsRxIPOctets

The total number of received octets (including the Frame Relay Header field) within routed IP format frames on this virtual circuit.

m013FrxVcStatsRxIPFrames

The total number of received routed IP format frames on this virtual circuit.

m013FrxVcStatsTxIPXOctets

The total number of transmitted octets (including the Frame Relay Header field) within routed IPX format frames on this virtual circuit.

m013FrxVcStatsTxIPXFrames

The total number of transmitted routed IPX format frames on this virtual circuit.

m013FrxVcStatsRxIPXOctets

The total number of received octets (including the Frame Relay Header field) within routed IPX format frames on this virtual circuit.

m013FrxVcStatsRxIPXFrames

The total number of received routed IPX format frames on this virtual circuit.

m013FrxVcStatsTxBPDUOctets

The total number of transmitted octets (including the Frame Relay Header field) within BPDU frames on this virtual circuit.

m013FrxVcStatsTxBPDUFrames

The total number of transmitted BPDU frames on this virtual circuit.

m013FrxVcStatsRxBPDUOctets

The total number of received octets (including the Frame Relay Header field) within BPDU frames on this virtual circuit.

m013FrxVcStatsRxBPDUFrames

The total number of received BPDU frames on this virtual circuit.

m013FrxVcStatsTxEthernetOctets

The total number of transmitted octets (including the Frame Relay Header field) within bridged 802.3 format frames on this virtual circuit.

m013FrxVcStatsTxEthernetFrames

The total number of transmitted bridged 802.3 format frames on this virtual circuit.

m013FrxVcStatsRxEthernetOctets

The total number of received octets (including the Frame Relay Header field) within bridged 802.3 format frames on this virtual circuit.

m013FrxVcStatsRxEthernetFrames

The total number of received bridged 802.3 format frames on this virtual circuit.

m013FrxVcStatsTx8025Octets

The total number of transmitted octets (including the Frame Relay Header field) within 8025 frames on this virtual circuit.

m013FrxVcStatsTx8025Frames

The total number of transmitted 8025 frames on this virtual circuit.

m013FrxVcStatsRx8025Octets

The total number of received octets (including the Frame Relay Header field) within 8025 frames on this virtual circuit.

m013FrxVcStatsRx8025Frames

The total number of received 8025 frames on this virtual circuit.

m013FrxVcStatsTxFDDIOctets

The total number of transmitted octets (including the Frame Relay Header field) within FDDI frames on this virtual circuit.

m013FrxVcStatsTxFDDIFrames

The total number of transmitted FDDI frames on this virtual circuit.

m013FrxVcStatsRxFDDIOctets

The total number of received octets (including the Frame Relay Header field) within FDDI frames on this virtual circuit.

m013FrxVcStatsRxFDDIFrames

The total number of received FDDI frames on this virtual circuit.

m013PppxConfigTable

A table of PPP protocol entity configuration information.

m013PppxConfigEntry

An entry in the PPP Entity Configuration table, containing information about PPP protocol configuration.

m013PppxConfigSlotIndex

A unique value which identifies this HSM board slot.

m013PppxConfigPortIndex

A per-slot unique value which identifies this HDLC logical port.

m013PppxConfigDescription

A description for this PPP port.

m013PppxConfigAdminStatus

This object controls the Administrative Status of this PPP Entity. Enabled will allow the PPP Entity to operate. Disabled will disable the PPP Entity without deleting it. Delete will disable the PPP entity and delete the PPP configuration record.

m013PppxConfigMode

This object controls whether or not Multilink PPP will be used.

m013PppxConfigIpConfigAdminStatus

The immediate desired status of the IP network protocol. Setting this object to open will inject an administrative open event into the IP network protocol's finite state machine. Setting this object to close will inject an administrative close event into ...

m013PppxConfigBcpConfigAdminStatus

The immediate desired status of the BCP network protocol. Setting this object to open will inject an administrative open event into the BCP network protocol's finite state machine. Setting this object to close will inject an administrative close event int ...

m013PppxConfigIpxConfigAdminStatus

The immediate desired status of the IPX network protocol. Setting this object to open will inject an administrative open event into the IPX network protocol's finite state machine. Setting this object to close will inject an administrative close event int ...

m013PppxConfigRemoteIpAddress

The Remote IP address of the PPP connection. If set to 0.0.0.0 and IP routing is enabled then the IP address will be learned during the IP LCP negotiation. If set to a value then no IP address negotiation will occur.

m013PppxConfigAuthenticationType

The desired Authentication protocol to use for this PPP connection.

m013PppxConfigUserIdToRemote

User ID sent to remote during PAP or CHAP Authentication. If this string is empty, then no local to remote authentication will occur.

m013PppxConfigPasswordToRemote

Password sent to remote during PAP or CHAP Authentication. If this string is empty, then no local to remote authentication will occur.

m013PppxConfigUserIdFromRemote

User ID expected to be received remote during PAP or CHAP Authentication. If this string is empty, then no remote to local authentication will be required.

m013PppxConfigPasswordFromRemote

Password expected to be received remote during PAP or CHAP Authentication. If this string is empty, then no remote to local authentication will be required.

m013PppxConfigMaxFailureCount

PPP LCP and NCP Negotiation Maximum Failure Count

m013PppxConfigMaxConfigureCount

PPP LCP Negotiation Maximum Configure Count

m013PppxConfigMaxTerminateCount

PPP LCP Negotiation Maximum Terminate Count

m013PppxConfigRetryTimeout

PPP LCP Negotiation Retry Timeout

m013PppxCpTable

A table of PPP connection Link Control and Network Control Protocol status and statistics information.

m013PppxCpEntry

An entry in the table, containing information about the PPP LCP and NCP status and statistics.

m013PppxCpSlotIndex

A unique value which identifies this WSM board slot that the PPP Control Protocol Entity is running on.

m013PppxCpPortIndex

A per-slot unique value which identifies this HDLC logical port.

m013PppxCpIpOperStatus

The operational status of the IP network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the Opened state.

m013PppxCpIpxOperStatus

The operational status of the IPX network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the Opened state.

m013PppxCpBcpOperStatus

The operational status of the BCP network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the Opened state.

m013PppxCpTxLcpPackets

The total number of transmitted Link Control Protocol packets on this PPP connection.

m013PppxCpRxLcpPackets

The total number of received Link Control Protocol packets on this PPP connection.

m013PppxCpTxIpcpPackets

The total number of transmitted IP Control Protocol packets on this PPP connection.

m013PppxCpRxIpcpPackets

The total number of received IP Control Protocol packets on this PPP connection.

m013PppxCpTxIpxcpPackets

The total number of transmitted IPX Control Protocol packets on this PPP connection.

m013PppxCpRxIpxcpPackets

The total number of received IPX Control Protocol packets on this PPP connection.

m013PppxCpTxBcpPackets

The total number of transmitted Bridge Control Protocol packets on this PPP connection.

m013PppxCpRxBcpPackets

The total number of received Bridge Control Protocol packets on this PPP connection.

m013PppxStatsTable

A table of PPP connection statistics information.

m013PppxStatsEntry

An entry in the table, containing information about the PPP PPP connection statistics.

m013PppxStatsSlotIndex

A unique value which identifies this HSM board slot that this PPP link is running on.

m013PppxStatsPortIndex

A per-slot unique value which identifies HDLC channel that this PPP link is running on.

m013PppxStatsTxIPOctets

The total number of transmitted octets (including the PPP Header field) within routed IP format packets on this PPP connection.

m013PppxStatsTxIPPackets

The total number of transmitted routed IP format packets on this PPP connection.

m013PppxStatsRxIPOctets

The total number of received octets (including the PPP Header field) within routed IP format packets on this PPP connection.

m013PppxStatsRxIPPackets

The total number of received routed IP format packets on this PPP connection.

m013PppxStatsTxIPXOctets

The total number of transmitted octets (including the PPP Header field) within routed IPX format packets on this PPP connection.

m013PppxStatsTxIPXPackets

The total number of transmitted routed IPX format packets on this PPP connection.

m013PppxStatsRxIPXOctets

The total number of received octets (including the PPP Header field) within routed IPX format packets on this PPP connection.

m013PppxStatsRxIPXPackets

The total number of received routed IPX format packets on this PPP connection.

m013PppxStatsTxBPDUOctets

The total number of transmitted octets (including the PPP Header field) within BPDU packets on this PPP connection.

m013PppxStatsTxBPDUPackets

The total number of transmitted BPDU packets on this PPP connection.

m013PppxStatsRxBPDUOctets

The total number of received octets (including the PPP Header field) within BPDU packets on this PPP connection.

m013PppxStatsRxBPDUPackets

The total number of received BPDU packets on this PPP connection.

m013PppxStatsTxEthernetOctets

The total number of transmitted octets (including the PPP Header field) within bridged 802.3 format packets on this PPP connection.

m013PppxStatsTxEthernetPackets

The total number of transmitted bridged 802.3 format packets on this PPP connection.

m013PppxStatsRxEthernetOctets

The total number of received octets (including the PPP Header field) within bridged 802.3 format packets on this PPP connection.

m013PppxStatsRxEthernetPackets

The total number of received bridged 802.3 format packets on this PPP connection.

m013PppxStatsTx8025Octets

The total number of transmitted octets (including the PPP Header field) within 8025 packets on this PPP connection.

m013PppxStatsTx8025Packets

The total number of transmitted 8025 packets on this PPP connection.

m013PppxStatsRx8025Octets

The total number of received octets (including the PPP Header field) within 8025 packets on this PPP connection.

m013PppxStatsRx8025Packets

The total number of received 8025 packets on this PPP connection.

m013PppxStatsTxFDDIOctets

The total number of transmitted octets (including the PPP Header field) within FDDI packets on this PPP connection.

m013PppxStatsTxFDDIPackets

The total number of transmitted FDDI packets on this PPP connection.

m013PppxStatsRxFDDIOctets

The total number of received octets (including the PPP Header field) within FDDI packets on this PPP connection.

m013PppxStatsRxFDDIPackets

The total number of received FDDI packets on this PPP connection.

m013IPRouterIfTable

A list of M013 Router instances in this physical OmniSwitch.

m013IPRouterIfEntry

A VLAN entry.

m013IPRouterIfSlotIndex

Slot for channel being provisioned.

m013IPRouterIfLogicalPortIndex

A per-slot unique HDLC channel number.

m013IPRouterIfAddress

The IP address for this IP interface

m013IPRouterIfSubNetMask

The IP network subnet mask for this IP interface

m013IPRouterIfBcastAddress

The IP broadcast address for this IP interface

m013IPRouterIfDescription

Textual description of the router instance.

m013IPRouterIfAdmStatus

The particular routing environment can be enable(1) or disable(2) (or delete (3)) upon user's request.

m013IPRouterIfOperStatus

Provide operating status of a particular router envirnment.

m013IPRouterIfFramingType

Provides the ability to set the outbound frame type for IP traffic. The default frame type is Ethernet. If the frame type is incompatible with the transmitting media, appropriate translation will be performed at egress.

m013IPRouterIfMtu

Provides the ability to set the MTU size for this IP interface. The default size is 1500

m013IPRouterIfProtocol

The routing protocol(s) for this m013 router port. Which are: ipOther(1), ipRip(2), ipOspf(4), ipBgp(8), ipHello(16), ipIs-is(32)

m013Dsx3ConfigTable

The DS3 Configuration table.

m013Dsx3ConfigEntry

An entry in the DS3 Configuration table.

m013Dsx3LineIndex

This object is the identifier of a DS3 port on a managed device.

m013Dsx3ChannelizedMode

This object controls whether or not DS3 port is channelized. The default mode is enabled which means that this port is channelized to 28 T1s.

m013Dsx3MdlEIC

MDL Equipment Identification Code (EIC).

m013Dsx3MdlLIC

MDL Location Identification Code (LIC).

m013Dsx3MdlFIC

MDL Frame Identification Code (FIC).

m013Dsx3MdlUNIT

MDL Unit Identification Code (UNIT).

m013Dsx3MdlPFI

MDL Path Facility Identification Code (PFI).

m013Dsx3MdlPortIdleSignalCode

MDL Port Idle Signal Code

m013Dsx3MdlGenerator

MDL Generator.

m013Dsx3MdlTransmitPath

Enables the MDL path message transmission.

m013Dsx3MdlTransmitIdleSignal

Enables the MDL idle signal message transmission.

m013Dsx3MdlTransmitTestSignal

Enables the MDL test signal message transmission.

m013Dsx3FEACEnable

Allows the DS3 to send the following alarms on the FEAC channel when detected locally: - DS3 Equipment Failure - LOS - OOF - AIS Received .

m013Dsx3REIEnable

Allows the DS3 to send Remote Error Indications.

m013Dsx3RxMdlEnable

Allows the DS3 to receive MDL messages.

m013Dsx3RxMdlEIC

Received MDL Equipment Identification Code (EIC).

m013Dsx3RxMdlLIC

Received MDL Location Identification Code (LIC).

m013Dsx3RxMdlFIC

Received MDL Frame Identification Code (FIC).

m013Dsx3RxMdlUNIT

Received MDL Unit Identification Code (UNIT).

m013Dsx3RxMdlPFI

Received MDL Path Facility Identification Code (PFI).

m013Dsx3RxMdlPortIdleSignalCode

Received MDL Port Idle Signal Code

m013Dsx3RxMdlGenerator

Received MDL Generator.

m013Dsx3RemoteStatus

This variable indicates the Remote Line Status of the interface.

m013Dsx3RemoteStatusLastChange

The value of MIB II's sysUpTime object at the time the Remote DS3/E3 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value.

m013Dsx3LedStatus

The LED state for this M013 Port. M013 module has 5 LEDs per port. The current bit definitions for the DS3 Port are: T3EN 0 - GRN OFF (0 off, 1 on) LOS 1 - RED OFF (0 off, 1 on) OOF 2 - RED OFF (0 off, 1 on) AIS 3 - RED OFF (0 off, 1 on) RAI 4 - YEL OFF ( ...

m013Dsx3StatsEntry

An entry in the DS3 Statistics table.

m013Dsx3StatsLineIndex

This object is the identifier of a DS3 port on a managed device.

m013Dsx3StatsRxREI

The number of Remote Error Indications received.

m013Dsx3StatsRxFEAC

This object indicates the presence FEAC being received by this port. This object only applies to DS3 interface with framing format configured to C-bit parity. A value of dsx3NoFEAC(1) is returned for other cases.

m013Dsx1ConfigTable

The DS1 Configuration table.

m013Dsx1ConfigEntry

An entry in the DS3 Configuration table.

m013Dsx1LineIndex

This object is the identifier of a DS1 port on a managed device.

m013Dsx1T1BertPattern

This variable represents T1 BERT Pattern configuration. The values mean: 1 - 2^15-1, pseudo-random O.151 test pattern (32767-bit long) 2 - 2^20-1, pseudo-random O.151 test pattern (1048575-bit long) 3 - 2^20-QRSS, pseudo-random QRSS O.151 test pattern (1 ...

m013Dsx1T1BertFraming

T1 BERT Framing

m013Dsx1T1BertTestEnable

T1 BERT Start/Stop

m013Dsx1RemoteStatus

This variable indicates the Remote Line Status of the interface.

m013Dsx1RemoteStatusLastChange

The value of MIB II's sysUpTime object at the time the Remote DS1 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value.