XYLAN-NTP-MIB Download

MIBs list

With the IPHost SNMP tool, you can monitor any SNMP objects of the XYLAN-NTP-MIB . You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the XYLAN-NTP-MIB .

OID list for XYLAN-NTP-MIB

xylanNtpEnable: Enables/disables NTP server.
xylanNtpMonitorEnable: Enables/disables NTP monitor.
xylanNtpPeerTable: switch will be associated with.
xylanNtpPeerEntry: Each entry corresponds to a synchronization host.
xylanNtpPeerAddress: The IP address of the synchronization host.
xylanNtpPeerType: with this switch.
xylanNtpPeerAuth: The authorization keyid for the remote host.
xylanNtpPeerVersion: The NTP version to communicate with the remote host.
xylanNtpPeerMinpoll: value is a power of 2 seconds when the poll will occur. For example, 4 (2 to the power 4) is 16 seconds.
xylanNtpPeerPrefer: Marks the host as a preferred connection.
xylanNtpPeerAdmin: If the value written is a 2, the entry is deleted.
xylanNtpPeerName: The DNS name for the peer association,
xylanNtpAuthDelay: that is added to timestamps included in requests to the server that required authentication. Typically this delay is needed in cases of long delay paths, or servers whose clocks are unsynchronized. Value is in milli-seconds
xylanNtpKeysFile: Name of the file which has the authorization keys.
xylanNtpConfigReqKeyId: entity such as timestamp information, statistics, etc. This changes the authentication key identifier for request messages sent from the switch to another NTP entity.
xylanNtpConfigCtlKeyId: of the NTP entity in some fashion. This changes the authentication key identifier for control messages sent from the switch to another NTP entity.
xylanNtpConfigCfgKeyId: NTP entity.
xylanNtpPrecision: This sets the server's advertised precision.
xylanNtpPeerListTable: related to this switch (servers, peers, etc.).
xylanNtpPeerListEntry: Each entry corresponds to one association.
xylanNtpPeerListAddress: The IP address of the association.
xylanNtpPeerListLocal: NTP to the remote association. If this address is 0.0.0.0, then the local address has yet to be determined.
xylanNtpPeerListStratum: number is 16, the remote peer has not been synchronized.
xylanNtpPeerListPoll: The polling interval, in seconds.
xylanNtpPeerListReach: association, in octal format. This number is determined by the NTP algorithm.
xylanNtpPeerListDelay: association, in seconds. This time is determined by the NTP algorithm.
xylanNtpPeerListOffset: association, in seconds. This time is determined by the NTP algorithm.
xylanNtpPeerListDispersion: association, in seconds. This time is determined by the NTP algorithm.
xylanNtpPeerListSynced: entity.
xylanNtpPeerListName: The DNS name for the peer association,
xylanNtpLocalInfo: switch's implementation of NTP.
xylanNtpInfoPeer: The IP address of the remote association.
xylanNtpInfoMode: The peer mode of this remote association.
xylanNtpInfoLeapIndicator: this association.
xylanNtpInfoStratum: If this number is 16, the remote peer has not been synchronized.
xylanNtpInfoPrecision: It will be a number between -4 and -20.
xylanNtpInfoDistance: the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds.
xylanNtpInfoDispersion: the maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds.
xylanNtpInfoReferenceId: reference clock. Can be an IP address.
xylanNtpInfoReferenceTime: was last set or corrected.
xylanNtpInfoFrequency: in relation to a reference clock's Pulse per Second (PPS). If the clock is running in perfect synchronization, this number should be 1. Otherwise, it will be slightly lower or higher in order to compensate for the time differ-ence.
xylanNtpInfoStability: reference clock's Pulse per Second (PPS).
xylanNtpInfoBroadcastDelay: The broadcast delay, in seconds, of this association.
xylanNtpInfoAuthDelay: association.
xylanNtpPeerShowTable: related to this switch (servers, peers, etc.).
xylanNtpPeerShowEntry: Each entry corresponds to one association.
xylanNtpPeerShowRemote: The IP address of the remote association.
xylanNtpPeerShowLocal: remote associations.
xylanNtpPeerShowHmode: The host mode of this remote association.
xylanNtpPeerShowPmode: The peer mode of this remote association.
xylanNtpPeerShowStratum: The stratum level of the remote peer.
xylanNtpPeerShowPrecision: which is a number from -4 to -20.
xylanNtpPeerShowLeapIndicator: this association.
xylanNtpPeerShowReferenceId: this association. Normally an IP address.
xylanNtpPeerShowRootDistance: the total roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds.
xylanNtpPeerShowRootDispersion: the maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds.
xylanNtpPeerShowPpoll: The poll time for this association when it is a peer.
xylanNtpPeerShowHpoll: The poll time for this association when it is a host.
xylanNtpPeerShowKeyid: key used to generate the message authentication code.
xylanNtpPeerShowVersion: What version of NTP this association is using.
xylanNtpPeerShowAssociation: associated with the switch.
xylanNtpPeerShowValid: samples remaining in the filter register.
xylanNtpPeerShowReach: reachability status of this peer.
xylanNtpPeerShowUnreach: The number of times this NTP entity was unreachable.
xylanNtpPeerShowFlash: peer and are most handy for diagnosing problems.
xylanNtpPeerShowBroadcastOffset: The broadcast delay.
xylanNtpPeerShowTTL: in seconds and the mode (unicast, multicast, or broadcast) of NTP messages sent to a broadcast address.
xylanNtpPeerShowTimer: The time to next poll.
xylanNtpPeerShowFlags: for this NTP entity. 0x01 - Configured 0x02 - System Peer 0x10 - Preferred 0x20 - Authentable.
xylanNtpPeerShowReferenceTime: the local clock was last updated.
xylanNtpPeerShowOriginateTime: the peer when its latest NTP message was sent.
xylanNtpPeerShowReceiveTime: the latest NTP message from the peer arrived.
xylanNtpPeerShowTransmitTime: which the last NTP message was sent from this association.
xylanNtpPeerShowOffset: association, in seconds.
xylanNtpPeerShowDelay: association, in seconds.
xylanNtpPeerShowDispersion: association, in seconds.
xylanNtpPeerShowName: The DNS name for the peer association,
xylanNtpStatsStat: The local server statistics.
xylanNtpStatsStatUptime: been associated with the switch.
xylanNtpStatsStatReset: local NTP server has been restarted.
xylanNtpStatsStatBadStratum: corrupted stratum bit in the data of the packet.
xylanNtpStatsStatOldVersion: of an older version of NTP (either version 1 or 2).
xylanNtpStatsStatNewVersion: version 3 of NTP.
xylanNtpStatsStatUnknownVersion: version was unknown (most likely due to packet corruption).
xylanNtpStatsStatBadLength: fit the NTP packet structure (most likely due to packet corruption).
xylanNtpStatsStatProcessed: The total number of NTP packets processed.
xylanNtpStatsStatBadAuth: did not meet authentication standards.
xylanNtpStatsStatLimitRejects: did not meet authentication standards.
xylanNtpStatsPeerTable: Table containing the synchronization host statistics.
xylanNtpStatsPeerEntry: Each entry corresponds to a synchronization host.
xylanNtpStatsPeerAddress: The IP address of the synchronization host.
xylanNtpStatsPeerLocal: NTP to the remote association.
xylanNtpStatsPeerLastRcv: The time since the last packet was received.
xylanNtpStatsPeerNextSend: The time until the next packet is to be sent.
xylanNtpStatsPeerReachChange: The time that the peer has been reachable.
xylanNtpStatsPeerPacketsSent: The number of packets that have been sent.
xylanNtpStatsPeerPacketsRcvd: The number of packets that have been received.
xylanNtpStatsPeerBadAuth: authentication.
xylanNtpStatsPeerBogusOrigin: The number of bogus packets.
xylanNtpStatsPeerDuplicate: The number of duplicated packets received.
xylanNtpStatsPeerBadDispersion: The number bad dispersions.
xylanNtpStatsPeerBadRefTime: The number of bad reference times received.
xylanNtpStatsPeerCandidateOrder: The order of synchronization candidates.
xylanNtpStatsPeerReset: Resets the statistics for the peer.
xylanNtpStatsPeerName: The DNS name for the peer association,
xylanNtpStatsLoop: the phase of timestamps as processed by the local clock. The loop filter examines timestamps sent to and from the local clock and can adjust them to account for natural wander and jitter.
xylanNtpStatsLoopOffset: association, in seconds. This counter indicates the offset of the peer clock relative to the local clock.
xylanNtpStatsLoopFrequency: in relation to a reference clocks Pulse per Second (PPS). If the clock is running in perfect synchronization, this number should be 1. Otherwise, it will be slightly lower or higher in order to compensate for the time discrepancy between the reference clo ...
xylanNtpStatsLoopPollAdjust: Determines the peer polling time.
xylanNtpStatsLoopWatchdog: Makes sure that NTP timer continues to run.
xylanNtpStatsIo: NTP packets for this switch.
xylanNtpStatsIoReset: The number of seconds since the last restart of NTP.
xylanNtpStatsIoRcvBuffers: used by this NTP entity.
xylanNtpStatsIoFreeRcvBuffers: The number of free receive buffers.
xylanNtpStatsIoUsedRcvBuffers: The number of receive buffers currently being used.
xylanNtpStatsIoRefills: The number of times we added packets.
xylanNtpStatsIoDroppedPackets: The number of packets dropped.
xylanNtpStatsIoIgnoredPackets: The number of packets ignored.
xylanNtpStatsIoRcvPackets: switch.
xylanNtpStatsIoSentPackets: The total number of NTP packets sent by the switch.
xylanNtpStatsIoNotSentPackets: due to restrictions.
xylanNtpStatsIoInterrupts: in the process of transmitting or receiving.
xylanNtpStatsIoInterruptsRcv: handler.
xylanNtpStatsReset: subsystems: 0x01 - all peers 0x02 - i/o 0x04 - system 0x08 - memory 0x10 - timer 0x20 - authentication 0x40 - control
xylanNtpStatsMonitorTable: Table containing the association monitoring list.
xylanNtpStatsMonitorEntry: Each entry corresponds to a synchronization host.
xylanNtpStatsMonitorIndex: Table index.
xylanNtpStatsMonitorAddress: The IP address of the remote association.
xylanNtpStatsMonitorPort: The IP port number of the association.
xylanNtpStatsMonitorLocalAddress: The local IP address of the association.
xylanNtpStatsMonitorCount: this association.
xylanNtpStatsMonitorMode: to the switch.
xylanNtpStatsMonitorVersion: The version of NTP the association is using.
xylanNtpStatsMonitorDrop: association that were dropped.
xylanNtpStatsMonitorLast: has been received from this association.
xylanNtpStatsMonitorFirst: has been received from this association.
xylanNtpStatsMonitorName: The DNS name for the peer association,
xylanNtpAccessKeyIdTable: Table containing the trusted keys.
xylanNtpAccessKeyIdEntry: Entry of a trusted key.
xylanNtpAccessKeyIdKeyId: Keyid of the key in the key file.
xylanNtpAccessKeyIdAdmin: If the value written is a 2, the entry is deleted.
xylanNtpAccessRestrictedTable: Table containing the restricted addresses.
xylanNtpAccessRestrictedEntry: Entry of a restricted address.
xylanNtpAccessRestrictedIpAddress: IP address to restrict.
xylanNtpAccessRestrictedMask: IP mask to restrict.
xylanNtpAccessRestrictedRestrictions: to the entry. 0x0001 - ignore, Ignore all packets from hosts. 0x0002 - noquery, Ignore all NTP information queries and configuration requests from the source. 0x0004 - nomodify, Ignore all NTP information queries and configuration requests that attempt to ...
xylanNtpAccessRestrictedCount: Number of packets matched.
xylanNtpAccessRestrictedAdmin: If the value written is a 2, the entry is deleted.
xylanNtpAccessRereadKeyFile: existing keys in the file into the switch's memory.

You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list