ZYXEL-SESCOMMON-MIB Download
With the IPHost SNMP tool, you can monitor any SNMP objects of the
ZYXEL-SESCOMMON-MIB
. You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables,
their current values and descriptions taken from the
ZYXEL-SESCOMMON-MIB
.
OID list for ZYXEL-SESCOMMON-MIB
- sesLineStatusTable
- This table contains the current status of SHDSL line. These managed objects are supported by ZyXEL SDSL access switches.
- sesLineStatusEntry
- An zyxelLineStatusEntry containing the specific status for a particular SHDSL interface.
- sesLineUptime
- The time duration since the connection between STU-C STU-R is last setup.
- sesLineLinkDown
- The number of link down since the SAM-1008 was last restarted.
- sesLineNMdefect
- Count of noise margin defects
- sesLineHECdefect
- Count of HEC defects
- sesLineTxPackets
- Count of line Tx packets
- sesLineRxPackets
- Count of line Rx packets
- sesLineTxFrames
- Count of line Tx frames
- sesLineRxFrames
- Count of line Rx frames
- sesLineTxCells
- Count of line Tx cells
- sesLineRxCells
- Count of line Rx cells
- sesMaxNumOfProfiles
- The maximum number of SHDSL profiles which the system supports.
- sesLineConfTable
- This table includes common attributes describing the SHDSL line.
- sesLineConfEntry
- An entry in sesLineConfTable.
- sesLineConfEncap
- The encapsulation of the SHDSL line.
- sesLineConfVpi
- The VPI of the SHDSL line.
- sesLineConfVci
- The VCI of the SHDSL line.
- sesMaxNumOfPortBondings
- The maximum number of port bondings which the system supports.
- sesPortBondingTable
- This table includes the configuration of port bonding.
- sesPortBondingEntry
- An entry in sesPortBondingTable.
- sesPortBondingName
- This object is used by the port bonding table in order to identify a row of this table.
- sesPortBondingNumOfMembers
- The number of members included in the bonding entry.
- sesPortBondingMemberList
- The member list is included in the bonding entry. Each member is identified by two octets. In the 2-wire mode, each member stands for a single port. In the 4-wire mode, each member stands for a 4-wire group. In the 8-wire mode, each member stands for a 8- ...
- sesPortBondingMode
- The mode in which the bonding entry is. twoWireC mode stands for 2-wire plus stu-c, and so on.
- sesPortBondingRowStatus
- To delete an existing row in this table.
- sesNwireTable
- This table includes N-wire configurations.
- sesNwireEntry
- An entry in sesNwireTable.
- sesNwireGroupName
- This object is used by the N-wire table in order to identify a row of this table.
- sesNwireGroupNumber
- The group number included in the N-wire entry. Each group is identified by two octets. In the 4-wire mode: Group1 stands for Port1 and Port2 Group2 stands for Port3 and Port4 Group3 stands for Port5 and Port6 Group4 stands for Port7 and Port8 In the 8-wir ...
- sesNwireMode
- The mode in which the N-wire entry is. fourWireC mode stands for 4-wire plus stu-c, and so on.
- sesNwireRowStatus
- To delete an existing row in this table.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access.
The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.
