clj8500 Download

energy-star

Returns or changes the Energy Star sleep value. If the value is greater than zero, then the device will go into energy saving sleep mode after the print engine has been idle for the number of seconds specified by this object. A value of zero means Energy ...

sleep-mode

Returns eTrue if the device is in energy saving sleep mode, otherwise returns eFalse. Setting SLEEP-MODE to eFalse causes the device to wake up, if it is in sleep mode. Setting SLEEP-MODE to eTrue causes the device to go into sleep mode. Additional info ...

on-off-line

To bring the PDL processing sub-system on or off line. If the device is a printer, then the printer does not process print job data when the printer is off line. PML communication persists. Additional information: When the printer is in the Offline state, ...

continue

A device can support a class of errors called continuable errors. When a continuable error is encountered, the device requires a continue event to occur before the device will continue operation. One continue event is setting the CONTINUE object to eIni ...

auto-continue

Indicates if the device will automatically continue after encountering a continuable error. If AUTO- CONTINUE is set to eOn, the device will automatically generate continue event to acknowledge continuable errors. If AUTO-CONTINUE is set to eOff, then s ...

job-input-auto-continue-timeout

The number of seconds the device waits after a job related continuable error occurs before automatically continuing. An example job related continuable error is the job requesting a media size that is not available. After the timeout expires, the device ...

job-input-auto-continue-mode

Returns or sets the device behavior when the desired media is not currently available. cCancelJob - The device cancels the job. The device POS should explain what happens if this item is not the only item in the collection. cAutoMediaSizeOverride - The d ...

background-status-msg-line1-part1

The string displayed on the device's front panel in place of the printer's built-in background status string. An example built-in background status string is '00 READY'. Additional information: The display size for the CLJ8500 printer is 2 by 16. The val ...

background-status-msg-line2-part1

The string displayed on the device's front panel in place of the printer's built-in background status string. An example built-in background status string is '00 READY'. Additional information: See BACKGROUND-STATUS-MSG-LINE1-PART1

error-log-clear

Setting this object clears all the entries in the error log sub-tree.

job-output-auto-continue-timeout

Returns or sets the time that the printer will wait after an output bin becomes full and the printer is trying to deliver a sheet of media to that output bin. When the timeout expires, the job is processed according to the OUTBINn-OVERRIDE-MODE. A value ...

collated-originals-support

Indicates that the printer can create multiple, collated 'originals' of a job and shows the level of support for this capability. cCollatedOriginals - The printer can create multiple collated originals, or 'mopies'. This is the base functionality require ...

model-number

Identifies the device model number as listed in the HP corporate price list (e.g. C2121A for DeskJet 500C). The string is as specific as possible. Products should note in POS if the model number on the CPL changes but the device reports the previous mod ...

model-name

Identifies the device model name (e.g. ''DeskJet 1200C''). The string is as specific as possible. Capitalization and spacing should match family naming conventions. Products should note in POS if the model name on the HP corporate price list changes bu ...

serial-number

Identifies the serial number for the device. If the SERIAL-NUMBER object is set by the user, then setting the object does not need to be protected. If the SERIAL-NUMBER object is set at the factory, then the SERVICE-PASSWORD object must be set correctly ...

device-name

User defined device name. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as possible and will return the . Additional information: The maximum supported string ...

device-location

User defined device location. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as possible and will return the . Additional information: The maximum supported str ...

asset-number

User defined asset number. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as possible and will return the . Additional information: The maximum supported string ...

simm1-type

Returns an indication of the type of option installed in SIMM slot 1. eEmpty means the device did not detect any option installed in the interface slot. eUnknown means the device doesn't recognize the installed option. eUnSupported means the device recogn ...

simm1-capacity

Returns an indication of the capacity of the SIMM installed in SIMM slot 1. The capacity is dependent on the type of option, as indicated by the SIMM1-TYPE object. This object has no meaning if the installed option type is eUnknown or eReadOnlyMemory. ...

simm2-type

Returns an indication of the type of option installed in SIMM slot 2. See SIMM1-TYPE for a description.

simm2-capacity

Returns an indication of the capacity of the SIMM installed in SIMM slot 2. See SIMM1-CAPACITY for a description. Additional information: Returns an indication of the capacity of the installed option in bytes. This object is not supported unless the SIM ...

simm3-type

Returns an indication of the type of option installed in SIMM slot 3. See SIMM1-TYPE for a description.

simm3-capacity

Returns an indication of the capacity of the SIMM installed in SIMM slot 3. See SIMM1-CAPACITY for a description. Additional information: Returns an indication of the capacity of the installed option in bytes. This object is not supported unless the SIM ...

simm4-type

Returns an indication of the type of option installed in SIMM slot 4. See SIMM1-TYPE for a description.

simm4-capacity

Returns an indication of the capacity of the SIMM installed in SIMM slot 4. See SIMM1-CAPACITY for a description. Additional information: Returns an indication of the capacity of the installed option in bytes. This object is not supported unless the SIM ...

simm5-type

Returns an indication of the type of option installed in SIMM slot 5. See SIMM1-TYPE for a description.

simm5-capacity

Returns an indication of the capacity of the SIMM installed in SIMM slot 5. See SIMM1-CAPACITY for a description. Additional information: Returns an indication of the capacity of the installed option in bytes. This object is not supported unless the SIM ...

simm6-type

Returns an indication of the type of option installed in SIMM slot 6. See SIMM1-TYPE for a description.

simm6-capacity

Returns an indication of the capacity of the SIMM installed in SIMM slot 6. See SIMM1-CAPACITY for a description. Additional information: Returns an indication of the capacity of the installed option in bytes. This object is not supported unless the SIM ...

simm7-type

Returns an indication of the type of option installed in SIMM slot 7. See SIMM1-TYPE for a description.

simm7-capacity

Returns an indication of the capacity of the SIMM installed in SIMM slot 7. See SIMM1-CAPACITY for a description. Additional information: Returns an indication of the capacity of the installed option in bytes. This object is not supported unless the SIM ...

simm8-type

Returns an indication of the type of option installed in SIMM slot 8. See SIMM1-TYPE for a description.

simm8-capacity

Returns an indication of the capacity of the SIMM installed in SIMM slot 8. See SIMM1-CAPACITY for a description. Additional information: Returns an indication of the capacity of the installed option in bytes. This object is not supported unless the SIM ...

mio1-model-name

Returns product information identifying the I/O card. Example: XXXX

mio1-manufacturing-info

Returns information describing the manufacture of the I/O card installed in MIO/EIO slot 1. May include serial number and firmware revision. Additional information: The format of the string returned is determined by the manufacturer of the MIO card. Ther ...

mio1-type

Returns an indication of the type of option installed in MIO/EIO slot 1. See SIMM1-TYPE for an explanation of the enumerations. Additional information: Returns an indication of the type of option installed in MIO/EIO slot 1. See SIMM1-TYPE for explanatio ...

mio2-model-name

Returns product information identifying the I/O card. Example: XXXX

mio2-manufacturing-info

Returns information describing the manufacture of the I/O card installed in MIO/EIO slot 2. May include serial number and firmware revision. Additional information: The format of the string returned is determined by the manufacturer of the MIO card. Ther ...

mio2-type

Returns an indication of the type of option installed in MIO/EIO slot 2. See SIMM1-TYPE for an explanation of the enumerations. Additional information: Returns an indication of the type of option installed in MIO/EIO slot 2. See MIO1-TYPE for an explanat ...

phd1-type

Returns an indication of the type of option installed in this particular SIMM interface See SIMM1-TYPE for an explanation of the enumerations. Additional information: CLJ8500 doesn't support envelope feeder but software reserves PHD1 for envelope feeder. ...

phd2-model

Returns product information identifying PHD device 2. Additional information: If at least one (1) external paper handling device is attached to the printer, then this object will exist. Not applicable if the value of PHD2-TYPE is eEmpty. Returns product i ...

phd2-manufacturing-info

Returns information describing the manufacture of PHD 2. May include serial number and firmware revision. Additional information: If at least one (1) external paper handling device is attached to the printer, then this object will exist. Not applicable if ...

phd2-type

Returns an indication of the type of option installed in PHD interface 2. See SIMM1-TYPE for an explanation of the enumerations. Additional information: External paper handling devices are connected to the printer in a daisy-chained fashion. PHD2 refers ...

phd2-capacity

Returns an indication of the capacity of the installed option. See SIMM1-CAPACITY for an explanation of the meaning of the value of this object. Additional information: If at least one (1) external paper handling device (EPHD) is attached to the printer, ...

phd3-model

Returns product information identifying PHD device 3. Additional information: If at least two (2) external paper handling devices are attached to the printer, then this object will exist. Not applicable if the value of PHD3-TYPE is eEmpty.

phd3-manufacturing-info

Returns information describing the manufacture of PHD 3. May include serial number and firmware revision. Additional information: If at least two (2) external paper handling devices are attached to the printer, then this object will exist. Not applicable ...

phd3-type

Returns an indication of the type of option installed in PHD interface 3. See SIMM1-TYPE for an explanation of the enumerations. Additional information: External paper handling devices are connected to the printer in a daisy-chained fashion. PHD3 refers ...

phd3-capacity

Returns an indication of the capacity of the installed option. See SIMM1-CAPACITY for an explanation of the meaning of the value of this object. Additional information: If at least two (2) external paper handling devices (EPHD) are attached to the printe ...

phd4-type

Returns an indication of the type of option installed in PHD interface 4. See SIMM1-TYPE for an explanation of the enumerations. Additional information: External paper handling devices are connected to the printer in a daisy-chained fashion. PHD4 refers ...

phd5-type

Returns an indication of the type of option installed in PHD interface 5. See SIMM1-TYPE for an explanation of the enumerations. Additional information: External paper handling devices are connected to the printer in a daisy-chained fashion. PHD5 refers ...

phd6-type

Returns an indication of the type of option installed in PHD interface 6. See SIMM1-TYPE for an explanation of the enumerations. Additional information: External paper handling devices are connected to the printer in a daisy-chained fashion. PHD6 refers ...

self-test

Writing this object allows a device self test to be started. Reading this object provides an indication what self-test is currently executing, if any. Actual self-test operation is device specific. A self test may not be allowed at any arbitrary time. ...

print-internal-page

Writing this object to a value other than eNotPrintingAnInternalPage causes the device to attempt to print an internally generated page. Reading this object provides an indication what internally generated page is currently being printed, if any. The ac ...

cancel-job

Cancels the print job whose ID matches the value written to the CANCEL-JOB object. The host first learns the job ID using the CURRENT-JOB-PARSING-ID command. If the printer has completely processed the job, the printer responds with . If the ...

job-info-change-id

Returns the current value of an object in the job-info sub-tree whose value has changed. Define the object identifier for the object whose value has changed as job-info.required-field.optional-field.job-id. job-info represents the OID prefix of all obje ...

current-job-parsing-id

Contains the printer assigned job identification for the job currently being processed by the processing PDL sub- system. The job ID is a monotonically increasing number. The job ID may be reset to zero at power-up and may roll over to zero after reachi ...

job-info-name1

Contains the first part of this print job's name. The last OID field for this dynamic object contains the job ID. Additional information: The job name is the string specified by the NAME= parameter of the @PJL JOB command which allows a maximum of 80 cha ...

job-info-name2

Contains the second part of this print job's name. The last OID field for this dynamic object contains the job ID. Additional information: See JOB-INFO-NAME1.

job-info-stage

Indicates what printer sub-systems are currently processing this print job. The last OID field for this dynamic object contains the job ID. cSourceSubsystem - some of the job is in the printer I/O subsystem. cProcessingSubsystem - some of the job is in ...

job-info-io-source

Indicates which I/O source, the print job was received over. The value maps to port numbering scheme supported in the DEVICE/SOURCE-SUBSYSTEM/IO/PORTS sub-tree.

job-info-pages-processed

Indicates the number of pages processed by the processing subsystem. If neither the cSourceSubsystem or the cProcessingSubsystem items are in the associated JOB-INFO-STAGE object, then this object contains the total number of pages processed for this job ...

job-info-pages-printed

Indicates the number of pages printed by the destination subsystem. If non of the cSourceSubsystem, cProcessingSubsystem or cDestinationSubsystem items are in the associated JOB-INFO-STAGE object, then this object contains the total number of pages print ...

job-info-size

Indicates the number of bytes of data processed by the processing subsystem. If neither of the cSourceSubsystem or cProcessingSubsystem items are in the associated JOB-INFO-STAGE object, then this object contains the size of this job, in bytes. The last ...

job-info-state

Indicates the state of the job. The last OID field for this dynamic object contains the job ID. eAborted - the print job was aborted. eWaitingForResources - the print job requires resources that are not currently available. Example resources that can ca ...

job-info-outcome

Indicates if any warning or error conditions were encountered while processing the assoicated job. The last OID field for this dynamic object contains the job ID.

job-info-outbins-used

Indicates which output bins this job has delivered printed pages to. The last OID field for this dynamic object contains the job ID. Additional information: The bins designated by this collection include the printer's own output bins as well as the 'logi ...

job-info-attr-1

Returns the value that was set in PJL via the SET JOBATTR= command. Attribute objects are saved sequentially, starting with 1, after the start of a job. If more attributes are set than there are objects to store them, the excess JOBATTR values are ignore ...

job-info-attr-2

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-3

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-4

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-5

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-6

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-7

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-8

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-9

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-10

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-11

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-12

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-13

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-14

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-15

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-16

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-17

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-18

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-19

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-20

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-21

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-22

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-23

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-24

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-25

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-26

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-27

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-28

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-29

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-30

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-31

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-attr-32

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details.

job-info-requested-originals

The number of requested collated copies. The value was supplied with the job via PJL QTY variable, the PostScript Collate and NumCopies entries in the page device dictionary, or via some other mechansim.

job-info-page-count-current-original

The page number being printed within the current copy of a collated multi-copy job. This value changes when the job-info-pages-printed changes. The job-info-pages- printed indicates the total number of pages printed in the job, while this object indicat ...

job-info-pages-in-original

Number of pages in a single copy of a collated multi- copy job.

job-info-printed-originals

Number of collated copies completely printed and delivered to the output bin at time of query. Additional information: Number of collated copies completly printed at time of query.

error1-time-stamp

Contains some sort of time stamp indicating when error 1 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. A ...

error1-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: Contains a device specific error code. A value of zero means 'no error ...

error2-time-stamp

Contains some sort of time stamp indicating when error 2 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. A ...

error2-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error3-time-stamp

Contains some sort of time stamp indicating when error 3 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. A ...

error3-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error4-time-stamp

Contains some sort of time stamp indicating when error 4 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. A ...

error4-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error5-time-stamp

Contains some sort of time stamp indicating when error 5 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. A ...

error5-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error6-time-stamp

Contains some sort of time stamp indicating when error 6 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. A ...

error6-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error7-time-stamp

Contains some sort of time stamp indicating when error 7 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. A ...

error7-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error8-time-stamp

Contains some sort of time stamp indicating when error 8 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. A ...

error8-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error9-time-stamp

Contains some sort of time stamp indicating when error 9 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. A ...

error9-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error10-time-stamp

Contains some sort of time stamp indicating when error 10 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error10-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error11-time-stamp

Contains some sort of time stamp indicating when error 11 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error11-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error12-time-stamp

Contains some sort of time stamp indicating when error 12 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error12-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error13-time-stamp

Contains some sort of time stamp indicating when error 13 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error13-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error14-time-stamp

Contains some sort of time stamp indicating when error 14 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error14-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error15-time-stamp

Contains some sort of time stamp indicating when error 15 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error15-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error16-time-stamp

Contains some sort of time stamp indicating when error 16 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error16-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error17-time-stamp

Contains some sort of time stamp indicating when error 17 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error17-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error18-time-stamp

Contains some sort of time stamp indicating when error 18 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error18-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error19-time-stamp

Contains some sort of time stamp indicating when error 19 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error19-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error20-time-stamp

Contains some sort of time stamp indicating when error 20 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error20-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error21-time-stamp

Contains some sort of time stamp indicating when error 21 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error21-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error22-time-stamp

Contains some sort of time stamp indicating when error 22 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error22-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error23-time-stamp

Contains some sort of time stamp indicating when error 23 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error23-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error24-time-stamp

Contains some sort of time stamp indicating when error 24 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error24-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error25-time-stamp

Contains some sort of time stamp indicating when error 25 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error25-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error26-time-stamp

Contains some sort of time stamp indicating when error 26 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error26-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error27-time-stamp

Contains some sort of time stamp indicating when error 27 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error27-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error28-time-stamp

Contains some sort of time stamp indicating when error 28 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error28-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error29-time-stamp

Contains some sort of time stamp indicating when error 29 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error29-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error30-time-stamp

Contains some sort of time stamp indicating when error 30 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error30-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error31-time-stamp

Contains some sort of time stamp indicating when error 31 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error31-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error32-time-stamp

Contains some sort of time stamp indicating when error 32 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error32-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error33-time-stamp

Contains some sort of time stamp indicating when error 33 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error33-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error34-time-stamp

Contains some sort of time stamp indicating when error 34 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error34-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error35-time-stamp

Contains some sort of time stamp indicating when error 35 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error35-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error36-time-stamp

Contains some sort of time stamp indicating when error 36 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error36-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error37-time-stamp

Contains some sort of time stamp indicating when error 37 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error37-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error38-time-stamp

Contains some sort of time stamp indicating when error 38 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error38-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error39-time-stamp

Contains some sort of time stamp indicating when error 39 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error39-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error40-time-stamp

Contains some sort of time stamp indicating when error 40 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error40-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error41-time-stamp

Contains some sort of time stamp indicating when error 41 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error41-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error42-time-stamp

Contains some sort of time stamp indicating when error 42 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error42-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error43-time-stamp

Contains some sort of time stamp indicating when error 43 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error43-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error44-time-stamp

Contains some sort of time stamp indicating when error 44 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error44-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error45-time-stamp

Contains some sort of time stamp indicating when error 45 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error45-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error46-time-stamp

Contains some sort of time stamp indicating when error 46 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error46-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error47-time-stamp

Contains some sort of time stamp indicating when error 47 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error47-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error48-time-stamp

Contains some sort of time stamp indicating when error 48 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error48-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error49-time-stamp

Contains some sort of time stamp indicating when error 49 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error49-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

error50-time-stamp

Contains some sort of time stamp indicating when error 50 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error50-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE.

io-timeout

The amount of time, in seconds, to wait for more print job data to be received before an I/O timeout occurs. The I/O channel being timed is the I/O channel that received the data associated with the current print job. If an I/O timeout occurs, the PDL pro ...

io-switch

Indicates if the device will switch between I/O channels when a job boundary is encountered and print job data is available on another I/O channel.

io-buffering

Returns or controls the manner in which the device performs I/O data buffering. I/O data buffering allows additional print job data to be buffered by the I/O sub- system in an effort to allow the computer sending the data to perform other tasks and to ke ...

io-buffer-size

Returns or configures the amount of memory, in bytes, dedicated to I/O print job data buffering. Attempting to set to an unsupported value causes the device to use the closest supported value. Each device POS should document the list of supported values ...

maximum-io-buffering-memory

This object's name is misleading. Returns the maximum amount of additional memory, in bytes, that can be dedicated to buffering print job data. Additional information: Memory for I/O Buffering is allocated in increments of 102400 bytes. Therefore, for ea ...

port1-parallel-speed

Returns or changes the maximum parallel I/O port speed, for port 1. This object is only supported if this port is a parallel port. An eSlow setting causes a 10 us busy pulse per received byte of data. An eFast setting causes a 1.5 us busy pulse per rec ...

port1-parallel-bidirectionality

Returns or changes whether the parallel I/O port supports bidirectional communication for port 1. This object is only supported if this port is a parallel port. Additional information: CLJ8500 will always be bi-directional. Thus, having this object here ...

default-copies

Returns or changes default copies. Default copies is the default values used by the PDL to control the number of copies of each page in the print job that are printed. The print job can override this value. The list of supported values should be docume ...

resource-saving

Returns or changes PDL resource saving. Resource saving stores a PDL's permanent soft resources, like fonts, even when another PDL is active. Resource saving is also called environment saving. When eOff, resource saving is disabled. When ON, resource ...

maximum-resource-saving-memory

This object's name is misleading. This object returns the maximum amount of additional memory, in bytes, that can be dedicated to holding PDL permanent soft resources. Additional information: Base memory for CLJ8500 is 32MB. Memories for PostScript and P ...

default-vertical-black-resolution

Returns or changes the value of the default vertical black resolution. The units are dots per inch. Additional information: In CLJ8500 changing this OID also causes DEFAULT-HORIZONTAL-BLACK-RESOLUTION to change. DEFAULT-HORIZONTAL-BLACK-RESOLUTION and DE ...

default-horizontal-black-resolution

Returns or changes the value of the default horizontal black resolution. The units are dots per inch. Additional information: In CLJ8500 changing this OID also causes DEFAULT- VERTICAL-BLACK RESOLUTION to change. DEFAULT- HORIZONTAL-BLACK-RESOLUTION and ...

default-page-protect

Returns or changes the default page protection behavior. If eOff, the device does not reserve memory for holding the entire raster form of a processed page. If eOn, then memory is reserved. If eAuto, the device determines the amount of memory to reserve ...

default-lines-per-page

Returns or changes the default number of lines per page. The POS indicates the supported values. An unsupported value causes the printer to use the closest supported value, causing the printer to return the . Additional information: The supporte ...

default-vmi

Returns or changes the default vertical motion index. The unit of measure for VMI is centipoints per line. The POS indicates the supported values. An unsupported value causes the printer to use the closest supported value, causing the printer to return < ...

default-media-size

This indicates the default media size. A write of an unsupported value causes an . Complete list of supported media sizes along with their dimensions are listed in the ''Media Size Table'' near the end of this document.

cold-reset-media-size

Returns or sets the media size that is used as the DEFAULT-MEDIA-SIZE when a cold reset occurs.

default-media-name

Returns or sets the media name that is used until the media name is changed by a print job command. Additional information: This string must be one of the MEDIAn-NAME objects.

form-feed-needed

Indicates if the PDL processing sub-system has made marks on the current page and the source subsystem has been idle for a device specific amount of time. Additional information: This object in CLJ8500 will never go to true.

pcl-resource-saving-memory-size

Returns or changes the amount of resource saving memory set aside to hold permanent soft PCL resources. Additional information: The value returned by this object is the amount of Resource Saving memory currently dedicated to PCL. If a value is received th ...

pcl-total-page-count

Total number of PCL pages printed by the device. Additional information: In CLJ8500 the PCL page count is kept in NVRAM however the NVRAM value is only updated every 10 pages. NOTE: The value returned by this OID will be incremented every page but if powe ...

pcl-default-font-height

Returns or changes the default PCL height. Height is an approximate measure of the body of the type in centipoints. A centipoint is 1/7200 inch. Height applies only to proportional fonts. Point size, in points, can be converted to font height, in cent ...

pcl-default-font-source

Returns or changes the value of the default font source variable in NVRAM.

pcl-default-font-number

Returns or changes the value of the default font number variable in NVRAM. Writing an unsupported value causes the printer to generate an .

pcl-default-font-width

Returns or changes the default PCL font width. Width is expressed as the width of a character in centipoints. A centipoint is 1/7200 inch. Width applies only to fixed space fonts. Pitch, in character per inch, can be converted to font width, in centip ...

postscript-resource-saving-memory-size

Returns or changes the amount of resource saving memory set aside to hold permanent soft PostScript resources. Additional information: The value returned by this object is the amount of Resource Saving memory currently dedicated to PostScript. If a value ...

postscript-total-page-count

Total number of PostScript pages printed by the device. Additional information: In CLJ8500 the count is kept in NVRAM however the NVRAM value is only updated every 10 sheets. NOTE: The value returned by this OID will be incremented every sheet but if powe ...

postscript-print-errors

Returns or changes the value of the print PostScript errors setting. If eOn, PostScript prints an error page showing the error encountered and the stack at the time of the error.

postscript-jam-recovery

Returns or changes the PostScript jam recovery setting. If eOn, then the device will reprint PostScript pages, if those pages jam. Additional information: Returns the Postscript jam recovery setting. If eOn, then the device will reprint PostScript pages, ...

pjl-password

Returns PJL password, if the password is not set (zero). If the password is set, then attempting to retrieve the password causes an to occur and will return the .

total-color-page-count

Total number of color pages printed by the device. Additional information: Any page with one or more color pixels is counted as a color page. Pages that only contain black marks are not counted by this object. The counter will roll over to zero after 4,29 ...

duplex-page-count

Total number of sheets of media that have been duplex printed. A sheet is counted if it travels through the duplex page path, regardless of whether or not marks are made on the page. The POS will indicate if the value is kept in NVRAM. Additional inform ...

mp-tray

Returns or changes the value of the multi-purpose (MP) tray configuration variable. The MP tray can be configured to operate as an additional input tray (eCassette), a manual feed slot (eManual), or in a manner compatible with the LaserJet III manual fee ...

tray1-media-size-loaded

Returns the media size that is currently configuredconfigured in tray #1. This object can be set to indicate the media size currently loaded, if the printer supports input trays that can not sense the media size. Complete list of supported media sizes a ...

tray1-phd

Provides the number of the Paper Handling Device that contains this input tray.

tray2-media-size-loaded

Returns the media size that is currently configured in tray #2. Complete list of supported media sizes along with their dimensions are listed in the ''Media Size Table'' near the end of this document. Additional information: If the tray drawer is open, a ...

tray2-phd

Provides the number of the Paper Handling Device that contains this input tray.

tray3-media-size-loaded

Returns the media size that is currently configured in tray #3. Complete list of supported media sizes along with their dimensions are listed in the ''Media Size Table'' near the end of this document. Additional information: The Media Size Table does not ...

tray3-phd

Provides the number of the Paper Handling Device that contains this input tray.

tray4-media-size-loaded

Returns the media size that is currently configured in tray #4. Complete list of supported media sizes along with their dimensions are listed in the ''Media Size Table'' near the end of this document. Additional information: The Media Size Table does not ...

tray4-phd

Provides the number of the Paper Handling Device that contains this input tray.

tray5-phd

Provides the number of the Paper Handling Device that contains this input tray.

overflow-bin

Returns or sets the bin that will be used for additional sheets of media when the current bin is full and printing is allowed to continue. Additional information: If this object is set to zero, overflowing to another bin is not allowed.

outbin1-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin2-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin3-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin3-phd

Provides the number of the Paper Handling Device that contains this output bin.

outbin4-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin4-phd

Provides the number of the Paper Handling Device that contains this output bin.

outbin5-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin5-phd

Provides the number of the Paper Handling Device that contains this output bin.

outbin6-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin6-phd

Provides the number of the Paper Handling Device that contains this output bin.

outbin7-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin7-phd

Provides the number of the Paper Handling Device that contains this output bin.

outbin8-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin8-phd

Provides the number of the Paper Handling Device that contains this output bin.

outbin9-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin9-phd

Provides the number of the Paper Handling Device that contains this output bin.

outbin10-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin10-phd

Provides the number of the Paper Handling Device that contains this output bin.

outbin11-override-mode

Returns or sets the device behavior when this output bin condition causes printing to stop. cCancelJob - The device cancels the job. cOutbinFullOverride - The device sends subsequent media to the overflow bin. cOutbinAttentionOverride - The device ignores ...

outbin11-phd

Provides the number of the Paper Handling Device that contains this output bin.

low-marking-agent-processing

Returns or changes how the device processes a low marking agent event. If eCont, then the device continues to print. If eStop, then the device stops until a continue event occurs.

default-ret

Returns or changes the Resolution Enhancement Technology setting. Devices that only support eOff and on should map all other values to on and always return the same non-eOff value to indicate on. The list of supported values should be documented in the ...

default-print-quality

Returns or sets the default print quality. A value of zero has the lowest print quality. A value of 100 has the highest print quality. Each POS should document what values in the 0 to 100 range are supported. Additional information: In CLJ8500, the sup ...

phd2-device-specific-command

This object is used to send device-specific data to the paper handling device. The meaning of the device- specific command is dependent on the paper handling device and must be specified in the POS. If the paper handling device does not accept the comman ...

phd2-device-memory

This object is used to read the current values stored in shared memory available from the paper handling device. Additional information: If at least one external paper handling devices are attached to the printer, then this object will exist. Not applicab ...

phd3-device-specific-command

This object is used to send device-specific data to the paper handling device. The meaning of the device- specific command is dependent on the paper handling device and must be specified in the POS. If the paper handling device does not accept the comman ...

phd3-device-memory

This object is used to read the current values stored in shared memory available from the paper handling device. Additional information: If at least two external paper handling devices are attached to the printer, then this object will exist. Not applicab ...

media-names-available

The value of this object controls which of the MEDIAx- NAME objects are supported. If a bit is set to zero, then attempting to get or set the corresponding MEDIAx- NAME objects will return . Additional information: Setting a bit to one will c ...

media1-name

Media 1 name. Additional information: The symbol set for this string is Roman-8.

media1-short-name

Length restricted version of the media name 1. The length restriction is required to allow the media name to be displayed on the device's control panel. The device POS must state the maximum number of characters allowed. If the device also has a limita ...

media1-page-count

Number of sheets of media 1 that have been printed. The device POS should state whether this value is lost across a power cycle or kept in NVRAM. Additional information: In CLJ8500 the media page count saved in NVRAM after every 10 pages. The maximum val ...

media2-name

Media 2 name. Additional information: See MEDIA1-NAME.

media2-short-name

Length restricted version of the media name 2. See MEDIA1-SHORT-NAME for details.

media2-page-count

Number of sheets of media 2 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media3-name

Media 3 name. Additional information: See MEDIA1-NAME.

media3-short-name

Length restricted version of the media name 3. See MEDIA1-SHORT-NAME for details.

media3-page-count

Number of sheets of media 3 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media4-name

Media 4 name. Additional information: See MEDIA1-NAME.

media4-short-name

Length restricted version of the media name 4. See MEDIA1-SHORT-NAME for details.

media4-page-count

Number of sheets of media 4 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media5-name

Media 5 name. Additional information: See MEDIA1-NAME.

media5-short-name

Length restricted version of the media name 5. See MEDIA1-SHORT-NAME for details.

media5-page-count

Number of sheets of media 5 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media6-name

Media 6 name. Additional information: See MEDIA1-NAME.

media6-short-name

Length restricted version of the media name 6. See MEDIA1-SHORT-NAME for details.

media6-page-count

Number of sheets of media 6 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media7-name

Media 7 name. Additional information: See MEDIA1-NAME.

media7-short-name

Length restricted version of the media name 7. See MEDIA1-SHORT-NAME for details.

media7-page-count

Number of sheets of media 7 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media8-name

Media 8 name. Additional information: See MEDIA1-NAME.

media8-short-name

Length restricted version of the media name 8. See MEDIA1-SHORT-NAME for details.

media8-page-count

Number of sheets of media 8 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media9-name

Media 9 name. Additional information: See MEDIA1-NAME.

media9-short-name

Length restricted version of the media name 9. See MEDIA1-SHORT-NAME for details.

media9-page-count

Number of sheets of media 9 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media10-name

Media 10 name. Additional information: See MEDIA1-NAME.

media10-short-name

Length restricted version of the media name 10. See MEDIA1-SHORT-NAME for details.

media10-page-count

Number of sheets of media 10 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media11-name

Media 11 name. Additional information: See MEDIA1-NAME.

media11-short-name

Length restricted version of the media name 11. See MEDIA1-SHORT-NAME for details.

media11-page-count

Number of sheets of media 11 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media12-name

Media 12 name. Additional information: See MEDIA1-NAME.

media12-short-name

Length restricted version of the media name 12. See MEDIA1-SHORT-NAME for details.

media12-page-count

Number of sheets of media 12 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media13-name

Media 13 name. Additional information: See MEDIA1-NAME.

media13-short-name

Length restricted version of the media name 13. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME.

media13-page-count

Number of sheets of media 13 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media14-name

Media 14 name. Additional information: See MEDIA1-NAME.

media14-short-name

Length restricted version of the media name 14. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME.

media14-page-count

Number of sheets of media 14 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media15-name

Media 15 name. Additional information: See MEDIA1-NAME.

media15-short-name

Length restricted version of the media name 15. See MEDIA1-SHORT-NAME for details. Additional information: See MEDIA1-SHORT-NAME.

media15-page-count

Number of sheets of media 15 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

mass-storage-resource-change-counter

A counter which changes when a mass storage based resource has been added or deleted. Additional information: The value of this counter changes each time the MASS-STORAGE-RESOURCE-CHANGED object is set to eTrue. The value also changes when the mass stora ...

mass-storage-resource-changed

Setting to eTrue causes MASS-STORAGE-RESOURCE-CHANGE- COUNTER to be incremented. Additional information: Returns status if attempting to access this object and there is no storage device is installed.

hrdiskstorageaccess

An indication if this long-term storage device is readable and writable or only readable. This should reflect the media type, any write-protect mechanism, and any device configuration that affects the entire device. Refer to RFC 1514, Host Resources MIB, ...

hrdiskstoragemedia

An indication of the type of media used in this long-term storage device. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: Constant. Returns status if attempting to perform a Get on this OID with no mass stora ...

hrdiskstorageremoveble

Denotes whether or not the disk media may be removed from the drive. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: Constant. Returns status if attempting to perform a Get on this OID with no mass storage de ...

hrdiskstoragecapacity

The total size for this long-term storage device. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: The capacity is in Kbytes. Returns status if attempting to perform a Get on this OID with no mass storage devi ...

hrpartitionindex

A unique value for each partition on this long- term storage device. The value for each long-term storage device must remain constant at least from one re-initialization of the agent to the next re- initialization. Refer to RFC 1514, Host Resources MIB, ...

hrpartitionlabel

A textual description of this partition. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: The MS-DOS volume label. The volume label is not writable. Returns status if attempting to perform a Get on this OID w ...

hrpartitionid

A descriptor which uniquely represents this partition to the responsible operating system. On some systems, this might take on a binary representation. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: Constant. The value ...

hrpartitionsize

The size of this partition. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: The capacity is in Kbytes. Returns the same value as hrDiskStorageCapacity. Returns status if attempting to perform a Get on this O ...

hrpartitionfsindex

The index of the file system mounted on this partition. If no file system is mounted on this partition, then this value shall be zero. Note that multiple partitions may point to one file system, denoting that that file system resides on those partitions ...

hrfsindex

A unique value for each file system local to this host. The value for each file system must remain constant at least from one re-initialization of the agent to the next re-initialization. Refer to RFC 1514, Host Resources MIB, for more details. Additiona ...

hrfsmountpoint

The path name of the root of this file system. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: Constant. Returns status if attempting to perform a Get on this OID with no mass storage device installed or if t ...

hrfsremotemountpoint

A description of the name and/or address of the server that this file system is mounted from. This may also include parameters such as the mount point on the remote file system. If this is not a remote file system, this string should have a length of zer ...

hrfstype

The value of this object identifies the type of this file system. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: Constant. Returns status if attempting to perform a Get on this OID with no mass storage devic ...

hrfsaccess

An indication if this file system is logically configured by the operating system to be readable and writable or only readable. This does not represent any local access-control policy, except one that is applied to the file system as a whole. Refer to RF ...

hrfsbootable

A flag indicating whether this file system is bootable. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: Constant. Returns status if attempting to perform a Get on this OID with no mass storage device installe ...

hrfsstorageindex

The index of the hrStorageEntry that represents information about this file system. If there is no such information available, then this value shall be zero. The relevant storage entry will be useful in tracking the percent usage of this file system and ...

hrfslastfullbackupdate

The last date at which this complete file system was copied to another storage device for backup. This information is useful for ensuring that backups are being performed regularly. If this information is not known, then this variable shall have the value ...

hrfslastpartialbackupdate

The last date at which a portion of this file system was copied to another storage device for backup. This information is useful for ensuring that backups are being performed regularly. If this information is not known, then this variable shall have the ...

hrmemorysize

The amount of physical main memory contained by the host. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: The unit of measure for this object is 1024 bytes. The default value assumes the base printer with no additional mem ...

hrstorageindex

A unique value for each logical storage area contained by the host. Refer to RFC 1514, Host Resources MIB, for more details.

hrstoragetype

The type of storage represented by this entry. Refer to RFC 1514, Host Resources MIB, for more details.

hrstoragedescr

A description of the type and instance of the storage described by this entry. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: This object is not localized.

hrstorageallocationunits

The size, in bytes, of the data objects allocated from this pool. If this entry is monitoring sectors, blocks, buffers, or packets, for example, this number will commonly be greater than one. Otherwise this number will typically be one. Refer to RFC 1514 ...

hrstoragesize

The size of the storage represented by this entry, in units of hrStorageAllocationUnits. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: Total formatter RAM. CLJ8500 has 0 byte of memory soldered on the formatter.

hrstorageused

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: This object returns the amount of memory in use by the printer at ...

hrstorageallocationfailures

The number of requests for storage represented by this entry that could not be honored due to not enough storage. It should be noted that as this object has a SYNTAX of Counter, that it does not have a defined initial value. However, it is recommended t ...

hrdeviceindex

A unique value for each device contained by the host. The value for each device must remain constant at least from one re-initialization of the agent to the next re-initialization. Refer to RFC 1514, Host Resources MIB, for more details. Additional infor ...

hrdevicetype

An indication of the type of device. If this value is `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry exists in the hrProcessorTable which corresponds to this device. If this value is `hrDeviceNetwork { hrDeviceTypes 4 }', then an entry exists in th ...

hrdevicedescr

A textual description of this device, including the device's manufacturer and revision, and optionally, its serial number. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: This object is not localized.

hrdeviceid

The product ID for this device. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: The complete OID reported by this object is: .1.3.6.1.4.1.11.2.3.9.1.2.10

hrdevicestatus

The current operational state of the device described by this row of the table. A value unknown(1) indicates that the current state of the device is unknown. running(2) indicates that the device is up and running and that no unusual error conditions are ...

hrdeviceerrors

The number of errors detected on this device. It should be noted that as this object has a SYNTAX of Counter, that it does not have a defined initial value. However, it is recommended that this object be initialized to zero. Refer to RFC 1514, Host Reso ...

hrprinterstatus

The current status of this printer device. When in the idle(1), printing(2), or warmup(3) state, the corresponding hrDeviceStatus should be running(2) or warning(3). When in the unknown state, the corresponding hrDeviceStatus should be unknown(1). Refer ...

hrprinterdetectederrorstate

This object represents any error conditions detected by the printer. The error conditions are encoded as bits in an octet string, with the following definitions: Condition Bit # hrDeviceStatus lowPaper 0 warning(3) noPaper ...

prtgeneralconfigchanges

Counts configuration changes that change the capabilities of a printer, such as the addition/deletion of input/output bins, the addition/deletion of interpreters, or changes in media size. Such changes will often affect the capability of the printer to s ...

prtgeneralcurrentlocalization

The value of the prtLocalizationIndex corresponding to the current language, country, and character set to be used for localized string values that are identified as being dependent on the value of this object. Note that this object does not apply to loc ...

prtgeneralreset

Setting this value to `powerCycleReset', `resetToNVRAM', or `resetToFactoryDefaults' will result in the resetting of the printer. When read, this object will always have the value `notResetting(3)', and a SET of the value `notResetting' shall have no eff ...

prtgeneralcurrentoperator

The name of the person who is responsible for operating this printer. It is suggested that this string include information that would enable other humans to reach the operator, such as a phone number. As a convention to facilitate automatic notification o ...

prtgeneralserviceperson

The name of the person responsible for servicing this printer. It is suggested that this string include information that would enable other humans to reach the service person, such as a phone number. As a convention to facilitate automatic notification of ...

prtinputdefaultindex

The value of prtInputIndex corresponding to the default input sub-unit: that is, this object selects the default source of input media. This value shall be -1 if there is no default input subunit specified for the printer as a whole. In this case, the ac ...

prtoutputdefaultindex

The value of prtOutputIndex corresponding to the default output sub-unit; that is, this object selects the default output destination. This value shall be -1 if there is no default output subunit specified for the printer as a whole. In this case, the ...

prtmarkerdefaultindex

The value of prtMarkerIndex corresponding to the default marker sub-unit; that is, this object selects the default marker.

prtmediapathdefaultindex

The value of prtMediaPathIndex corresponding to the default media path; that is, the selection of the default media path.

prtconsolelocalization

The value of the prtLocalizationIndex corresponding to the language, country, and character set to be used for the console. This localization applies both to the actual display on the console as well as the encoding of these console objects in management ...

prtconsolenumberofdisplaylines

The number of lines on the printer's physical display. This value is 0 if there are no lines on the physical display or if there is no physical display Additional information: Replaces PML DISPLAY-NUMBER-OF-ROWS. The printer has two physical lines on the ...

prtconsolenumberofdisplaychars

The number of characters per line displayed on the physical display. This value is 0 if there are no lines on the physical display or if there is no physical display Additional information: Replaces PML DISPLAY-COLUMN-SIZE.

prtconsoledisable

If the object prtConsoleDisable has value 'operatorConsoleDisabled' then input is not accepted from the operator console. If the object prtConsoleDisable has the value 'operatorConsoleEnabled' then input is accepted from the operator console. If the objec ...

prtcoverdescription

The manufacturer provided cover sub-mechanism name in the localization specified by prtGeneralCurrentLocalization.

prtcoverstatus

The status of this cover sub-unit. Additional information: Replaces PML NOT-READY-DOOR-OPEN.

prtlocalizationlanguage

A two character language code from ISO 639. Examples en, gb, ca, fr, de. Additional information: The languages supported by CLJ8500 are English, French, German, Italian, Spanish, Swedish, Danish, Norwegian, Dutch, Finnish, and Portuguese.

prtlocalizationcountry

A two character country code from ISO 3166, a blank string (two space characters) shall indicate that the country is not defined. Examples: US, FR, DE, ... Additional information: The languages supported by CLJ8500 (and corresponding country) are English ...

prtlocalizationcharacterset

The coded character set used for this localization.

prtstoragerefindex

The value of the hrDeviceIndex of the printer device that this storageEntry is associated with.

prtdevicerefindex

The value of the hrDeviceIndex of the printer device that this deviceEntry is associated with.

prtinputtype

The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Optional Input Class provides for a descriptor field to further qualify the other choice. Additional information: Tray 1 is the ...

prtinputdimunit

The unit of measurement for use calculating and relaying dimensional values for this input sub-unit.

prtinputmediadimfeeddirdeclared

This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. The feed direction is the direction in which the media is fed on this sub-unit. This dimension i ...

prtinputmediadimxfeeddirdeclared

This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. The cross feed direction is ninety degrees relative to the feed direction associated with ...

prtinputmediadimfeeddirchosen

The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this value will be used even if the input tray is empty. Feed dimension measurements are taken relative to the feed direction asso ...

prtinputmediadimxfeeddirchosen

The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that this value will be used even if the input tray is empty. The cross feed direction is ninety degrees relative to the feed dir ...

prtinputcapacityunit

The unit of measurement for use in calculating and relaying capacity values for this input sub-unit. Additional information: A sheet is a single piece of 20 pound paper.

prtinputmaxcapacity

The maximum capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so this value reflects claimed capacity. If this input sub-unit can reliably sense this value, the va ...

prtinputcurrentlevel

The current capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests; otherwise, the value m ...

prtinputstatus

The current status of this input sub-unit. Additional information: Replaces PML STATUS-TRAY-MISSING and STATUS-TRAY-EMPTY. See SubUnitStatus in RFC1759 Printer MIB for details on values reported by this object. CLJ8500 will not include values Available an ...

prtinputmedianame

A description of the media contained in this input sub-unit; This description is intended for display to a human operator. This description is not processed by the printer. It is used to provide information not expressible in terms of the other media att ...

prtinputname

The name assigned to this input sub-unit. Additional information: Replaces PML TRAYn-NAME.

prtinputvendorname

The vendor name of this input sub-unit.

prtinputmodel

The model name of this input sub-unit. Additional information: Replaces PML objects PHDn-MODEL.

prtinputversion

The version of this input sub-unit. Additional information: Replaces PML objects PHDn-MANUFACTURING-INFO.

prtinputserialnumber

The serial number assigned to this input sub-unit.

prtinputdescription

A free-form text description of this input sub-unit in the localization specified by prtGeneralCurrentLocalization.

prtinputsecurity

Indicates if this input sub-unit has some security associated with it. Additional information: No security mechanism provided.

prtoutputtype

The type of technology supported by this output sub-unit.

prtoutputcapacityunit

The unit of measurement for use in calculating and relaying capacity values for this output sub-unit. Additional information: A sheet is a single piece of 20 pound paper.

prtoutputmaxcapacity

The maximum capacity of this output sub-unit in output sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so this value essentially reflects claimed capacity. If this output sub-unit can reliably sense thi ...

prtoutputremainingcapacity

The remaining capacity of the possible output sub-unit capacity in output sub-unit capacity units (PrtCapacityUnitTC) of this output sub-unit. If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be modifie ...

prtoutputstatus

The current status of this output sub-unit. Additional information: Replaces PML NOT-READY-OUTBIN-MISSING and STATUS-OUTBIN-MISSING. The default values assume all bins are empty. See SubUnitStatus in RFC1759 Printer MIB for details on values reported by t ...

prtoutputname

The name assigned to this output sub-unit. Additional information: Replaces PML OUTBINn-NAME. The characters must be in the range 20H to 7FH except 5C. When this string is displayed on the control panel the Roman-8 symbol set is used. The object for bin 2 ...

prtoutputvendorname

The vendor name of this output sub-unit. Additional information: ::= { prtOutputEntry 8 } SYNTAX OCTET STRING (SIZE(0..63)) ACCESS read-only STATUS optional DESCRIPTION The name assigned to this output sub-unit. Additional information: The value return ...

prtoutputversion

The version of this output sub-unit. Additional information: Returns device-specific information about the configuration of the output bin. May include information about the type of processing that can be done to media sent to this bin; processing include ...

prtoutputserialnumber

The serial number assigned to this output sub-unit.

prtoutputdescription

A free-form text description of this output sub-unit in the localization specified by prtGeneralCurrentLocalization.

prtoutputsecurity

Indicates if this output sub-unit has some security associated with it and if that security is enabled or not. Additional information: No security mechanism provided.

prtoutputstackingorder

The current state of the stacking order for the associated output sub-unit. `FirstToLast' means that as pages are output the front of the next page is placed against the back of the previous page. `LasttoFirst' means that as pages are output the back of t ...

prtoutputpagedeliveryorientation

The reading surface that will be `up' when pages are delivered to the associated output sub-unit. Values are faceUp and faceDown. (Note: interpretation of these values is in general context-dependent based on locale; presentation of these values to an end ...

prtoutputbursting

This object indicates that the outputting sub-unit supports bursting, and if so, whether the feature is enabled. Bursting is the process by which continuous media is separated into individual sheets, typically by bursting along pre-formed perforations.

prtoutputdecollating

This object indicates that the output supports supports decollating, and if so, whether the feature is enabled. Decollating is the process by which the individual parts within a multi-part form are separated and sorted into separate stacks for each part.

prtoutputpagecollated

This object indicates that the output sub-unit supports page collation, and if so, whether the feature is enabled. See glossary for definition of how this document defines collation.

prtoutputoffsetstacking

This object indicates that the output supports supports offset stacking, and if so, whether the feature is enabled. See glossary for how Offset Stacking is defined by this document.

prtmarkermarktech

The type of marking technology used for this marking sub-unit.

prtmarkercounterunit

The unit that will be used by the printer when reporting counter values for this marking sub-unit. The time units of measure are provided for a device like a strip recorder that does not or cannot track the physical dimensions of the media and does not u ...

prtmarkerlifecount

The count of the number of units of measure counted during the life of printer using units of measure as specified by prtMarkerCounterUnit. Additional information: Replaces PML TOTAL-ENGINE-PAGE-COUNT. In CLJ8500 it is kept in NVRAM however the NVRAM valu ...

prtmarkerpoweroncount

The count of the number of units of measure counted since the equipment was most recently powered on using units of measure as specified by prtMarkerCounterUnit.

prtmarkerprocesscolorants

The number of process colors supported by this marker. A process color of 1 implies monochrome. The value of this object and prtMarkerSpotColorants cannot both be 0. The value of prtMarkerProcessColorants must be 0 or greater. Additional information: C ...

prtmarkerspotcolorants

The number of spot colors supported by this marker. The value of this object and prtMarkerProcessColorants cannot both be 0. Must be 0 or greater.

prtmarkeraddressabilityunit

The unit of measure of distances, as applied to the marker's resolution.

prtmarkeraddressabilityfeeddir

The maximum number of addressable marking positions in the feed direction per 10000 units of measure specified by prtMarkerAddressabilityUnit. A value of (-1) implies 'other' or 'infinite' while a value of (-2) implies 'unknown'. Additional information: ...

prtmarkeraddressabilityxfeeddir

The maximum number of addressable marking positions in the cross feed direction in 10000 units of measure specified by prtMarkerAddressabilityUnit. A value of (-1) implies 'other' or 'infinite' while a value of (-2) implies 'unknown'. Additional informat ...

prtmarkernorthmargin

The margin, in units identified by prtMarkerAddressabilityUnit, from the leading edge of the medium as the medium flows through the marking engine with the side to be imaged facing the observer. The leading edge is the North edge and the other edges are d ...

prtmarkersouthmargin

The margin from the South edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by all four margins is guaranteed for all interpreters. The value (-2) means unknown.

prtmarkerwestmargin

The margin from the West edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by all four margins is guaranteed for all interpreters. The value (-2) means unknown.

prtmarkereastmargin

The margin from the East edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by all four margins is guaranteed for all interpreters. The value (-2) means unknown.

prtmarkerstatus

The current status of this marker sub-unit. Additional information: Replaces PML NOT-READY-DESTINATION-PRINT-ENGINE and STATUS-DESTINATION-PRINT-ENGINE. The default value assumes no malfunctions. See SubUnitStatus in RFC1759 Printer MIB for details on val ...

prtmarkersuppliesmarkerindex

The value of prtMarkerIndex corresponding to the marking sub-unit with which this marker supply sub-unit is associated.

prtmarkersuppliescolorantindex

The value of prtMarkerColorantIndex corresponding to the colorant with which this marker supply sub-unit is associated. This value shall be 0 if there is no colorant table.

prtmarkersuppliesclass

Indicates whether this supply entity represents a supply that is consumed or a receptacle that is filled.

prtmarkersuppliestype

The type of this supply.

prtmarkersuppliesdescription

The description of this supply container/receptacle in the localization specified by prtGeneralCurrentLocalization.

prtmarkersuppliessupplyunit

Unit of measure of this marker supply container/receptacle.

prtmarkersuppliesmaxcapacity

The maximum capacity of this supply container/receptacle expressed in prtMarkerSuppliesSupplyUnit. If this supply container/receptacle can reliably sense this value, the value is reported by the printer and is read-only; otherwise, the value may be writte ...

prtmarkersupplieslevel

The current level if this supply is a container; the remaining space if this supply is a receptacle. If this supply container/receptacle can reliably sense this value, the value is reported by the printer and is read-only; otherwise, the value may be writ ...

prtmediapathmaxspeedprintunit

The unit of measure used in specifying the speed of all media paths in the printer.

prtmediapathmediasizeunit

The units of measure of media size for use in calculating and relaying dimensional values for all media paths in the printer.

prtmediapathmaxspeed

The maximum printing speed of this media path expressed in prtMediaPathMaxSpeedUnit's. A value of (-1) implies 'other'. Additional information: Replaces PML PRINT-ENGINE-PERFORMANCE. The page size for this performance is 8.5x11.

prtmediapathmaxmediafeeddir

The maximum physical media size in the feed direction of this media path expressed in units of measure specified by PrtMediaPathMediaSizeUnit. A value of (-1) implies 'unlimited', a value of (-2) implies 'unknown'. Additional information: The value retur ...

prtmediapathmaxmediaxfeeddir

The maximum physical media size across the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (-2) implies 'unknown'. Additional information: The value returned by this object depends on the ...

prtmediapathminmediafeeddir

The minimum physical media size in the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (-2) implies 'unknown'. Additional information: The value returned by this object depends on the valu ...

prtmediapathminmediaxfeeddir

The minimum physical media size across the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (-2) implies 'unknown'. Additional information: The value returned by this object depends on the ...

prtmediapathtype

The type of the media path for this media path. Additional information: Replaces PML DUPLEX-INSTALLED.

prtmediapathdescription

The manufacturer-provided description of this media path in the localization specified by prtGeneralCurrentLocalization.

prtmediapathstatus

The current status of this media path. Additional information: The default values assume the printer is idle. See SubUnitStatus in RFC1759 Printer MIB for details on values reported by this object. CLJ8500 will not include values Available and Standby (2) ...

prtchanneltype

The type of this print data channel. This object provides the linkage to ChannelType-specific groups that may (conceptually) extend the prtChannelTable with additional details about that channel. Additional information: This object, in conjunction with p ...

prtchannelprotocolversion

The version of the protocol used on this channel. The format used for version numbering depends on prtChannelType. Additional information: This object, in conjunction with prtChannelType, replaces the PML object PORTn-DESCRIPTION. MIO-based channels prov ...

prtchannelcurrentjobcntllangindex

The value of prtInterpreterIndex corresponding to the Control Language Interpreter for this channel. This interpreter defines the syntax used for control functions, such as querying or changing environment variables and identifying job boundaries (e.g. P ...

prtchanneldefaultpagedesclangindex

The value of prtInterpreterIndex corresponding to the Page Description Language Interpreter for this channel. This interpreter defines the default Page Description Language interpreter to be used for the print data unless the Control Language is used to ...

prtchannelstate

The state of this print data channel. The value determines whether control information and print data is allowed through this channel or not. Additional information: MIO-based channels provide their own values for this object. The base-printer's port alw ...

prtchannelifindex

The value of ifIndex (in the ifTable; see the interface section of MIB-2/RFC 1213) which corresponds to this channel. When more than one row of the ifTable is relevant, this is the index of the row representing the topmost layer in the interface hierarchy ...

prtchannelstatus

The current status of the channel. Additional information: See SubUnitStatus in RFC1759 Printer MIB for details on values reported by this object. MIO-based channels provide their own values for this object. Status for CLJ8500's parallel port will not inc ...

prtinterpreterlangfamily

The family name of a Page Description Language (PDL) or control language which this interpreter in the printer can interpret or emulate. Additional information: Replaces PCL-NAME and FW-ROM-DATECODE ( sort of). Also provides a place to supply PJL informat ...

prtinterpreterlanglevel

The level of the language which this interpreter is interpreting or emulating. This might contain a value like '5e' for an interpreter which is emulating level 5e of the PCL language. It might contain '2' for an interpreter which is emulating level 2 of ...

prtinterpreterlangversion

The date code or version of the language which this interpreter is interpreting or emulating. Additional information: This is a date code determined by the firmware build engineer. The value of these objects will change from build to build and the final v ...

prtinterpreterdescription

A string to identify this interpreter in the localization specified by prtGeneralCurrentLocalization as opposed to the language which is being interpreted. It is anticipated that this string will allow manufacturers to unambiguously identify their interp ...

prtinterpreterversion

The date code, version number, or other product specific information tied to this interpreter. This value is associated with the interpreter, rather than with the version of the language which is being interpreted or emulated. Additional information: Sam ...

prtinterpreterdefaultorientation

The current orientation default for this interpreter. This value may be overridden for a particular job (e.g., by a command in the input data stream). Additional information: Replaces PML DEFAULT-ORIENTATION. Setting this object for one interpreter will ...

prtinterpreterfeedaddressability

The maximum interpreter addressability in the feed direction in 10000 prtMarkerAddressabilityUnits (see prtMarkerAddressabilityFeedDir ) for this interpreter. The value (-1) means other and specifically indicates that the sub-unit places no restrictions o ...

prtinterpreterxfeedaddressability

The maximum interpreter addressability in the cross feed direction in 10000 prtMarkerAddressabilityUnits (see prtMarkerAddressabilityXFeedDir) for this interpreter. The value (-1) means other and specifically indicates that the sub-unit places no restrict ...

prtinterpreterdefaultcharsetin

The default coded character set for input octets encountered outside a context in which the Page Description Language established the interpretation of the octets. (Input octets are presented to the interpreter through a path defined in the channel group. ...

prtinterpreterdefaultcharsetout

The default character set for data coming from this interpreter through the printer's output channel (i.e. the 'backchannel'). This value shall be (2) if there is no default. Additional information: ::= { prtInterpreterEntry 11 } SYNTAX INTEGER { ePyes(3 ...

prtconsoledisplaybuffertext

The content of a line in the logical display buffer of the operator's console of the printer. When a write operation occurs, normally a critical message, to one of the LineText strings, the agent should make that line displayable if a physical display is ...

prtconsoleontime

This object, in conjunction with prtConsoleOffTime, defines the current status of the light. If both prtConsoleOnTime and prtConsoleOffTime are non-zero, the lamp is blinking and the values presented define the on time and off time, respectively, in mill ...

prtconsoleofftime

This object, in conjunction with prtConsoleOnTime, defines the current status of the light. If both prtConsoleOnTime and prtConsoleOffTime are non-zero, the lamp is blinking and the values presented define the on time and off time, respectively, in milli ...

prtconsolecolor

The color of this light.

prtconsoledescription

The vendor description or label of this light in the localization specified by prtConsoleLocalization.

prtalertseveritylevel

The level of severity of this alert table entry. The printer determines the severity level assigned to each entry into the table. Additional information: The alert table in CLJ8500 will hold up to 233 entries.

prtalerttraininglevel

See textual convention PrtAlertTrainingLevelTC Additional information: The alert table in CLJ8500 will hold up to 233 entries. The value of this object depends on the alert condition as follows: ePuntrained: Paper out. ePtrained: Toner out. ePfieldService ...

prtalertgroup

The type of sub-unit within the printer model that this alert is related. Input, output, and markers are examples of printer model groups, i.e., examples of types of sub-units. Wherever possible, these enumerations match the sub-identifier that identifie ...

prtalertgroupindex

An index of the row within the principle table in the group identified by prtAlertGroup that represents the sub-unit of the printer that caused this alert. The combination of the prtAlertGroup and the prtAlertGroupIndex defines exactly which printer sub- ...

prtalertlocation

The sub-unit location that is defined by the printer manufacturer to further refine the location of this alert within the designated sub-unit. The location is used in conjunction with the Group and GroupIndex values; for example, there is an alert in Inp ...

prtalertcode

See associated textual convention PrtAlertCodeTC Additional information: The alert table in CLJ8500 will hold up to 233 entries.

prtalertdescription

A description of this alert entry in the localization specified by prtGeneralCurrentLocalization. The description is provided by the printer to further elaborate on the enumerated alert or provide information in the case where the code is classified as ` ...