ctron-sfps-l4ss-mib Download

MIBs list

You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the ctron-sfps-l4ss-mib .

OID list for ctron-sfps-l4ss-mib

sfpsL4CPDisableTCPAckCheck: This variable indicates whether or not TCP segments whose ACK bit is off are allowed to use an existing flow table entry. When set to 2, a TCP segment whose ACK bit is off is always treated as an exception packet. This variable takes effect immediately, ...
sfpsL4CPFlowTable: This table describes each conversation between a pair or Layer 3 or Layer 4 endpoints.
sfpsL4CPFlowEntry: Each entry contains statistics and information for a pair of Layer 3 or Layer 4 endpoints.
sfpsL4CPFlowCnxIndex: Index (1-based) of the SFPSGAPI connection table entry to which this flow belongs.
sfpsL4CPFlowSecL3Address: The Layer 3 address of the secondary endpoint for this flow. The secondary endpoint is the one having the higher MAC address.
sfpsL4CPFlowPrimL3Address: The Layer 3 address of the primary endpoint for this flow. The primary endpoint is the one having the lower MAC address.
sfpsL4CPFlowSubprotocol: This value identifies the Layer 4 protocol. It corresponds to the IP 'Protocol' field as described in the 'Assigned Numbers' RFC.
sfpsL4CPFlowSecMatchAnyDyn: If this is a TCP or UDP entry, this value specifies whether or not the protocol port of the secondary endpoint should be treated as a wildcard, able to match any port number above 1023.
sfpsL4CPFlowPrimMatchAnyDyn: If this is a TCP or UDP entry, this value specifies whether or not the protocol port of the primary endpoint should be treated as a wildcard, able to match any port number above 1023.
sfpsL4CPFlowSecProtPort: If this is a TCP or UDP entry, this value indicates the protocol port number of the secondary endpoint. Otherwise, this field is zero.
sfpsL4CPFlowPrimProtPort: If this is a TCP or UDP entry, this value indicates the protocol port number of the primary endpoint. Otherwise, this field is zero.
sfpsL4CPFlowSecSubstApplies: Indication of whether or not MAC address substitution applies to the secondary endpoint for this flow.
sfpsL4CPFlowPrimSubstApplies: Indication of whether or not MAC address substitution applies to the primary endpoint for this flow.
sfpsL4CPFlowSecInPkts: Count of packets transmitted from primary to secondary.
sfpsL4CPFlowSecInOctets: Count of octets transmitted from primary to secondary.
sfpsL4CPFlowPrimInPkts: Count of packets transmitted from secondary to primary.
sfpsL4CPFlowPrimInOctets: Count of octets transmitted from secondary to primary.
sfpsL4CPFlowFlowAge: Time elapsed since this entry was created.
sfpsL4CPFlowFlowLastUse: Time elapsed since this entry was last used to send data.
sfpsL4CPFlowID: The Call Detail Recording flow ID for this flow, or zero if CDR is not active for the flow.
sfpsL4CPMACAddrSubTable: This table provides the ability to override the default gateway for specific routes.
sfpsL4CPMACAddrSubEntry: Each entry contains the MAC address substitution information associated with a specific destination IP address.
sfpsL4CPMACAddrSubDestIP: Destination IP address for this route
sfpsL4CPMACAddrSubNextHopMAC: The next-hop MAC address to use for this route.
sfpsL4CPMACAddrSubRefCount: The number of flow table entries that reference this entry.
sfpsL4CPNetAddrUserTable: This table associates user information with network addresses.
sfpsL4CPNetAddrUserEntry: Each entry contains the user information associated with a specific network address.
sfpsL4CPNetAddrUserProtocol: The network-layer protocol associated with this entry. Values correspond to the 'aoAddressTag' enumeration (see aoproperties.h).
sfpsL4CPNetAddrUserNetAddr: The network-layer address associated with this entry.
sfpsL4CPNetAddrUserLoginID: The login ID from CSM's LoginOID. Set to zero if no user is logged into the address.
sfpsL4CPNetAddrUserUserID: The object ID from CSM's UserOID.
sfpsL4CPNetAddrUserUserName: The user name associated with this entry.
sfpsL4CPIPRouteTable: This table associates IP routes (subnets) with devices.
sfpsL4CPIPRouteEntry: Each entry contains the IP route information associated with a specific device.
sfpsL4CPIPRouteSubnetMask: The subnet mask associated with this route.
sfpsL4CPIPRouteSubnet: The destination subnet of this route.
sfpsL4CPIPRouteRouteID: The object ID from CSM's RouteOID.
sfpsL4CPIPRouteRouteSubsystem: Indicates type of device route.
sfpsL4CPIPRouteDeviceID: The object ID from CSM's DeviceOID.
sfpsL4CPIPRouteDeviceName: The device name for this route.
sfpsL4CPIPRouteMACAddress: The MAC address of the device for this route.
sfpsL4CPIPRouteMetric: The metric associated with this route.
sfpsL4CPIPRouteCallable: Indicates whether or not the device associated with this route is callable for IP.
sfpsL4CPPortTable: This table lists the attributes of an access servers ports.
sfpsL4CPPortEntry: Each entry contains information about one of this access server's ports.
sfpsL4CPPortNum: The logical port number of this port.
sfpsL4CPPortID: The last four octets of CSM's PortOID for this port.
sfpsL4CPPortApplyPolicyIn: Indicates whether or not access policies are to be applied to packets arriving at this port.
sfpsL4CPPortApplyPolicyOut: Indicates whether or not access policies are to be applied to packets sent out this port.
sfpsL4CPPortDefaultUserID: The last four octets of CSM's UserOID for the default userid for this port.
sfpsL4CPPortDefaultUserName: The user name assigned to MAC addresses discovered on this port.
sfpsL4CPCallableDeviceTable: This table lists the attributes of a callable device.
sfpsL4CPCallableDeviceEntry: Each entry contains information about one of this access server's ports.
sfpsL4CPCallableDeviceDeviceID: The last four octets of CSM's DeviceOID for this callable device.
sfpsL4CPCallableDeviceDeviceName: The default device name for this callable device.
sfpsL4CPCallableDeviceDefaultUserName: The default user name for this callable device.
sfpsL4CDRActiveFlowTable: This table lists the currently active flows that have Call Detail Recording enabled.
sfpsL4CDRActiveFlowEntry: Each entry contains information about one flow that has CDR enabled.
sfpsL4CDRActiveFlowFlowID: Flow ID for this flow.
sfpsL4CDRActiveFlowSubProtocol: If this is a Layer 4 flow, this value identifies the Layer 4 protocol (for IP, this value corresponds to the 'Protocol' field as described in the 'Assigned Numbers' RFC). If this is a Layer 3 flow, this value is zero.
sfpsL4CDRActiveFlowEtherType: The Layer 3 protocol represented by this entry. Values correspond to the 'Ether Type' field as described in the Assigned Numbers RFC.
sfpsL4CDRActiveFlowSourceUser: The user name associated with the source of the flow.
sfpsL4CDRActiveFlowSourceMACAddr: The MAC address associated with the source of the flow.
sfpsL4CDRActiveFlowSourceNetAddr: The Layer 3 address associated with the source of the flow.
sfpsL4CDRActiveFlowSourceProtocolPort: If this is a Layer 4 flow, this value indicates the protocol port number of the source of the flow. Otherwise, this field is zero.
sfpsL4CDRActiveFlowSourcePPRangeEnabled: Indicates whether or not any source protocol port number greater than 1023 is considered to match the source protocol port with which this flow was created.
sfpsL4CDRActiveFlowSourceConnNumber: The source connection number.
sfpsL4CDRActiveFlowDestUser: The user name associated with the destination of the flow.
sfpsL4CDRActiveFlowDestMACAddr: The MAC address associated with the destination of the flow.
sfpsL4CDRActiveFlowDestNetAddr: The Layer 3 address associated with the destination of the flow.
sfpsL4CDRActiveFlowDestProtocolPort: If this is a Layer 4 flow, this value indicates the protocol port number of the destination of the flow. Otherwise, this field is zero.
sfpsL4CDRActiveFlowDestPPRangeEnabled: Indicates whether or not any destination protocol port number greater than 1023 is considered to match the destination protocol port with which this flow was created.
sfpsL4CDRActiveFlowDestConnNumber: The destination connection number.
sfpsL4CDRActiveFlowStartTime: The time elapsed since this flow was created.
sfpsL4CDRActiveFlowLastPktTime: The time elapsed since the most recent packet was sent on this flow.
sfpsL4CDRActiveFlowEndTime: The time elapsed since this flow was terminated. This field is not meaningful for active flows.
sfpsL4CDRActiveFlowInOctets: The number of octets that have been sent from the destination to the source.
sfpsL4CDRActiveFlowOutOctets: The number of octets that have been sent from the source to the destination.
sfpsL4CDRActiveFlowInPkts: The number of packets that have been sent from the destination to the source.
sfpsL4CDRActiveFlowOutPkts: The number of packets that have been sent from the source to the destination.
sfpsL4CDRActiveFlowDemandAccessConnMade: Indicates whether or not a demand access connection had to be made for this flow.
sfpsL4CDRActiveFlowFlowRecordState: Indicates the current state of the flow record.
sfpsL4CDRTermedFlowTable: This table lists the terminated flows that had Call Detail Recording enabled.
sfpsL4CDRTermedFlowEntry: Each entry contains information about one flow that had CDR enabled.
sfpsL4CDRTermedFlowFlowID: Flow ID for this flow.
sfpsL4CDRTermedFlowSubProtocol: If this is a Layer 4 flow, this value identifies the Layer 4 protocol (for IP, this value corresponds to the 'Protocol' field as described in the 'Assigned Numbers' RFC). If this is a Layer 3 flow, this value is zero.
sfpsL4CDRTermedFlowEtherType: The Layer 3 protocol represented by this entry. Values correspond to the 'Ether Type' field as described in the Assigned Numbers RFC.
sfpsL4CDRTermedFlowSourceUser: The user name associated with the source of the flow.
sfpsL4CDRTermedFlowSourceMACAddr: The MAC address associated with the source of the flow.
sfpsL4CDRTermedFlowSourceNetAddr: The Layer 3 address associated with the source of the flow.
sfpsL4CDRTermedFlowSourceProtocolPort: If this is a Layer 4 flow, this value indicates the protocol port number of the source of the flow. Otherwise, this field is zero.
sfpsL4CDRTermedFlowSourcePPRangeEnabled: Indicates whether or not any source protocol port number greater than 1023 is considered to match the source protocol port with which this flow was created.
sfpsL4CDRTermedFlowSourceConnNumber: The source connection number.
sfpsL4CDRTermedFlowDestUser: The user name associated with the destination of the flow.
sfpsL4CDRTermedFlowDestMACAddr: The MAC address associated with the destination of the flow.
sfpsL4CDRTermedFlowDestNetAddr: The Layer 3 address associated with the destination of the flow.
sfpsL4CDRTermedFlowDestProtocolPort: If this is a Layer 4 flow, this value indicates the protocol port number of the destination of the flow. Otherwise, this field is zero.
sfpsL4CDRTermedFlowDestPPRangeEnabled: Indicates whether or not any destination protocol port number greater than 1023 is considered to match the destination protocol port with which this flow was created.
sfpsL4CDRTermedFlowDestConnNumber: The destination connection number.
sfpsL4CDRTermedFlowStartTime: The time elapsed since this flow was created.
sfpsL4CDRTermedFlowLastPktTime: The time elapsed since the most recent packet was sent on this flow.
sfpsL4CDRTermedFlowEndTime: The time elapsed since this flow was terminated.
sfpsL4CDRTermedFlowInOctets: The number of octets that have been sent from the destination to the source.
sfpsL4CDRTermedFlowOutOctets: The number of octets that have been sent from the source to the destination.
sfpsL4CDRTermedFlowInPkts: The number of packets that have been sent from the destination to the source.
sfpsL4CDRTermedFlowOutPkts: The number of packets that have been sent from the source to the destination.
sfpsL4CDRTermedFlowDemandAccessConnMade: Indicates whether or not a demand access connection had to be made for this flow.
sfpsL4CDRTermedFlowFlowRecordState: Indicates the current state of the flow record.
sfpsL4CDRFlowIndexTable: This table lists the current flows that have Call Detail Recording enabled.
sfpsL4CDRFlowIndexEntry: Each entry contains information about one flow that has CDR enabled.
sfpsL4CDRFlowIndexFlowID: Flow ID for this flow.
sfpsL4CDRFlowIndexSFPSFlowTblIndex: Index of the SFPS Flow Table entry (1-based) that corresponds to this flow.
sfpsL4CDRFlowIndexSFlowStatsPtr: Pointer to the SFlowStats object for this flow.
sfpsL4CDRFlowIndexStaticFlowInfoPtr: Pointer to the L4CDRStaticFlowInfo object for this flow.
sfpsL4CDRFlowIndexFlowTblEntryPtr: The flow table entry pointer for this flow.
sfpsL4CDRFlowIndexFlowState: Indicates the current state of the flow index record.

You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list