ctron-translation-mib Download

ctTransFddiAtmMtu

When written with a (1), allows SNAP frames up to 4500 bytes in length to be received from the FNB and processed by the ATM SAR component. When this object is written with a (1), a value of (1) for the ctTransFddiAtmIPFrag object must be ignored. When wri ...

ctTransFddiAtmIPFrag

When written with a (1), will fragment IP frames from FDDI to Ethernet before the frame is processed by the ATM SAR component. This object must be ignored when written with a (1) if the ctTransFddiAtmMtu object is written with a (1). When written with a ( ...

ctTransFddiEthernetIPFrag

Enables or disables IP fragmentation from FDDI to any/all Ethernet interfaces.

ctTransFddiSnapEthernetType

The desired frame type to be translated from FDDI to Ethernet. If set to ethernetII(1) all non-IPX frames will be translated to ethernetII. If set to ethernetSnap(2), all non-IPX frames will be translated to ethernet_snap.

ctTransFddiEthernetAuto

Enables or disables the 'Auto-Learn' Translation feature of FDDI to Ethernet frames for the objects below. If enabled, the device will automatically learn the frame type by source address from the Ethernet interfaces. If enabled, IPX FDDI frames destined ...

ctTransFddiEthernetSnapIPX

The desired translation of IPX FDDI SNAP frames to Ethernet.

ctTransFddiEthernet802dot2IPX

The desired translation of IPX FDDI 802.2 frames to Ethernet.

ctTransFddiEthernetMACIPX

The desired translation of IPX FDDI MAC frames to Ethernet.

ctTransEthernetFddiRAW

The desired translation of Ethernet802.3 'RAW' frames to FDDI. This is a device level object meaning Ethernet 'RAW' frames to any/all FDDI interfaces.

ctTransEthernetFddiPadVerify

Selects 802.3 length verfication for Ethernet FDDI frame translation. If set to Enabled(1), the device consults the 802.3 length field to determine the amount of pad to removed regardless of frame size. This setting will cause the device to strip unnecess ...

ctTransRifDbTable

A table containing entries of RIF Database.

ctTransRifDbEntry

This entry for ctTransRifDbTable.

ctTransRifDbMacAddr

The Mac address of a source station in Cabletron cannonical format.

ctTransRifDbSrcPort

The index of the MIB-II interface that hardware address is learned from.

ctTransRifDbLength

This object returns the number of bytes of routing information associated with this entry.

ctTransRifDbRIF

This returns the routing information associated with an entry.

ctTransRifDbCtrlTable

A table containing entries of objects to control RIF database.

ctTransRifDbCtrlEntry

This entry for ctTransRifDbCtrlTable.

ctTransRifDbCtrlPort

The MIB-II interface number of the port for which this entry is administering control over the RIF cache.

ctTransRifDbWeightState

Indicates the type of RIF to be retained in the RIF database. shortestPath (2) is the RIF with the least number of hops. The existing RIF will be replaced if the new RIF is shorter. quickestPath (3) is the 'first seen' RIF. largestMTU (4) is the path th ...

ctTransRifDbCtrlType

Type of RIF to cache. When the explorer option (1) is selected the existing RIF may be replaced only if the received frame is an explorer. When the 'all' option (2) is selected the existing RIF may be replaced for any SR frame received with a valid RIF. ...

ctTransRifDbAgingTimer

The timeout period in seconds for aging out dynamically learned RI Fs. The default for this object is product specific.

ctTransBcastXTable

A list describing the state of the broadcast conversion for each interface on this device. The user will specify two broadcast addresses (per interface), one for the media specific interface one for the cannonical format, that the translation state machin ...

ctTransBcastXEntry

A list of objects pertaining to the state of broadcast conversion for each interface.

ctTransBcastXPort

The MIB-II interface number of the port for which this entry is administering broadcast conversion translation.

ctTransBcastXMode

This object indicates whether the ctTransBcastXMedia and ctTransBcastXCanonical objects pair are valid for this interface.

ctTransBcastXMedia

This object is the media specific broadcast address that this interface will allow translation to/from. This conversion only acts upon the DA of the MAC header when the specified address matches the DA.

ctTransBcastXCanonical

This object is the cannonical broadcast address that this interface will allow translation to/from. This conversion only acts upon the DA of the MAC header when the specified address matches the DA.

ctTransIbmLlcTable

A list describing the state of the IBM LLC translation for each interface on this device.

ctTransIbmLlcEntry

A list of objects pertaining to the state of IBM LLC translation for each interface.

ctTransIbmLlcPort

The MIB-II interface number of the port for which this entry is administering IBM LLC translation.

ctTransIbmLlcNullMode

IBM networks systems have a special translation called 'IBM LLC Encapsulation' which is used for translating IBM LLC based protocols between Token Ring and Ethernet Version 2.0 (DIXE) format. This translation does not apply when going between Token Ring a ...

ctTransIbmLlcSnaPathMode

IBM networks systems have a special translation called 'IBM LLC Encapsulation' which is used for translating IBM LLC based protocols between Token Ring and Ethernet Version 2.0 (DIXE) format. This translation does not apply when going between Token Ring a ...

ctTransIbmLlcSnaMode

IBM networks systems have a special translation called 'IBM LLC Encapsulation' which is used for translating IBM LLC based protocols between Token Ring and Ethernet Version 2.0 (DIXE) format. This translation does not apply when going between Token Ring a ...

ctTransIbmLlcNbMode

IBM networks systems have a special translation called 'IBM LLC Encapsulation' which is used for translating IBM LLC based protocols between Token Ring and Ethernet Version 2.0 (DIXE) format. This translation does not apply when going between Token Ring a ...

ctTransIbmLlcLnmMode

IBM networks systems have a special translation called 'IBM LLC Encapsulation' which is used for translating IBM LLC based protocols between Token Ring and Ethernet Version 2.0 (DIXE) format. This translation does not apply when going between Token Ring a ...

ctTransIbmLlcDscMode

IBM networks systems have a special translation called 'IBM LLC Encapsulation' which is used for translating IBM LLC based protocols between Token Ring and Ethernet Version 2.0 (DIXE) format. This translation does not apply when going between Token Ring a ...

ctTransIbmLlcOtherMode

IBM networks systems have a special translation called 'IBM LLC Encapsulation' which is used for translating IBM LLC based protocols between Token Ring and Ethernet Version 2.0 (DIXE) format. This translation does not apply when going between Token Ring a ...

ctTransIbmLlcOtherValue

This object allows the user to select an IBM LLC LSAP value not specified above. When ctTransIbmLlcOtherMode is enabled all frames outbound on this token ring port and providing a match between this value and the outbound packet's LSAP value and where the ...

ctTransSrTable

A table of entries describing the source route configuration managed objects.

ctTransSrEntry

A list of objects to allow the configuration of source route translation information.

ctTransSrPort

The MIB-II interface number for which this entry is administering source route configuration management.

ctTransSrIfMode

This object indicates the types of frames (sr,tp or both) supported by endstations attached to this interface. This information is used by the device to determine if sr/tp translation is required. Default is product specific. If tp (1) is selected the RIF ...

ctTransSrExpMode

This object selects the type of explorer frame the SR or SRT interface will use, if and when an explorer frame is required. This object is only applicable when ctTransSrIfMode is set to sr (2) or srt (3). The requirements will depend on the device being ...

ctTransSrIP

This object determines how the sr/tp translation of IP frames of type 'broadcast', 'destination unknown', or 'destination known but IP not previously seen for this end station' should be translated. This object is only applicable for SRT interfaces. If t ...

ctTransSrIPX

This object determines how the sr/tp translation of IPX frames of type `broadcast`, `destination unknown`, or `destination known but IPX not previously seen for this end station` should be translated. This object is only applicable for SRT interfaces. If ...

ctTransSrNetBIOS

This object determines how the sr/tp translation of NetBIOS frames of type `broadcast`, `destination unknown`, or `destination known but NetBIOS not previously seen for this end station` should be translated. This object is only applicable for SRT interf ...

ctTransSrSNA

This object determines how the sr/tp translation of SNA frames of type 'broadcast', 'destination unknown', or 'destination known but SNA not previously seen for this end station' should be translated. This object is only applicable for SRT interfaces. If ...

ctTransSrOther

This object determines how the sr/tp translation of all 'other protocols' is handled. 'other protocols' includes any protocol not mentioned above (i.e. IP,IPX,NetBIOS, or SNA) or any of those mentioned above with the 'not supported' option selected. This ...

ctTransSRLocalSegment

The segment (ring) number that uniquely identifies the segment to which this interface is connected. Current source routing protocols limit this value to the range: 0 through 4095. (The value 0 is used by some management applications for special test case ...

ctTransSrSRLF

The maximum size of the INFO field (LLC and above) that this interface can send/receive. It does not include any MAC level (framing) octets. The value of this object is used by this device to determine whether a modification of the LargestFrame (LF) fie ...

ctTransSRAutoRingNumberDetect

This object enables an interface to automatically detect the source route ring number of the attached ring segment. When enabled, the interface wil automatically each time at open, configure its ring number with the supplied ring number from the RPS, if p ...

ctTransNovellCfgTable

A list describing the enabled/disabled state of the Novell translation for each interface on this device.

ctTransNovellCfgEntry

A list of objects pertaining to the state of Novell translation for each interface.

ctTransNovellCfgPort

The MIB-II interface number of the port for which this entry is administering Novell configuration management.

ctTransNovellCfgMode

Enable this object indicates whether the device will reverse the bit ordering of addresses in the Novell header on Novell packets. Enable Type 2 indicates the device will reverse the bit ordering of addresses for token ring to fddi and no translation for ...

ctTransNovellGroupMode

This object allows the conversion of group and multicast addresses in the MAC DA of the IPX protocol format. Conversion is as follows: TR(C0 00 00 80 00 00) and Canonical (FF FF FF FF FF FF). TR(C0 00 40 00 00 00) and Canonical (09 00 07 FF FF FF). This o ...

ctTransIPCfgTable

A list describing the enabled/disabled state of the IP translation for each interface on this device.

ctTransIPCfgEntry

A list of objects pertaining to the state of IP translation for each interface.

ctTransIPCfgPort

The MIB-II interface number of the port for which this entry is administering IP configuration management.

ctTransIPDataCfgMode

This object indicates whether the device will reverse the bit ordering of addresses in the information field of IP data packets received and then transmitted on this interface. The default of this object is enabled.

ctTransIPArpCfgMode

This object indicates whether the device will reverse the bit ordering of addresses in the information field of ARP packets received and then transmitted on this interface. The default of this object is enabled.

ctTransIPRarpCfgMode

This object indicates whether the device will reverse the bit ordering of addresses in the information field of RARP packets received and then transmitted on this interface. The default of this object is enabled.

ctTransA2CfgTable

A list describing the enabled/disabled state of the Appletalk2 translation for each interface on this device.

ctTransA2CfgEntry

A list of objects pertaining to the state of Appletalk2 translation for each interface.

ctTransA2CfgPort

The MIB-II interface number of the port for which this entry is administering Appletalk2 configuration management.

ctTransA2DataCfgMode

This object indicates whether the device will reverse the bit ordering of addresses in the information field of Appletalk2 data packets received and then transmitted on this interface. The default of this object is enabled.

ctTransA2ArpCfgMode

This object indicates whether the device will reverse the bit ordering of addresses in the information field of ARP packets received and then transmitted on this interface. The default of this object is enabled.

ctTransA2McastCfgMode

This object indicates whether the device will reverse the bit ordering of addresses in the information field of broadcast/multicast packets received and then transmitted on this interface. The default of this object is enabled.

ctTransOtherTable

A list describing processing control for subgroups of LLC frames by SAP or SNAP type. This table allows the user to single out selected frame type groups for special handling by the processor (purely intended as a future upgrade path to add protocols that ...

ctTransOtherEntry

A list of objects pertaining to the processing of subgroups of LLC frames by SAP or SNAP type.

ctTransOtherPort

The MIB-II interface number of the port for which this entry is administering control for subgroups of LLC frames by SAP or SNAP type.

ctTransOtherUnknownSap

This object indicates whether any frames with an unrecognized SAP will require special translation handling by the processor. A recognized SAP will be specified by the user in one of the previous configuration groups. The default of this object is product ...

ctTransOtherUnknownSnap

This object indicates whether frames with an unrecognized SNAP will require special translation handling by the processor. A recognized SNAP will be specified by the user in one of the previous configuration groups. The default of this object is product s ...

ctTransOtherSapDsap1Mode

This object enables(1) or disables (2) the special translation handling of a SAP frame with a DSAP equal to ctTransOtherSapDsap1Val. The default of this object is product specific.

ctTransOtherSapDsap1Val

This object allows the user to specify a DSAP value that when matched will require additional translation on frames.

ctTransOtherSapDsap2Mode

This object enables(1) or disables (2) the special translation handling of a SAP frame with a DSAP equal to ctTransOtherSapDsap2Val. The default of this object is product specific.

ctTransOtherSapDsap2Val

This object allows the user to specify a DSAP value that when matched will require additional translation on frames.

ctTransOtherSapDsap3Mode

This object enables(1) or disables (2) the special translation handling of a SAP frame with a DSAP equal to ctTransOtherSapDsap3Val. The default of this object is product specific.

ctTransOtherSapDsap3Val

This object allows the user to specify a DSAP value that when matched will require additional translation on frames.

ctTransOtherSnap1Mode

When enabled (1) this object the value in ctTransOtherSnap1Val will be compared against the protocol values of all SNAP frames received on this interface. A match indicates that the current frame requires special translation handling. The default of this ...

ctTransOtherSnap1Val

This object allows the user to specify a SNAP value to match against inbound SNAP frames for translation handling.

ctTransOtherSnap2Mode

When enabled (1) this object the value in ctTransOtherSnap2Val will be compared against the protocol values of all SNAP frames received on this interface. A match indicates that the current frame requires special translation handling. The default of this ...

ctTransOtherSnap2Val

This object allows the user to specify a SNAP value to match against inbound SNAP frames for translation handling.

ctTransLfpsTable

This table is for the user to configure the large frame ports ability to support large frames. The Large frame port support is done on a per port basis. The operation affects outbound frames only.

ctTransLfpsEntry

A list of objects that pertain to the large frame port support table.

ctTransLfpsPort

The MIB-II interface number of the port for which this entry is administering control for subgroups of LLC frames by SAP or SNAP type.

ctTransLfpsAdminStatus

When large(1) is the setting all large frames are permissable out that port. fragment_if_possible(2) is used when the outport wants ip frames fragmented before transmission. All other non fragmentable large frames will be transmitted large. small(3) requi ...

ctTransLfpsOperationalStatus

This value represents the current operational mode of the interface. The operational mode should reflect what is set in the ctTransLfpsAdminStatus object. The only exception is when the user sellects a platform mode that is unsupported and if the ctTransL ...