enterasys-R2Management Download
The Enterasys Networks Proprietary MIB module for entities
implementing objects specific to the RoamAbout R2 Wireless
Access Platform.
With the IPHost SNMP tool, you can monitor any SNMP objects of the
enterasys-R2Management
. You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables,
their current values and descriptions taken from the
enterasys-R2Management
.
OID list for enterasys-R2Management
- etsysR2MgmtMemorySize
- The size of the memory in the Access Point in Mbytes.
- etsysR2MgmtWEBInterface
- Determines whether or not WEB Management is enabled or disabled.
- etsysR2MgmtTelnetInterface
- Determines whether or not Telnet Management is enabled or disabled.
- etsysR2MgmtVlan
- When non-zero this object specifies the management VLAN. This is the VLAN that remote management entities must use to communicate with this switch. Zero is a special value that specifies the default behavior, e.g., management on VLAN 1.
- etsysR2MgmtPowerups
- PERSISTENT: The number of times this device was powered on. Power Ups, Management Resets and Unsolicited Resets are all mutually exclusive.
- etsysR2MgmtResets
- PERSISTENT: Number of times the device was initialized with a management command. Power Ups, Management Resets and Unsolicited Resets are all mutually exclusive.
- etsysR2MgmtUnsolicitedResets
- PERSISTENT: Number of times the device initialized itself after encountering a fatal error. Power Ups, Management Resets & Unsolicited Resets are all mutually exclusive.
- etsysR2MgmtErrLogNumEntries
- PERSISTENT: The number of entries in the etsysR2MgmtErrLogTable. The value of this object is initially zero. It is incremented as etsysR2MgmtErrLogEntries are added, to a maximum value. The maximum value is implementation specific.
- etsysR2MgmtErrLogTable
- A table which describes errors encountered by the system.
- etsysR2MgmtErrLogEntry
- A list of errors logged by the system.
- etsysR2MgmtErrLogIndex
- PERSISTENT: The value of this object uniquely identifies an entry in the etsysR2MgmtErrLogTable.
- etsysR2MgmtErrLogTimeStamp
- PERSISTENT: The value of sysUpTime at the time in which the error is logged.
- etsysR2MgmtErrLogResetNumber
- PERSISTENT: The number of resets which have occurred at the time in which the error is logged. (This is the sum of etsysR2MgmtPowerups, etsysR2MgmtMgmtResets, and etsysR2MgmtUnsolicitedResets.)
- etsysR2MgmtErrLogInfo
- PERSISTENT: A textual description of the error being logged.
- etsysR2MgmtCrashUploadUseBootp
- DURABLE: Controls where the AccessPoint gets the information that it needs to upload crash dumps. When true(1), indicates that the AP should use the BootP protocol to auto-configure parameters such as its own IP address, gateway IP, subnet, TFTP server IP ...
- etsysR2MgmtCrashUploadServerIP
- DURABLE: The IP address of the TFTP server that should be used for crash dump uploads. This value will be ignored when 'etsysR2MgmtCrashUploadUseBootp' is 'false(2)'.
- etsysR2MgmtCrashUploadDirectory
- DURABLE: The name of the remote directory to which all crash dumps should be uploaded. This value will be ignored when 'etsysR2MgmtCrashUploadUseBootp' is 'false(2)'.
- etsysR2MgmtUplineDumpMode
- Determines whether or not a dump file is created on an Access Point crash.
- etsysR2MgmtBaseGroup
- The basic etsysR2Mgmt objects.
- etsysR2MgmtCountersGroup
- The Counters objects.
- etsysR2MgmtErrLogGroup
- The error logging objects.
- etsysR2MgmtLoaderGroup
- The Crash Upload objects.
- etsysR2MgmtBaseGroupV2
- The basic etsysR2Mgmt objects.
