enterasys-ietf-bridge-mib-ext-mib Download

etsysIetfBridgeDot1dStpPortTable

Extensions to the table that contains port-specific information for the Spanning Tree Protocol.

etsysIetfBridgeDot1dStpPortEntry

A list of extensions to the information maintained by every port about the Spanning Tree Protocol state for that port.

etsysIetfBridgeDot1dStpPortStpEnable

The enabled/disabled status of the Spanning Tree protocol on the port.

etsysIetfBridgeDot1dStpPortSpanGuardBlocking

The state of the port with respect to the SpanGuard feature. true(1) - this port is being held in the blocking state by the SpanGuard feature. false(2) - this port is not being held in the blocking state by the SpanGuard feature. When this object has a ...

etsysIetfBridgeDot1dStpPortCistRoleValue

Indicates this port's role on the CIST. disabled -- this port has no role on the CIST. root -- this port has the role of root port on the CIST. designated -- this port has the role of designated port on the CIST. alternate -- this port has the ro ...

etsysIetfBridgeDot1dStpPortCistNonForwardingReason

Indicates the reason why this port has been placed in a non-forwarding state on the CIST (other than as a result of normal Spanning Tree protocol operation). none(1) - the port has not been placed in a non-forwarding state due to any exceptional condition ...

etsysIetfBridgeDot1dStpTopChangeTrapEnable

The enabled/disabled status of the Spanning Tree topology change notification. When this object is set to enabled(1) topology change notifications SHOULD be generated by the agent. When this object is set to disabled(2) topology change notifications MUST ...

etsysIetfBridgeDot1dStpNewRootTrapEnable

The enabled/disabled status of the Spanning Tree new root notification. When this object is set to enabled(1) new root notifications SHOULD be generated by the agent. When this object is set to disabled(2) new root notifications MUST NOT be generated by t ...

etsysIetfBridgeDot1dStpBridgePriorityDefault

The version of the Spanning Tree default Bridge Priority that is to be used by this Bridge. stp8021d1998(1) - indicates the use of Bridge Priority as defined in IEEE Std. 802.1D-1998. stp8021t2001(2) - indicates the use of Bridge Priority as defined in IE ...

etsysIetfBridgeDot1dStpSpanGuardEnable

The enabled/disabled status of the SpanGuard functionality.

etsysIetfBridgeDot1dStpSpanGuardTrapEnable

The enabled/disabled status of the SpanGuard Port Blocking trap.

etsysIetfBridgeDot1dStpSpanGuardBlockTime

The number of seconds that a port will be held in the blocking state by the SpanGuard feature. The value zero indicates that ports will be held in the blocking state until the entity is reset. Ports that are being held in the blocking state can be retur ...

etsysIetfBridgeDot1dStpBackupRootEnable

The enabled/disabled status of the Backup Root functionality on the Common and Internal Spanning Tree.

etsysIetfBridgeDot1dStpBackupRootTrapEnable

The enabled/disabled status of the Backup Root activation trap.

etsysIetfBridgeDot1dStpLoopProtectPortTable

A table of port based information for the Loop Protect feature.

etsysIetfBridgeDot1dStpLoopProtectPortEntry

The per port information for the Loop Protect feature.

etsysIetfBridgeDot1dStpLoopProtectPortCistEnable

The enabled/disabled status of the Loop Protect feature for this port on the Common and Internal Spanning Tree (CIST).

etsysIetfBridgeDot1dStpLoopProtectPortCistBlocking

The state of the port on the CIST with respect to the Loop Protect feature. true(1) - this port is being held in the blocking state by the Loop Protect feature. false(2) - this port is not being held in the blocking state by the Loop Protect feature. W ...

etsysIetfBridgeDot1dStpLoopProtectPortPartnerCapable

The capability of the port's link partner with respect to the Loop Protect feature. true(1) - the partner supports the Loop Protect feature. false(2) - the partner does not support the Loop Protect feature. When this object has a value of true(1) the f ...

etsysIetfBridgeDot1dStpLoopProtectEventThreshold

The number of Loop Protect events that must occur on a given port on a given Spanning Tree instance within the interval defined by etsysIetfBridgeDot1dLoopProtectEventWindow for the port to become locked (i.e., held indefinitely in the blocking state). I ...

etsysIetfBridgeDot1dStpLoopProtectEventWindow

This time value, measured in units of seconds, specifies the length of the interval during which Loop Protect events are counted for a given port on a given Spanning Tree instance.

etsysIetfBridgeDot1dStpLoopProtectEventTrapEnable

The enabled/disabled status of Loop Protect event notification.

etsysIetfBridgeDot1dBasePortTable

A table of port based controls. Augments the dot1dBasePortTable.

etsysIetfBridgeDot1dBasePortEntry

The per port controls for an individual bridge port.

etsysIetfBridgeDot1dBasePortNewLearnedAddrTrap

The status of the new learned address notification feature on this port. When etsysIetfBridgeDot1qNewLearnedAddrTrapEnable and this object are both set to enabled the agent will generate an etsysIetfBridgeDot1qFdbNewLearnedAddr notification for each new e ...

etsysIetfBridgeDot1dBasePortMovedAddrTrap

The status of the moved address notification feature on this port. When etsysIetfBridgeDot1qMovedAddrTrapEnable and this object are both set to enabled the agent will generate an etsysIetfBridgeDot1qFdbMovedAddr notification for each entry in the dot1qTpF ...

etsysIetfBridgeDot1qNewLearnedAddrTrapEnable

The global status of the new learned address notification feature. When this object is set to enabled(1), the agent will generate etsysIetfBridgeDot1qFdbNewLearnedAddr notifications for each new address learned on ports that have their corresponding etsys ...

etsysIetfBridgeDot1qMovedAddrTrapEnable

The global status of the moved address notification feature. When this object is set to enabled(1), the agent will generate etsysIetfBridgeDot1qFdbMovedAddr notifications for each moved address on ports that have their corresponding etsysIetfBridgeDot1dBa ...

etsysIetfBridgeDot1qStaticUcastAsMcast

When this object is set to enabled(1), the agent will allow unicast traffic which matches all 48 bits of a static and the source VLAN of a multicast entry in the filter-database, except for the multicast-bit (bit 8). This augments the behavior defined in ...

etsysIetfBridgeStpPort

A collection of objects relating to per Port Spanning Tree information.

etsysIetfBridgeStpTrap

A collection of objects relating to Spanning Tree SNMP Trap control.

etsysIetfBridgeBase

A collection of objects relating to bridge configuration information.

etsysIetfBridgeDot1dStpBridgePriority

An object for support of legacy bridge priorities.

etsysIetfBridgeSpanGuard

A collection of objects relating to the SpanGuard feature.

etsysIetfBridgeBackupRoot

A collection of objects relating to the BackupRoot feature.

etsysIetfBridgePortCistRoleValue

The role of the port with respect to the CIST.

etsysIetfBridgeMovedAddr

A collection of objects relating to enabling moved address notifications.

etsysIetfBridgeLoopProtect

A collection of objects relating to the Loop Protect feature.

etsysIetfBridgeStpCistNonForwardingReason

An object that indicates the reason for an exceptional non-forwarding condition per port on the CIST.

etsysIetfBridgeStaticUcastAsMcast

A collection of objects pertaining to the transmission of unicast packets received by the device.