hpclj4500 Download

energy-star

Returns or changes the Energy Star sleep value. If the value is greater than zero, then the device will go into energy saving sleep mode after the print engine has been idle for the number of seconds specified by this object. A value of zero means Energy ...

sleep-mode

Returns eTrue if the device is in energy saving sleep mode, otherwise returns eFalse. Setting SLEEP-MODE to eFalse causes the device to wake up, if it is in sleep mode. Setting SLEEP-MODE to eTrue causes the device to go into sleep mode. Additional info ...

on-off-line

To bring the PDL processing sub-system on or off line. If the device is a printer, then the printer does not process print job data when the printer is off line. PML communication persists. Additional information: When the printer is in the Offline state, ...

continue

A device can support a class of errors called continuable errors. When a continuable error is encountered, the device requires a continue event to occur before the device will continue operation. One continue event is setting the CONTINUE object to eIni ...

auto-continue

Indicates if the device will automatically continue after encountering a continuable error. If AUTO- CONTINUE is set to eOn, the device will automatically generate continue event to acknowledge continuable errors. If AUTO-CONTINUE is set to eOff, then s ...

job-input-auto-continue-timeout

The number of seconds the device waits after a job related continuable error occurs before automatically continuing. An example job related continuable error is the job requesting a media size that is not available. After the timeout expires, the device ...

job-input-auto-continue-mode

Returns or sets the device behavior when the desired media is not currently available. cCancelJob - The device cancels the job. The device POS should explain what happens if this item is not the only item in the collection. cAutoMediaSizeOverride - The d ...

background-status-msg-line1-part1

The string displayed on the device's front panel in place of the printer's built-in background status string. An example built-in background status string is '00 READY'. Additional information: The display size for LaserJet 4500 is 2 lines by 16 characte ...

background-status-msg-line2-part1

The string displayed on the device's front panel in place of the printer's built-in background status string. An example built-in background status string is '00 READY'. Additional information: See BACKGROUND-STATUS-MSG-LINE1-PART1

error-log-clear

Setting this object clears all the entries in the error log sub-tree.

job-output-auto-continue-timeout

Returns or sets the time that the printer will wait after an output bin becomes full and the printer is trying to deliver a sheet of media to that output bin. When the timeout expires, the job is processed according to the OUTBINn-OVERRIDE-MODE. A value ...

localization-languages-supported

The list of languages supported by the device. The languages are primarily, but not limited to, two character codes from ISO 639, each separated by a comma character. Additional information: This string will always be in the Roman-8 character set. See pr ...

localization-countries-supported

The list of countries supported by the device. The countries are primarily, but not limited to, two character codes from ISO 3166, each separated by a comma character. Additional information: This string will always be in the Roman-8 character set. See p ...

model-number

Identifies the device model number as listed in the HP corporate price list (e.g. C2121A for DeskJet 500C). The string is as specific as possible. Products should note in POS if the model number on the CPL changes but the device reports the previous mod ...

model-name

Identifies the device model name (e.g. ''DeskJet 1200C''). The string is as specific as possible. Capitalization and spacing should match family naming conventions. Products should note in POS if the model name on the HP corporate price list changes bu ...

serial-number

Identifies the serial number for the device. If the SERIAL-NUMBER object is set by the user, then setting the object does not need to be protected. If the SERIAL-NUMBER object is set at the factory, then the SERVICE-PASSWORD object must be set correctly ...

device-name

User defined device name. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as possible and will return the . Additional information: The maximum supported string ...

device-location

User defined device location. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as possible and will return the . Additional information: The maximum supported str ...

asset-number

User defined asset number. The POS should indicate the maximum supported string length. If the user entered string is too long, the device will store as much as possible and will return the . Additional information: The maximum supported string ...

simm1-type

Returns an indication of the type of option installed in SIMM slot 1. eEmpty means the device did not detect any option installed in the interface slot. eUnknown means the device doesn't recognize the installed option. eUnSupported means the device recogn ...

simm1-capacity

Returns an indication of the capacity of the SIMM installed in SIMM slot 1. The capacity is dependent on the type of option, as indicated by the SIMM1-TYPE object. This object has no meaning if the installed option type is eUnknown or eReadOnlyMemory. ...

simm2-type

Returns an indication of the type of option installed in SIMM slot 2. See SIMM1-TYPE for a description.

simm2-capacity

Returns an indication of the capacity of the SIMM installed in SIMM slot 2. See SIMM1-CAPACITY for a description. Additional information: See SIMM1-CAPACITY

simm3-type

Returns an indication of the type of option installed in SIMM slot 3. See SIMM1-TYPE for a description.

simm3-capacity

Returns an indication of the capacity of the SIMM installed in SIMM slot 3. See SIMM1-CAPACITY for a description. Additional information: See SIMM1-CAPACITY

mio1-model-name

Returns product information identifying the I/O card. Example: XXXX

mio1-manufacturing-info

Returns information describing the manufacture of the I/O card installed in MIO/EIO slot 1. May include serial number and firmware revision. Additional information: The format of the string returned is determined by the manufacturer of the device/card. T ...

mio1-type

Returns an indication of the type of option installed in MIO/EIO slot 1. See SIMM1-TYPE for an explanation of the enumerations. Additional information: This object identifies the type of device/card installed in the first slot of the EIO bus.

mio2-model-name

Returns product information identifying the I/O card. Example: XXXX

mio2-manufacturing-info

Returns information describing the manufacture of the I/O card installed in MIO/EIO slot 2. May include serial number and firmware revision. Additional information: The format of the string returned is determined by the manufacturer of the device/card. T ...

mio2-type

Returns an indication of the type of option installed in MIO/EIO slot 2. See SIMM1-TYPE for an explanation of the enumerations. Additional information: This object identifies the type of device/card installed in the second slot of the EIO bus.

self-test

Writing this object allows a device self test to be started. Reading this object provides an indication what self-test is currently executing, if any. Actual self-test operation is device specific. A self test may not be allowed at any arbitrary time. ...

print-internal-page

Writing this object to a value other than eNotPrintingAnInternalPage causes the device to attempt to print an internally generated page. Reading this object provides an indication what internally generated page is currently being printed, if any. The ac ...

clearable-warning

Returns or controls how the device will track clearable warnings. A clearable warning indicates a transient event in the device. The device will continue after the transient event occurs. If CLEARABLE-WARNING is eOff, the device does not track clearabl ...

cancel-job

Cancels the print job whose ID matches the value written to the CANCEL-JOB object. The host first learns the job ID using the CURRENT-JOB-PARSING-ID command. If the printer has completely processed the job, the printer responds with . If the ...

job-info-change-id

Returns the current value of an object in the job-info sub-tree whose value has changed. Define the object identifier for the object whose value has changed as job-info.required-field.optional-field.job-id. job-info represents the OID prefix of all obje ...

current-job-parsing-id

Contains the printer assigned job identification for the job currently being processed by the processing PDL sub- system. The job ID is a monotonically increasing number. The job ID may be reset to zero at power-up and may roll over to zero after reachi ...

job-info-name1

Contains the first part of this print job's name. The last OID field for this dynamic object contains the job ID. Additional information: The job name is the string specified by the NAME= parameter of the @PJL JOB command which allows a maximum of 80 cha ...

job-info-name2

Contains the second part of this print job's name. The last OID field for this dynamic object contains the job ID. Additional information: See job-info-name1.

job-info-stage

Indicates what printer sub-systems are currently processing this print job. The last OID field for this dynamic object contains the job ID. cSourceSubsystem - some of the job is in the printer I/O subsystem. cProcessingSubsystem - some of the job is in ...

job-info-io-source

Indicates which I/O source, the print job was received over. The value maps to port numbering scheme supported in the DEVICE/SOURCE-SUBSYSTEM/IO/PORTS sub-tree. Additional information: There will be between 0 and 16 instances of this object in the printe ...

job-info-pages-processed

Indicates the number of pages processed by the processing subsystem. If neither the cSourceSubsystem or the cProcessingSubsystem items are in the associated JOB-INFO-STAGE object, then this object contains the total number of pages processed for this job ...

job-info-pages-printed

Indicates the number of pages printed by the destination subsystem. If non of the cSourceSubsystem, cProcessingSubsystem or cDestinationSubsystem items are in the associated JOB-INFO-STAGE object, then this object contains the total number of pages print ...

job-info-size

Indicates the number of bytes of data processed by the processing subsystem. If neither of the cSourceSubsystem or cProcessingSubsystem items are in the associated JOB-INFO-STAGE object, then this object contains the size of this job, in bytes. The last ...

job-info-state

Indicates the state of the job. The last OID field for this dynamic object contains the job ID. eAborted - the print job was aborted. eWaitingForResources - the print job requires resources that are not currently available. Example resources that can ca ...

job-info-outcome

Indicates if any warning or error conditions were encountered while processing the assoicated job. The last OID field for this dynamic object contains the job ID. Additional information: In LaserJet 4500, warnings and errors are not recorded in this obje ...

job-info-outbins-used

Indicates which output bins this job has delivered printed pages to. The last OID field for this dynamic object contains the job ID. Additional information: Although LaserJet 4500 comes with two output bins -- a face-down bin on the top of the device and ...

job-info-physical-outbins-used

Indicates which physical output bins this job has delivered printed pages to. The last OID field for this dynamic object contains the job ID. Additional information: The output bins designated by the bits of this collection include only the physical bins ...

job-info-attr-1

Returns the value that was set in PJL via the SET JOBATTR= command. Attribute objects are saved sequentially, starting with 1, after the start of a job. If more attributes are set than there are objects to store them, the excess JOBATTR values are ignore ...

job-info-attr-2

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. Additional information: See job-info-attr-1

job-info-attr-3

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. Additional information: See job-info-attr-1

job-info-attr-4

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. Additional information: See job-info-attr-1

job-info-attr-5

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. Additional information: See job-info-attr-1

job-info-attr-6

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. Additional information: See job-info-attr-1

job-info-attr-7

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. Additional information: See job-info-attr-1

job-info-attr-8

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. Additional information: See job-info-attr-1

job-info-attr-9

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. Additional information: See job-info-attr-1

job-info-attr-10

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. Additional information: See job-info-attr-1

job-info-attr-11

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. Additional information: See job-info-attr-1

job-info-attr-12

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. Additional information: See job-info-attr-1

job-info-attr-13

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. Additional information: See job-info-attr-1

job-info-attr-14

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. Additional information: See job-info-attr-1

job-info-attr-15

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. Additional information: See job-info-attr-1

job-info-attr-16

Returns the value that was set in PJL via the SET JOBATTR= command. See JOB-INFO-ATTR-1 for details. Additional information: See job-info-attr-1

error1-time-stamp

Contains some sort of time stamp indicating when error 1 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. A ...

error1-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: Contains a device specific error code. A value of zero means 'no error ...

error2-time-stamp

Contains some sort of time stamp indicating when error 2 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. A ...

error2-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error3-time-stamp

Contains some sort of time stamp indicating when error 3 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. A ...

error3-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error4-time-stamp

Contains some sort of time stamp indicating when error 4 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. A ...

error4-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error5-time-stamp

Contains some sort of time stamp indicating when error 5 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. A ...

error5-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error6-time-stamp

Contains some sort of time stamp indicating when error 6 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. A ...

error6-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error7-time-stamp

Contains some sort of time stamp indicating when error 7 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. A ...

error7-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error8-time-stamp

Contains some sort of time stamp indicating when error 8 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. A ...

error8-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error9-time-stamp

Contains some sort of time stamp indicating when error 9 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. A ...

error9-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error10-time-stamp

Contains some sort of time stamp indicating when error 10 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error10-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error11-time-stamp

Contains some sort of time stamp indicating when error 11 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error11-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error12-time-stamp

Contains some sort of time stamp indicating when error 12 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error12-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error13-time-stamp

Contains some sort of time stamp indicating when error 13 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error13-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error14-time-stamp

Contains some sort of time stamp indicating when error 14 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error14-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error15-time-stamp

Contains some sort of time stamp indicating when error 15 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error15-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error16-time-stamp

Contains some sort of time stamp indicating when error 16 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error16-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error17-time-stamp

Contains some sort of time stamp indicating when error 17 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error17-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error18-time-stamp

Contains some sort of time stamp indicating when error 18 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error18-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error19-time-stamp

Contains some sort of time stamp indicating when error 19 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error19-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error20-time-stamp

Contains some sort of time stamp indicating when error 20 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error20-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error21-time-stamp

Contains some sort of time stamp indicating when error 21 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error21-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error22-time-stamp

Contains some sort of time stamp indicating when error 22 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error22-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error23-time-stamp

Contains some sort of time stamp indicating when error 23 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error23-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error24-time-stamp

Contains some sort of time stamp indicating when error 24 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error24-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error25-time-stamp

Contains some sort of time stamp indicating when error 25 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error25-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error26-time-stamp

Contains some sort of time stamp indicating when error 26 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error26-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error27-time-stamp

Contains some sort of time stamp indicating when error 27 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error27-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error28-time-stamp

Contains some sort of time stamp indicating when error 28 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error28-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error29-time-stamp

Contains some sort of time stamp indicating when error 29 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error29-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error30-time-stamp

Contains some sort of time stamp indicating when error 30 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error30-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error31-time-stamp

Contains some sort of time stamp indicating when error 31 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error31-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error32-time-stamp

Contains some sort of time stamp indicating when error 32 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error32-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error33-time-stamp

Contains some sort of time stamp indicating when error 33 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error33-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error34-time-stamp

Contains some sort of time stamp indicating when error 34 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error34-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error35-time-stamp

Contains some sort of time stamp indicating when error 35 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error35-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error36-time-stamp

Contains some sort of time stamp indicating when error 36 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error36-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error37-time-stamp

Contains some sort of time stamp indicating when error 37 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error37-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error38-time-stamp

Contains some sort of time stamp indicating when error 38 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error38-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error39-time-stamp

Contains some sort of time stamp indicating when error 39 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error39-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error40-time-stamp

Contains some sort of time stamp indicating when error 40 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error40-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error41-time-stamp

Contains some sort of time stamp indicating when error 41 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error41-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error42-time-stamp

Contains some sort of time stamp indicating when error 42 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error42-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error43-time-stamp

Contains some sort of time stamp indicating when error 43 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error43-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error44-time-stamp

Contains some sort of time stamp indicating when error 44 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error44-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error45-time-stamp

Contains some sort of time stamp indicating when error 45 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error45-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error46-time-stamp

Contains some sort of time stamp indicating when error 46 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error46-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error47-time-stamp

Contains some sort of time stamp indicating when error 47 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error47-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error48-time-stamp

Contains some sort of time stamp indicating when error 48 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error48-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error49-time-stamp

Contains some sort of time stamp indicating when error 49 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error49-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

error50-time-stamp

Contains some sort of time stamp indicating when error 50 occurred. Example time stamps include the actual time the error occurred (in seconds since Jan. 1, 1970), and the total engine page count. The device POS documents the meaning of the time stamp. ...

error50-code

Contains a device specific error code. Each device POS should list what errors are logged to the error log and the meaning of each supported error code value. Additional information: See ERROR1-CODE

io-timeout

The amount of time, in seconds, to wait for more print job data to be received before an I/O timeout occurs. The I/O channel being timed is the I/O channel that received the data associated with the current print job. If an I/O timeout occurs, the PDL pro ...

io-switch

Indicates if the device will switch between I/O channels when a job boundary is encountered and print job data is available on another I/O channel.

io-buffering

Returns or controls the manner in which the device performs I/O data buffering. I/O data buffering allows additional print job data to be buffered by the I/O sub- system in an effort to allow the computer sending the data to perform other tasks and to ke ...

io-buffer-size

Returns or configures the amount of memory, in bytes, dedicated to I/O print job data buffering. Attempting to set to an unsupported value causes the device to use the closest supported value. Each device POS should document the list of supported values ...

maximum-io-buffering-memory

This object's name is misleading. Returns the maximum amount of additional memory, in bytes, that can be dedicated to buffering print job data. Additional information: This object returns the maximum value for IO-BUFFER-SIZE as stated in the General Use ...

port1-parallel-speed

Returns or changes the maximum parallel I/O port speed, for port 1. This object is only supported if this port is a parallel port. An eSlow setting causes a 10 us busy pulse per received byte of data. An eFast setting causes a 1.5 us busy pulse per rec ...

port1-parallel-bidirectionality

Returns or changes whether the parallel I/O port supports bidirectional communication for port 1. This object is only supported if this port is a parallel port. Additional information: A get on this object returns the current mode for the parallel port. ...

default-copies

Returns or changes default copies. Default copies is the default values used by the PDL to control the number of copies of each page in the print job that are printed. The print job can override this value. The list of supported values should be docume ...

form-feed

Instructs the PDL processing sub-system to finishing processing the current page of the current job. Form feed is also known as close page or eject page. If the PDL processing sub-system is in a FORM-FEED-NEEDED state, this causes the device to flush or ...

resource-saving

Returns or changes PDL resource saving. Resource saving stores a PDL's permanent soft resources, like fonts, even when another PDL is active. Resource saving is also called environment saving. When eOff, resource saving is disabled. When ON, resource ...

default-vertical-black-resolution

Returns or changes the value of the default vertical black resolution. The units are dots per inch. Additional information: The value of this object is fixed since LaserJet 4500 only supports 600 dpi resolution.

default-horizontal-black-resolution

Returns or changes the value of the default horizontal black resolution. The units are dots per inch. Additional information: The value of this object is fixed since LaserJet 4500 only supports 600 dpi resolution.

default-page-protect

Returns or changes the default page protection behavior. If eOff, the device does not reserve memory for holding the entire raster form of a processed page. If eOn, then memory is reserved. If eAuto, the device determines the amount of memory to reserve ...

default-lines-per-page

Returns or changes the default number of lines per page. The POS indicates the supported values. An unsupported value causes the printer to use the closest supported value, causing the printer to return the . Additional information: This object ...

default-vmi

Returns or changes the default vertical motion index. The unit of measure for VMI is centipoints per line. The POS indicates the supported values. An unsupported value causes the printer to use the closest supported value, causing the printer to return < ...

default-media-size

This indicates the default media size. A write of an unsupported value causes an . Complete list of supported media sizes along with their dimensions are listed in the ''Media Size Table'' near the end of this document. Additional information: ...

cold-reset-media-size

Returns or sets the media size that is used as the DEFAULT-MEDIA-SIZE when a cold reset occurs. Additional information: The NOT-IDLE object mentioned in the general description is not implemented in LaserJet 4500. This object can be set when the printer i ...

default-media-name

Returns or sets the media name that is used until the media name is changed by a print job command. Additional information: This string must be the same as one of the MEDIAn-NAME objects. This object is not localized.

reprint

Returns or changes the reprint (jam recovery) setting. If eOn, then the device will reprint pages jammed pages. If eOff, the device will not attempt to reprint jammed pages. If eAuto, a device dependent algorithm (which should be documented in the POS) w ...

default-bits-per-pixel

Controls the number of levels used (per pixel) when printing grayscale or color images. Additional information: This value is constant since LaserJet 4500 always expects eight bits of data per pixel in each plane.

form-feed-needed

Indicates if the PDL processing sub-system has made marks on the current page and the source subsystem has been idle for a device specific amount of time. Additional information: LaserJet 4500 will set this object to eTrue when a personality has made mark ...

pcl-default-font-height

Returns or changes the default PCL height. Height is an approximate measure of the body of the type in centipoints. A centipoint is 1/7200 inch. Height applies only to proportional fonts. Point size, in points, can be converted to font height, in cent ...

pcl-default-font-source

Returns or changes the value of the default font source variable in NVRAM. Additional information: This object can be set when the printer is not idle, and will return if successful, but the change will not affect the current job since the print ...

pcl-default-font-number

Returns or changes the value of the default font number variable in NVRAM. Writing an unsupported value causes the printer to generate an . Additional information: Valid numbers or 0 - 255, but only font numbers that are included in the PCL FON ...

pcl-default-font-width

Returns or changes the default PCL font width. Width is expressed as the width of a character in centipoints. A centipoint is 1/7200 inch. Width applies only to fixed space fonts. Pitch, in character per inch, can be converted to font width, in centip ...

postscript-print-errors

Returns or changes the value of the print PostScript errors setting. If eOn, PostScript prints an error page showing the error encountered and the stack at the time of the error. Additional information: This object can be set when the printer is not idle ...

pjl-password

Returns PJL password, if the password is not set (zero). If the password is set, then attempting to retrieve the password causes an to occur and will return the .

jetsend-mode

Enables or disables the JetSend processing sub-system. Additional information: Enables or disables the JetSend processing subsystem. The valid values are eOff and eOn. (Specifying an invalid mode causes an error to be returned.)

jetsend-contact-password

A C structure containing the following fields: typedef struct { ubyte old_password[8]; ubyte new_password[8];/ } jetsend_change_contact_password_t; where ubyte is an unsigned byte (0-255). Additional information: Controls access to the JetSend processing ...

jetsend-contact-ip-address-security

A C structure containing the following fields: typedef struct { ubyte reserved[3]; ubyte command; /* command: 0 to 1 */ ubyte password[8]; ubyte IPAddress[4]; } jetsend_contact_ip_address_security_t; where ubyte is an unsigned byte (0-255). The defined v ...

total-color-page-count

Total number of color pages printed by the device. Additional information: Any page with one or more color pixels is counted as a color page. Pages that only contain black marks are not counted by this object. The valid range of this object is 0 to 2^24- ...

duplex-page-count

Total number of sheets of media that have been duplex printed. A sheet is counted if it travels through the duplex page path, regardless of whether or not marks are made on the page. The POS will indicate if the value is kept in NVRAM.

mp-tray

Returns or changes the value of the multi-purpose (MP) tray configuration variable. The MP tray can be configured to operate as an additional input tray (eCassette), a manual feed slot (eManual), or in a manner compatible with the LaserJet III manual fee ...

tray1-media-size-loaded

Returns the media size that is currently configuredconfigured in tray #1. This object can be set to indicate the media size currently loaded, if the printer supports input trays that can not sense the media size. Complete list of supported media sizes a ...

tray2-media-size-loaded

Returns the media size that is currently configured in tray #2. Complete list of supported media sizes along with their dimensions are listed in the ''Media Size Table'' near the end of this document. Additional information: The Media Size Table does not ...

tray3-media-size-loaded

Returns the media size that is currently configured in tray #3. Complete list of supported media sizes along with their dimensions are listed in the ''Media Size Table'' near the end of this document. Additional information: The Media Size Table does not ...

overflow-bin

Returns or sets the bin that will be used for additional sheets of media when the current bin is full and printing is allowed to continue. Additional information: This object returns a constant value of zero signifying that this feature is not supported i ...

low-marking-agent-processing

Returns or changes how the device processes a low marking agent event. If eCont, then the device continues to print. If eStop, then the device stops until a continue event occurs.

default-ret

Returns or changes the Resolution Enhancement Technology setting. Devices that only support eOff and on should map all other values to on and always return the same non-eOff value to indicate on. The list of supported values should be documented in the ...

default-print-quality

Returns or sets the default print quality. A value of zero has the lowest print quality. A value of 100 has the highest print quality. Each POS should document what values in the 0 to 100 range are supported. Additional information: This feature is not ...

media-names-available

The value of this object controls which of the MEDIAx- NAME objects are supported. If a bit is set to zero, then attempting to get or set the corresponding MEDIAx- NAME objects will return .

media1-name

Media 1 name. Additional information: The symbol set for this string is Roman-8.

media1-short-name

Length restricted version of the media name 1. The length restriction is required to allow the media name to be displayed on the device's control panel. The device POS must state the maximum number of characters allowed. If the device also has a limita ...

media1-page-count

Number of sheets of media 1 that have been printed. The device POS should state whether this value is lost across a power cycle or kept in NVRAM. Additional information: The page count is incremented when a sheet of media is pulled from an input tray. A ...

media2-name

Media 2 name. Additional information: See MEDIA1-NAME.

media2-short-name

Length restricted version of the media name 2. See MEDIA1-SHORT-NAME for details.

media2-page-count

Number of sheets of media 2 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media3-name

Media 3 name. Additional information: See MEDIA1-NAME.

media3-short-name

Length restricted version of the media name 3. See MEDIA1-SHORT-NAME for details.

media3-page-count

Number of sheets of media 3 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media4-name

Media 4 name. Additional information: See MEDIA1-NAME.

media4-short-name

Length restricted version of the media name 4. See MEDIA1-SHORT-NAME for details.

media4-page-count

Number of sheets of media 4 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media5-name

Media 5 name. Additional information: See MEDIA1-NAME.

media5-short-name

Length restricted version of the media name 5. See MEDIA1-SHORT-NAME for details.

media5-page-count

Number of sheets of media 5 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media6-name

Media 6 name. Additional information: See MEDIA1-NAME.

media6-short-name

Length restricted version of the media name 6. See MEDIA1-SHORT-NAME for details.

media6-page-count

Number of sheets of media 6 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media7-name

Media 7 name. Additional information: See MEDIA1-NAME.

media7-short-name

Length restricted version of the media name 7. See MEDIA1-SHORT-NAME for details.

media7-page-count

Number of sheets of media 7 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media8-name

Media 8 name. Additional information: See MEDIA1-NAME.

media8-short-name

Length restricted version of the media name 8. See MEDIA1-SHORT-NAME for details.

media8-page-count

Number of sheets of media 8 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media9-name

Media 9 name. Additional information: See MEDIA1-NAME.

media9-short-name

Length restricted version of the media name 9. See MEDIA1-SHORT-NAME for details.

media9-page-count

Number of sheets of media 9 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media10-name

Media 10 name. Additional information: See MEDIA1-NAME.

media10-short-name

Length restricted version of the media name 10. See MEDIA1-SHORT-NAME for details.

media10-page-count

Number of sheets of media 10 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media11-name

Media 11 name. Additional information: See MEDIA1-NAME.

media11-short-name

Length restricted version of the media name 11. See MEDIA1-SHORT-NAME for details.

media11-page-count

Number of sheets of media 11 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

media12-name

Media 12 name. Additional information: See MEDIA1-NAME.

media12-short-name

Length restricted version of the media name 12. See MEDIA1-SHORT-NAME for details.

media12-page-count

Number of sheets of media 12 that have been printed. See MEDIA1-PAGE-COUNT for details. Additional information: See MEDIA1-PAGE-COUNT.

engine-media-mode1-page-count

The number of sheets printed using this media mode. The device POS should state whether this value is lost across a power cycle or is kept in permanent storage. Additional information: The value of this object is persistent across a power cycle. Engine m ...

engine-media-mode2-page-count

The number of sheets printed using this media mode. The device POS should state whether this value is lost across a power cycle or is kept in permanent storage. Additional information: The value of this object is persistent across a power cycle. Engine m ...

engine-media-mode3-page-count

The number of sheets printed using this media mode. The device POS should state whether this value is lost across a power cycle or is kept in permanent storage. Additional information: The value of this object is persistent across a power cycle. Engine m ...

engine-media-mode4-page-count

The number of sheets printed using this media mode. The device POS should state whether this value is lost across a power cycle or is kept in permanent storage. Additional information: The value of this object is persistent across a power cycle. Engine m ...

engine-media-mode5-page-count

The number of sheets printed using this media mode. The device POS should state whether this value is lost across a power cycle or is kept in permanent storage. Additional information: The value of this object is persistent across a power cycle. Engine m ...

media-size-count

The number of impressions printed on sheets of this media size. The device POS should state whether this value is lost across a power cycle or is kept in permanent storage. Additional information: The value of this object is persistent across a power cyc ...

channel-bytes-sent

The low order 31 bits of the number of bytes sent from the printer to the host on this logical channel.

channel-bytes-received

The low order 31 bits of the number of bytes received by the printer from the host on this logical channel.

channel-io-errors

The low order 31 bits of the number of I/O errors which have occured on this logical channel.

channel-jobs-received

The low order 31 bits of the number of print jobs which have been received on this logical channel.

channel-mio

The number of the MIO card associated with this logical channel. If this logical channel is not associated with an MIO card a zero is returned. The value returned for each logical channel is the MIO card's physical slot number. The list of supported ...

hrmemorysize

The amount of physical main memory contained by the host. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: The unit of measure for this object is 1024 bytes. The default value assumes the base printer with no additional mem ...

hrstorageindex

A unique value for each logical storage area contained by the host. Refer to RFC 1514, Host Resources MIB, for more details.

hrstoragetype

The type of storage represented by this entry. Refer to RFC 1514, Host Resources MIB, for more details.

hrstoragedescr

A description of the type and instance of the storage described by this entry. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: This object is not localized.

hrstorageallocationunits

The size, in bytes, of the data objects allocated from this pool. If this entry is monitoring sectors, blocks, buffers, or packets, for example, this number will commonly be greater than one. Otherwise this number will typically be one. Refer to RFC 1514 ...

hrstoragesize

The size of the storage represented by this entry, in units of hrStorageAllocationUnits. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: Total formatter RAM.

hrstorageused

The amount of the storage represented by this entry that is allocated, in units of hrStorageAllocationUnits. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: This object should not be used when creating a print job for the ...

hrstorageallocationfailures

The number of requests for storage represented by this entry that could not be honored due to not enough storage. It should be noted that as this object has a SYNTAX of Counter, that it does not have a defined initial value. However, it is recommended t ...

hrdeviceindex

A unique value for each device contained by the host. The value for each device must remain constant at least from one re-initialization of the agent to the next re-initialization. Refer to RFC 1514, Host Resources MIB, for more details. Additional infor ...

hrdevicetype

An indication of the type of device. If this value is `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry exists in the hrProcessorTable which corresponds to this device. If this value is `hrDeviceNetwork { hrDeviceTypes 4 }', then an entry exists in th ...

hrdevicedescr

A textual description of this device, including the device's manufacturer and revision, and optionally, its serial number. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: This object is not localized and a serial number is ...

hrdeviceid

The product ID for this device. Refer to RFC 1514, Host Resources MIB, for more details. Additional information: The complete OID reported by this object is: .1.3.6.1.4.1.11.2.3.9.1.2.8

hrdevicestatus

The current operational state of the device described by this row of the table. A value unknown(1) indicates that the current state of the device is unknown. running(2) indicates that the device is up and running and that no unusual error conditions are ...

hrdeviceerrors

The number of errors detected on this device. It should be noted that as this object has a SYNTAX of Counter, that it does not have a defined initial value. However, it is recommended that this object be initialized to zero. Refer to RFC 1514, Host Reso ...

hrprinterstatus

The current status of this printer device. When in the idle(1), printing(2), or warmup(3) state, the corresponding hrDeviceStatus should be running(2) or warning(3). When in the unknown state, the corresponding hrDeviceStatus should be unknown(1). Refer ...

hrprinterdetectederrorstate

This object represents any error conditions detected by the printer. The error conditions are encoded as bits in an octet string, with the following definitions: Condition Bit # hrDeviceStatus lowPaper 0 warning(3) noPaper ...

prtgeneralconfigchanges

Counts configuration changes that change the capabilities of a printer, such as the addition/deletion of input/output bins, the addition/deletion of interpreters, or changes in media size. Such changes will often affect the capability of the printer to s ...

prtgeneralcurrentlocalization

The value of the prtLocalizationIndex corresponding to the current language, country, and character set to be used for localized string values that are identified as being dependent on the value of this object. Note that this object does not apply to loc ...

prtgeneralreset

Setting this value to `powerCycleReset', `resetToNVRAM', or `resetToFactoryDefaults' will result in the resetting of the printer. When read, this object will always have the value `notResetting(3)', and a SET of the value `notResetting' shall have no eff ...

prtgeneralcurrentoperator

The name of the person who is responsible for operating this printer. It is suggested that this string include information that would enable other humans to reach the operator, such as a phone number. As a convention to facilitate automatic notification o ...

prtgeneralserviceperson

The name of the person responsible for servicing this printer. It is suggested that this string include information that would enable other humans to reach the service person, such as a phone number. As a convention to facilitate automatic notification of ...

prtinputdefaultindex

The value of prtInputIndex corresponding to the default input sub-unit: that is, this object selects the default source of input media. This value shall be -1 if there is no default input subunit specified for the printer as a whole. In this case, the ac ...

prtoutputdefaultindex

The value of prtOutputIndex corresponding to the default output sub-unit; that is, this object selects the default output destination. This value shall be -1 if there is no default output subunit specified for the printer as a whole. In this case, the ...

prtmarkerdefaultindex

The value of prtMarkerIndex corresponding to the default marker sub-unit; that is, this object selects the default marker. Additional information: LaserJet 4500 only has one marker subunit.

prtmediapathdefaultindex

The value of prtMediaPathIndex corresponding to the default media path; that is, the selection of the default media path. Additional information: This object can be set when the printer is not idle, and will return if successful, but the change ...

prtconsolelocalization

The value of the prtLocalizationIndex corresponding to the language, country, and character set to be used for the console. This localization applies both to the actual display on the console as well as the encoding of these console objects in management ...

prtconsolenumberofdisplaylines

The number of lines on the printer's physical display. This value is 0 if there are no lines on the physical display or if there is no physical display Additional information: The printer has two physical lines on the display, however, in many cases up t ...

prtconsolenumberofdisplaychars

The number of characters per line displayed on the physical display. This value is 0 if there are no lines on the physical display or if there is no physical display

prtconsoledisable

If the object prtConsoleDisable has value 'operatorConsoleDisabled' then input is not accepted from the operator console. If the object prtConsoleDisable has the value 'operatorConsoleEnabled' then input is accepted from the operator console. If the objec ...

prtgeneralstartuppage

Used to enable or disable printing a startup page. If enabled, a startup page will be printed shortly after power-up, when the device is ready. Typical startup pages include test patterns and/or printer configuration information.

prtgeneralbannerpage

Used to enable or disable printing banner pages at the beginning of jobs. This is a master switch which applies to all jobs, regardless of interpreter.

prtgeneralprintername

An administrator-specified name for this printer. Depending upon implementation of this printer, the value of this object may or may not be same as the value for the MIB-II 'SysName' object. Additional information: The maximum supported string length is 3 ...

prtgeneralserialnumber

A recorded serial number for this device that indexes some type device catalog or inventory. This value is usually set by the device manufacturer but the MIB supports the option of writeability for this object for site-specific administration of device in ...

prtalertcriticalevents

A running counter of the number of critical alert events that have been recorded in the alert table. The value of this object is RESET in the event of a power cycle operation (i.e., the value is not persistent.

prtalertallevents

A running counter of the total number of alert event entries (critical and non-critical) that have been recorded in the alert table

prtcoverdescription

The manufacturer provided cover sub-mechanism name in the localization specified by prtGeneralCurrentLocalization.

prtcoverstatus

The status of this cover sub-unit.

prtlocalizationlanguage

A two character language code from ISO 639. Examples en, gb, ca, fr, de. Additional information: The languages supported by LaserJet 4500, the language code and country are: Czech (cs, Czechoslovakia) Danish (da, Denmark) Dutch (nl, Netherlands) English ...

prtstoragerefindex

The value of the hrDeviceIndex of the printer device that this storageEntry is associated with.

prtdevicerefindex

The value of the hrDeviceIndex of the printer device that this deviceEntry is associated with.

prtinputtype

The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Optional Input Class provides for a descriptor field to further qualify the other choice. Additional information: Tray 1 is the ...

prtinputdimunit

The unit of measurement for use calculating and relaying dimensional values for this input sub-unit.

prtinputmediadimfeeddirdeclared

This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. The feed direction is the direction in which the media is fed on this sub-unit. This dimension i ...

prtinputmediadimxfeeddirdeclared

This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. The cross feed direction is ninety degrees relative to the feed direction associated with ...

prtinputmediadimfeeddirchosen

The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this value will be used even if the input tray is empty. Feed dimension measurements are taken relative to the feed direction asso ...

prtinputmediadimxfeeddirchosen

The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that this value will be used even if the input tray is empty. The cross feed direction is ninety degrees relative to the feed dir ...

prtinputcapacityunit

The unit of measurement for use in calculating and relaying capacity values for this input sub-unit. Additional information: A sheet is a single piece of 20 pound paper. The tray 3 object does not exist when that option is NOT installed.

prtinputmaxcapacity

The maximum capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so this value reflects claimed capacity. If this input sub-unit can reliably sense this value, the va ...

prtinputcurrentlevel

The current capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests; otherwise, the value m ...

prtinputstatus

The current status of this input sub-unit.

prtinputmedianame

A description of the media contained in this input sub-unit; This description is intended for display to a human operator. This description is not processed by the printer. It is used to provide information not expressible in terms of the other media att ...

prtinputname

The name assigned to this input sub-unit. Additional information: The tray 3 object does not exist when that option is NOT installed. These strings are not localized.

prtinputvendorname

The vendor name of this input sub-unit. Additional information: The tray 3 object does not exist when that option is NOT installed.

prtinputmodel

The model name of this input sub-unit. Additional information: LaserJet 4500 does not specify a model name for the Tray1 or Tray2. The tray 3 object does not exist when that option is NOT installed.

prtinputversion

The version of this input sub-unit. Additional information: LaserJet 4500 does not specify a version number for the input trays. The tray 3 object does not exist when that option is NOT installed.

prtinputserialnumber

The serial number assigned to this input sub-unit. Additional information: LaserJet 4500 does not specify a serial number for the input trays. The tray 3 object does not exist when that option is NOT installed.

prtinputdescription

A free-form text description of this input sub-unit in the localization specified by prtGeneralCurrentLocalization. Additional information: The tray 3 object does not exist when that option is NOT installed.

prtinputsecurity

Indicates if this input sub-unit has some security associated with it. Additional information: No security mechanism provided. The tray 3 object does not exist when that option is NOT installed.

prtinputmedialoadtimeout

When the printer is not able to print due to a subunit being empty or the requested media must be manually loaded, the printer will wait for the duration (in seconds) specified by this object. Upon expiration of the timeout, the printer will take the acti ...

prtinputnextindex

The value of prtInputIndex corresponding to the input subunit which will be used when this input subunit is emptied and the timeout specified by prtInputMediaLoadTimeout expires. A value of zero(0) indicates that auto input switching will not occur when t ...

prtoutputtype

The type of technology supported by this output sub-unit. Additional information: LaserJet 4500 has two built-in output bins: a face-down bin located at the top of the printer and a face-up bin located at the rear of the printer. However, neither of these ...

prtoutputcapacityunit

The unit of measurement for use in calculating and relaying capacity values for this output sub-unit. Additional information: A sheet is a single piece of 20 pound paper.

prtoutputmaxcapacity

The maximum capacity of this output sub-unit in output sub-unit capacity units (PrtCapacityUnitTC). There is no convention associated with the media itself so this value essentially reflects claimed capacity. If this output sub-unit can reliably sense thi ...

prtoutputremainingcapacity

The remaining capacity of the possible output sub-unit capacity in output sub-unit capacity units (PrtCapacityUnitTC) of this output sub-unit. If this output sub-unit can reliably sense this value, the value is sensed by the printer and may not be modifie ...

prtoutputstatus

The current status of this output sub-unit. Additional information: The default value assumes an empty bin. The value of this object is a combination of the following values: Bit 0 is the least significant bit. Bit 0 : Availability Value Bit 1 : Availabil ...

prtmarkermarktech

The type of marking technology used for this marking sub-unit.

prtmarkercounterunit

The unit that will be used by the printer when reporting counter values for this marking sub-unit. The time units of measure are provided for a device like a strip recorder that does not or cannot track the physical dimensions of the media and does not u ...

prtmarkerlifecount

The count of the number of units of measure counted during the life of printer using units of measure as specified by prtMarkerCounterUnit. Additional information: This is the equivalent of the total page count. The count is updated each sheet of media. ...

prtmarkerpoweroncount

The count of the number of units of measure counted since the equipment was most recently powered on using units of measure as specified by prtMarkerCounterUnit.

prtmarkerprocesscolorants

The number of process colors supported by this marker. A process color of 1 implies monochrome. The value of this object and prtMarkerSpotColorants cannot both be 0. The value of prtMarkerProcessColorants must be 0 or greater. Additional information: L ...

prtmarkerspotcolorants

The number of spot colors supported by this marker. The value of this object and prtMarkerProcessColorants cannot both be 0. Must be 0 or greater.

prtmarkeraddressabilityunit

The unit of measure of distances, as applied to the marker's resolution. Additional information: This will always be ePtenThousandthsOfInches, no matter what COLD-RESET-MEDIA-SIZE is because we are talking about resolution and toner addressability, which ...

prtmarkeraddressabilityfeeddir

The maximum number of addressable marking positions in the feed direction per 10000 units of measure specified by prtMarkerAddressabilityUnit. A value of (-1) implies 'other' or 'infinite' while a value of (-2) implies 'unknown'. Additional information: ...

prtmarkeraddressabilityxfeeddir

The maximum number of addressable marking positions in the cross feed direction in 10000 units of measure specified by prtMarkerAddressabilityUnit. A value of (-1) implies 'other' or 'infinite' while a value of (-2) implies 'unknown'. Additional informat ...

prtmarkernorthmargin

The margin, in units identified by prtMarkerAddressabilityUnit, from the leading edge of the medium as the medium flows through the marking engine with the side to be imaged facing the observer. The leading edge is the North edge and the other edges are d ...

prtmarkersouthmargin

The margin from the South edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by all four margins is guaranteed for all interpreters. The value (-2) means unknown.

prtmarkerwestmargin

The margin from the West edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by all four margins is guaranteed for all interpreters. The value (-2) means unknown.

prtmarkereastmargin

The margin from the East edge (see prtMarkerNorthMargin) of the medium in units identified by prtMarkerAddressabilityUnit. Printing within the area bounded by all four margins is guaranteed for all interpreters. The value (-2) means unknown.

prtmarkerstatus

The current status of this marker sub-unit. Additional information: The default value assumes no malfunctions. The value of this object is a combination of the following values: Bit 0 is the least significant bit. Bit 0 : Availability Value Bit 1 : Availa ...

prtmarkersuppliesmarkerindex

The value of prtMarkerIndex corresponding to the marking sub-unit with which this marker supply sub-unit is associated.

prtmarkersuppliescolorantindex

The value of prtMarkerColorantIndex corresponding to the colorant with which this marker supply sub-unit is associated. This value shall be 0 if there is no colorant table.

prtmarkersuppliesclass

Indicates whether this supply entity represents a supply that is consumed or a receptacle that is filled.

prtmarkersuppliestype

The type of this supply.

prtmarkersuppliesdescription

The description of this supply container/receptacle in the localization specified by prtGeneralCurrentLocalization.

prtmarkersuppliessupplyunit

Unit of measure of this marker supply container/receptacle.

prtmarkersuppliesmaxcapacity

The maximum capacity of this supply container/receptacle expressed in prtMarkerSuppliesSupplyUnit. If this supply container/receptacle can reliably sense this value, the value is reported by the printer and is read-only; otherwise, the value may be writte ...

prtmarkersupplieslevel

The current level if this supply is a container; the remaining space if this supply is a receptacle. If this supply container/receptacle can reliably sense this value, the value is reported by the printer and is read-only; otherwise, the value may be writ ...

prtmarkercolorantmarkerindex

The value of prtMarkerIndex corresponding to the marker sub-unit with which this colorant entry is associated. Additional information: LaserJet 4500 only has one marker. Therefore, the value of these objects is always 1.

prtmarkercolorantrole

The role played by this colorant. Additional information: All LaserJet 4500 colorants are process colorants.

prtmarkercolorantvalue

The name of the color of this colorant using standardized string names from ISO 10175 (DPA) and ISO 10180 (SPDL) which are: other unknown white red green blue cyan magenta yellow black Implementors may add additional string values. The naming conventions ...

prtmarkercoloranttonality

The distinct levels of tonality realizable by a marking sub-unit when using this colorant. This value does not include the number of levels of tonal difference that an interpreter can obtain by techniques such as half toning. This value must be at least ...

prtmediapathmaxspeedprintunit

The unit of measure used in specifying the speed of all media paths in the printer.

prtmediapathmediasizeunit

The units of measure of media size for use in calculating and relaying dimensional values for all media paths in the printer.

prtmediapathmaxspeed

The maximum printing speed of this media path expressed in prtMediaPathMaxSpeedUnit's. A value of (-1) implies 'other'. Additional information: The page size for this performance is 8.5x11. The duplex speed is based on 6.4 ppm.

prtmediapathmaxmediafeeddir

The maximum physical media size in the feed direction of this media path expressed in units of measure specified by PrtMediaPathMediaSizeUnit. A value of (-1) implies 'unlimited', a value of (-2) implies 'unknown'. Additional information: The values retu ...

prtmediapathmaxmediaxfeeddir

The maximum physical media size across the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (-2) implies 'unknown'. Additional information: The values returned by these objects depend on t ...

prtmediapathminmediafeeddir

The minimum physical media size in the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (-2) implies 'unknown'. Additional information: The value returned by this object depends on the valu ...

prtmediapathminmediaxfeeddir

The minimum physical media size across the feed direction of this media path expressed in units of measure specified by prtMediaPathMediaSizeUnit. A value of (-2) implies 'unknown'. Additional information: The value returned by this object depends on the ...

prtmediapathtype

The type of the media path for this media path.

prtmediapathdescription

The manufacturer-provided description of this media path in the localization specified by prtGeneralCurrentLocalization.

prtmediapathstatus

The current status of this media path. Additional information: The default values assume the printer is idle The value of this object is a combination of the following values: Bit 0 is the least significant bit. Bit 0 : Availability Value Bit 1 : Availabi ...

prtchanneltype

The type of this print data channel. This object provides the linkage to ChannelType-specific groups that may (conceptually) extend the prtChannelTable with additional details about that channel. Additional information: IIO- based channels provide their ...

prtchannelprotocolversion

The version of the protocol used on this channel. The format used for version numbering depends on prtChannelType. Additional information: IIO-based channels provide their own values. The channel 1 value includes (separated by semi colons) different aspe ...

prtchannelcurrentjobcntllangindex

The value of prtInterpreterIndex corresponding to the Control Language Interpreter for this channel. This interpreter defines the syntax used for control functions, such as querying or changing environment variables and identifying job boundaries (e.g. P ...

prtchanneldefaultpagedesclangindex

The value of prtInterpreterIndex corresponding to the Page Description Language Interpreter for this channel. This interpreter defines the default Page Description Language interpreter to be used for the print data unless the Control Language is used to ...

prtchannelstate

The state of this print data channel. The value determines whether control information and print data is allowed through this channel or not. Additional information: IIO-based channels provide their own values for this object. The base-printer's ports a ...

prtchannelifindex

The value of ifIndex (in the ifTable; see the interface section of MIB-2/RFC 1213) which corresponds to this channel. When more than one row of the ifTable is relevant, this is the index of the row representing the topmost layer in the interface hierarchy ...

prtchannelstatus

The current status of the channel. Additional information: IIO-based channels provide their own values for this object. The value of this object is a combination of the following values: Bit 0 is the least significant bit. Bit 0 : Availability Value Bit 1 ...

prtinterpreterlangfamily

The family name of a Page Description Language (PDL) or control language which this interpreter in the printer can interpret or emulate. Additional information: These values are derived from the dateCode field of the personality entities. (ePlangAutomatic ...

prtinterpreterlanglevel

The level of the language which this interpreter is interpreting or emulating. This might contain a value like '5e' for an interpreter which is emulating level 5e of the PCL language. It might contain '2' for an interpreter which is emulating level 2 of ...

prtinterpreterlangversion

The date code or version of the language which this interpreter is interpreting or emulating. Additional information: These values are derived from the dateCode field of the personal ity entities. (ePlangAutomatic uses the PJL dateCode.)

prtinterpreterdescription

A string to identify this interpreter in the localization specified by prtGeneralCurrentLocalization as opposed to the language which is being interpreted. It is anticipated that this string will allow manufacturers to unambiguously identify their interp ...

prtinterpreterversion

The date code, version number, or other product specific information tied to this interpreter. This value is associated with the interpreter, rather than with the version of the language which is being interpreted or emulated. Additional information: Sam ...

prtinterpreterdefaultorientation

The current orientation default for this interpreter. This value may be overridden for a particular job (e.g., by a command in the input data stream). Additional information: The automatic language switching and PJL interpreters ignore the value of this ...

prtinterpreterfeedaddressability

The maximum interpreter addressability in the feed direction in 10000 prtMarkerAddressabilityUnits (see prtMarkerAddressabilityFeedDir ) for this interpreter. The value (-1) means other and specifically indicates that the sub-unit places no restrictions o ...

prtinterpreterxfeedaddressability

The maximum interpreter addressability in the cross feed direction in 10000 prtMarkerAddressabilityUnits (see prtMarkerAddressabilityXFeedDir) for this interpreter. The value (-1) means other and specifically indicates that the sub-unit places no restrict ...

prtinterpreterdefaultcharsetin

The default coded character set for input octets encountered outside a context in which the Page Description Language established the interpretation of the octets. (Input octets are presented to the interpreter through a path defined in the channel group. ...

prtinterpretertwoway

Indicates whether or not this interpreter returns information back to the host.

prtconsoledisplaybuffertext

The content of a line in the logical display buffer of the operator's console of the printer. When a write operation occurs, normally a critical message, to one of the LineText strings, the agent should make that line displayable if a physical display is ...

prtconsoleofftime

This object, in conjunction with prtConsoleOnTime, defines the current status of the light. If both prtConsoleOnTime and prtConsoleOffTime are non-zero, the lamp is blinking and the values presented define the on time and off time, respectively, in milli ...

prtconsolecolor

The color of this light.

prtconsoledescription

The vendor description or label of this light in the localization specified by prtConsoleLocalization.

prtalertseveritylevel

The level of severity of this alert table entry. The printer determines the severity level assigned to each entry into the table. Additional information: The alert table in LaserJet 4500 will hold up to 32 entries. If the table is full and a new alert o ...

prtalerttraininglevel

See textual convention PrtAlertTrainingLevelTC Additional information: The value of this object depends on the alert condition. e.g., ePuntrained: Paper out. ePtrained: Toner low. ePfieldService: Marker failure. The alert table in LaserJet 4500 will hold ...

prtalertgroup

The type of sub-unit within the printer model that this alert is related. Input, output, and markers are examples of printer model groups, i.e., examples of types of sub-units. Wherever possible, these enumerations match the sub-identifier that identifie ...

prtalertgroupindex

An index of the row within the principle table in the group identified by prtAlertGroup that represents the sub-unit of the printer that caused this alert. The combination of the prtAlertGroup and the prtAlertGroupIndex defines exactly which printer sub- ...

prtalertlocation

The sub-unit location that is defined by the printer manufacturer to further refine the location of this alert within the designated sub-unit. The location is used in conjunction with the Group and GroupIndex values; for example, there is an alert in Inp ...

prtalertcode

See associated textual convention PrtAlertCodeTC Additional information: The alert table in LaserJet 4500 will hold up to 32 entries. If the table is full and a new alert occurs, the table will be managed as specified in the section 'Alert Table Manageme ...

prtalertdescription

A description of this alert entry in the localization specified by prtGeneralCurrentLocalization. The description is provided by the printer to further elaborate on the enumerated alert or provide information in the case where the code is classified as ` ...

prtalerttime

The value of sysUpTime at the time that this alert was generated. Additional information: The alert table in LaserJet 4500 will hold up to 32 entries. If the table is full and a new alert occurs, the table will be managed as specified in the section 'Ale ...