hpprocurve-v2-config

hpprocurve-v2-config Download

MIBs list

CONFIG-MIB

IPHost Network Monitor offer an easy way of SNMP monitoring your Hewlett Packard network devices.

OID list for hpprocurve-v2-config

hpSwitchAutoReboot
If the value of this variable was set to yes(1), booting will conditionally enable all application modules-the spanning tree, IP and IPX etc.. Otherwise every application module must be manually enabled through Network Control Language Interpreter's ENABL ...
hpSwitchTimeZone
The number of minutes to the west of Greenwich Mean Time(GMT). For a location ease of GMT, use a negative integer.
hpSwitchDaylightTimeRule
The daylight savings time rule for use by the Internet's RFC 868 Time protocol.
hpSwitchDaylightBeginningMonth
The month that daylight saving time starts if DaylightTimeRule is set to userDefined.
hpSwitchDaylightBeginningDay
The day of the month that daylight saving time starts if DaylightTimeRule is set to userDefined.
hpSwitchDaylightEndingMonth
The month that daylight saving time ends if DaylightTimeRule is set to userDefined.
hpSwitchDaylightEndingDay
The day of the month that daylight saving time emds if DaylightTimeRule is set to userDefined.
hpSwitchSystemConfigStatus
The configuration status of this group of objects. If one or more variables in this group were reconfigurated since last reboot and required reboot to take effect, the value of this variable will be set to notInService.
hpSwitchSystemPortLEDMode
The mode of the port LED can be either link/activity (link for 3 seconds then activity thereafter) or link-only.
hpSwitchTelnetAdminStatus
The status of the console telnet operation.
hpSwitchTerminalType
Terminal type of the console device.
hpSwitchConsoleRefRate
The rate, in second per cycle, at which the display of various switch measurements.
hpSwitchDisplayedEvent
The type of event messages are automatically displayed on the console.
hpSwitchConsoleConfigStatus
The configuration status of this group of objects. If one or more variables in this group were reconfigurated since last reboot and required reboot to take effect, the value of this variable will be set to notInService.
hpSwitchPortTable
A table that contains information about the current port status in this device.
hpSwitchPortEntry
Information about a specific port status in this device.
hpSwitchPortIndex
The ifIndex value which uniquely identifies a row in the Interfaces Table.
hpSwitchPortType
The ifType value.
hpSwitchPortDescr
A textual string containing information about the interface.
hpSwitchPortAdminStatus
The desired state of the interface. This variable is similar to the ifAdminStatus but instead of keeping the operational status, this variable maintain the desired state in the configuration data base.
hpSwitchPortEtherMode
The type of transmission on this port. This variable is valid only if the hpSwitchPortType was Ethernet.
hpSwitchPortVgMode
The type of transmission on this port. This variable is valid only if the hpSwitchPortType was VG.
hpSwitchPortLinkbeat
The linkbeat status of this port.
hpSwitchPortTrunkGroup
The trunk group this port belong to.
hpSwitchPortBcastLimit
The percentage of network bandwidth consumed by broadcast traffic through this port. If the value of this variable is 0, there will be no broadcast limit.
hpSwitchPortFastEtherMode
The type of transmission on this port. This variable is valid only if the hpSwitchPortType was Fast Ethernet.
hpSwitchPortFlowControl
The Flow Control of this port.
hpSwitchPortConfigStatus
The configuration status of this group of objects. If one or more variables in this group were reconfigurated since last reboot and required reboot to take effect, the value of this variable will be set to notInService.
hpSwitchIpxConfigStatus
The status of the IPX configuration table.
hpSwitchIpTimepAdminStatus
The operational status of the Time protocol.
hpSwitchIpTimepServerAddr
The IP address of the Time server.
hpSwitchIpTimepPollInterval
The client poll interval of the Time server in minute.
hpSwitchIpConfigStatus
The configuration status of the Timep and IP related objects.
hpSwitchSLinkBaudRate
The rate of data transfer between the console and the node. baudRate1 is speed sense.
hpSwitchSLinkFlowCtrl
The flow-control mechanism between the console and the switch.
hpSwitchSLinkConnInactTime
The number of minutes to wait after no character was input to log out the console. Valid values are 0(not to log out of the console for inactivity) through 120(two hours).
hpSwitchSLinkModemConnTime
The number of seconds to wait for data mode and clear to send and receiver ready signals after asserting request to send and terminal ready signals. Valid values are 0(switch will wait forever for the modem) through 300(5 minutes).
hpSwitchSLinkModemLostRecvTime
The number of milliseconds the receiver ready signal is allowed to drop before the switch will disconnect the modem. Valid values are 0(the switch will wait forever) through 5000 (5 seconds).
hpSwitchSLinkModemDisConnTime
The number of seconds to wait after the modem is disconnected before allowing the modem to be reconnected. Valid values are 0(allow a connection as soon as possible, the default) through 60 (1 minute).
hpSwitchSLinkParity
The type of parity to use between the console and the node.
hpSwitchSLinkCharBits
The number of bits per character to use between the console and the node.
hpSwitchSLinkStopBits
The number of stop bots to use when communicating between the console and the node.
hpSwitchSLinkConfigStatus
The configuration status of this group of objects. If one or more variables in this group were reconfigurated since last reboot and required reboot to take effect, the value of this variable will be set to notInService.
hpSwitchFilterConfigTable
A table that contains information about the traffic filter configuration in this device.
hpSwitchFilterConfigEntry
Information about a traffic filter configuration in this device.
hpSwitchFilterIndex
An index that uniquely identifies a traffic filter for which this entry contains information.
hpSwitchFilterType
The type of filter.
hpSwitchFilterSrcPort
This variable is required when a port filter or unicast filter was configurated. It will be ignored otherwise.
hpSwitchFilterMacAddr
This variable is valid only if a unicast or multicast filter was defined. It will be ignored otherwise.
hpSwitchFilterProtocolType
This variable is valid only if a level-3 filter was defined. It will be ignored otherwise. This variable will contain either a etherType(DIX Ethernet) or SAP(IEEE 802) value of the level-3 protocol.
hpSwitchFilterPortMask
This variable specifies a group of ports whose traffic will be filtered. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Wit ...
hpSwitchFilterEntryStatus
The status of a filter entry.
hpSwitchProbeType
If the value of this variable is equal to 1, the probe will monitor those ports specified by hpSwitchProbedPortMask, otherwise all of the port belong to the virtual LAN specified by hpSwitchProbedVlanId will be monitored.
hpSwitchProbedVlanId
The probed virtual LAN.
hpSwitchProbePort
The port that every packet passes through those probed ports will be copied to.
hpSwitchProbeAdminStatus
The operational status of the probing function
hpSwitchProbedPortMask
This variable specifies a group of ports which will be probed. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each o ...
hpSwitchFddiIpFragConfigTable
A list of IP fragmentation configuration parameters for the FDDI cards in the switch.
hpSwitchFddiIpFragConfigEntry
An Fddi IP fragmentation entry which is containing configurable options for the FDDI cards in the switch.
hpSwitchFddiIpFragConfigIndex
A unique value for each FDDI Card. The value for each FDDI card must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
hpSwitchFddiIpFragConfigStatus
The operational status of FDDI IP fragmentation for each FDDI card. enable(1): FDDI card will fragment all packets which are bigger then the Ethernet packet size limitation, 1518 Bytes. disable(2): FDDI card will drop all packets which are bigger then the ...
hpSwitchABCConfigTable
A list of Automatic Broadcast Control (ABC disable/enable entries for each VLAN on the switch.
hpSwitchABCConfigEntry
Contains the ABC status for each VLAN on the switch, including IP RIP control and IPX RIP/SAP control.
hpSwitchABCConfigVlan
The user is able to enable/disable ABC on a per VLAN basis, so the VLAN serves as an index into the ABC configuration table.
hpSwitchABCConfigControl
ABC control is either IP&IPX or IP or IPX or disabled for each VLAN on the switch.
hpSwitchABCConfigIpRipControl
IP RIP control. If this feature is enabled then IP RIP packets will only be forwarded on ports, within its VLAN domain, that have heard RIPs before. If this feature is disabled then IP RIP packets seen by a given port will be forwarded to all ...
hpSwitchABCConfigIpxRipSapControl
IPX RIP/SAP control. If this feature is enabled then IPX RIP/SAP packets will only be forwarded on ports, within its VLAN domain, that have previously seen RIP/SAP packets. If this feature is disabled then IPX RIP and SAP packets seen by a given ...
hpSwitchABCConfigVlanBcastLimit
The percentage of network bandwidth consumed by broadcast traffic through VLAN. If the value of this variable is 0, there will be no broadcast limit. There is a default value chosen when ABC is enabled.
hpSwitchStpVlanTable
A table that contains vlan-specific information for the Spanning Tree Protocol.
hpSwitchStpVlanEntry
A list of information maintained by every port about the Spanning Tree Protocol state for that port.
hpSwitchStpVlan
The operational status of the spanning tree protocol.
hpSwitchStpAdminStatus
The operational status of the spanning tree protocol.
hpSwitchStpPriority
The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress.
hpSwitchStpMaxAge
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
hpSwitchStpHelloTime
The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently u ...
hpSwitchStpForwardDelay
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which p ...
hpSwitchStpPortTable
A table that contains port-specific information for the Spanning Tree Protocol.
hpSwitchStpPortEntry
A list of information maintained by every port about the Spanning Tree Protocol state for that port.
hpSwitchStpPort
The port number of the port for which this entry contains Spanning Tree Protocol management information.
hpSwitchStpPortType
The ifType value.
hpSwitchStpPortSrcMac
The source MAC address used by the spanning tree protocol.
hpSwitchStpPortPriority
The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of dot1dStpPort.
hpSwitchStpPortPathCost
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN.
hpSwitchIgmpConfigTable
A table that contains information about the IGMP Querier capacity on any given vlan on the switch.
hpSwitchIgmpConfigEntry
Information about the IGMP Querier feature associated with a specific virtal LAN in this device.
hpSwitchIgmpVlanIndex
An index that uniquely identifies the IGMP configuration of a virtual LAN for which this entry contains information.
hpSwitchIgmpState
The operational status of the IGMP support for this virtual LAN.
hpSwitchIgmpQuerierState
The operational status of the IGMP Querier functionality for this virtual LAN.
hpSwitchIgmpPriorityState
The operational status of the IGMP Forward with High Priority mode for this virtual LAN.
hpSwitchIgmpPortConfigTable
A table that contains information about the IGMP port configurations on this switch.
hpSwitchIgmpPortConfigEntry
The information associated with each IGMP port configuration.
hpSwitchIgmpPortIndex
The ifIndex value which uniquely identifies a row in the Interfaces Table.
hpSwitchIgmpPortType
The ifType value.
hpSwitchIgmpIpMcastState
The operational status of the IGMP feature for this port or trunk 1 implies that all IP Multicast traffic will be monitored on the port 2 implies that IP Multicast traffic will be dropped on the port and 3 implies that all IP Multicast traffic will be for ...
hpSwitchIgmpPortConfigTable2
A table that contains information about the IGMP port configurations on this switch. This table supercedes hpSwitchIgmpPortConfigTable for products which support multiple VLANs on each port.
hpSwitchIgmpPortConfigEntry2
The information associated with each IGMP port configuration.
hpSwitchIgmpPortVlanIndex2
The Vlan Index value which uniquely identifies a row in the Interfaces Table.
hpSwitchIgmpPortIndex2
The ifIndex value which uniquely identifies a row in the Interfaces Table.
hpSwitchIgmpPortType2
The ifType value.
hpSwitchIgmpIpMcastState2
The operational status of the IGMP feature for this port or trunk 1 implies that all IP Multicast traffic will be monitored on the port 2 implies that IP Multicast traffic will be dropped on the port and 3 implies that all IP Multicast traffic will be for ...

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list