hub-facs-prvt Download
IPHost Network Monitor offer an easy way of SNMP monitoring your Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for hub-facs-prvt
- rTrapAddrTbl
- must be sent. Up to 10 entries in table
- rTrapAddrEntry
- rTrapAddrAddr
- requesting event notification
- rTrapAddrComm
- entity will expect. When reading the instance of this object the value has no meaning.
- rTrapAddrVer
- destination node
- rTrapAddrType
- reported to this address, bit 0 - authentication trap bit 1 - other SNMP traps bit 2 - Error Traps bit 3 - Diagnostic Traps bit 4 - Debug Traps bit 5 - Enterprise Traps other than fmDiagGenericTrap
- rTrapAddrState
- Determines status of this entry
- rTrapAddrFlag
- be deleted because of aging
- rTrapAddrAge
- Aging time of the entry (in sec)
- rTrapLearning
- automatically.
- rTrapAging
- entry
- pTrapAddrTbl
- must be sent. Up to 10 entries in table
- pTrapAddrEntry
- pTrapAddrAddr
- requesting event notification
- pTrapAddrComm
- entity will expect. When reading the instance of this object the value has no meaning.
- pTrapAddrVer
- destination node
- pTrapAddrType
- reported to this address, bit 0 - authentication trap bit 1 - other SNMP traps bit 2 - Error Traps bit 3 - Diagnostic Traps bit 4 - Debug Traps bit 5 - all Enterprise Traps other than fmDiagGenericTrap
- pTrapAddrState
- Determines status of this entry
- pTrapLearning
- automatically.
- pTrapAging
- entry
- fmSystemReset
- When reading the instance of this object the value has no meaning. cold reset is performed with selftest , while warm start is performed without selftest
- fmSystemSelfTestLevel
- executed upon cold-reset
- fmSystemIpAddr
- IP address of the agent
- fmSystemIPNetMask
- IP Network Mask
- fmSystemIPDefGway
- Default Gateway Address
- fmSystemFileServer
- IP address to which a TFTP for boot is sent.
- fmSystemBootFile
- sent as a TFTP request
- fmSystemDownLoad
- When reading the instance of this object the value has no meaning.
- fmSystemSlipIpAddr
- This is object is available only when slip interface exist
- fmSystemSlipIPNetMask
- This is object is available only when slip interface exist
- fmSystemSlipBaudRate
- This is object is available only when slip interface exist
- fmSystemSlipParity
- This is object is available only when slip interface exist
- fmSystemSlipStopBits
- This is object is available only when slip interface exist
- fmSystemLastSourceIpAddr
- IP message
- fmSystemLastDestinationIpAddr
- IP message. It may be either fmSystemIpAddr or fmSystemSlipIpAddr
- pfmSystemIpAddr
- IP address of the agent
- pfmSystemIPNetMask
- IP Network Mask
- pfmSystemIPDefGway
- Default Gateway Address
- pfmSystemFileServer
- IP address to which a TFTP for boot is sent.
- pfmSystemBootFile
- sent as a TFTP request
- pfmSystemReadCommunity
- When reading the instance of this object the value has no meaning.
- pfmSystemWriteCommunity
- When reading the instance of this object the value has no meaning.
- pfmSystemSlipIpAddr
- This is object is available only when slip interface exist
- pfmSystemSlipIPNetMask
- This is object is available only when slip interface exist
- pfmSystemSlipBaudRate
- This is object is available only when slip interface exist
- pfmSystemSlipParity
- This is object is available only when slip interface exist
- pfmSystemSlipStopBits
- This is object is available only when slip interface exist
- fmDiagTrapInfo
- is the trap code. The rest of the string is the extra information. Contains CR and LF char.
- fmDiagFaultTable
- Table of fault reports from the agent
- fmDiagFaultEntry
- fmDiagFaultIndex
- fault table
- fmDiagFaultReport
- Get the faults detected by the agent
- fmDiagDebug
- write into this variable or improper operation can occur.
- fmDiagDeleteFaults
- table in the e2 and it's ram image to be initialized, setting the object to no-delete(1) does not effect the fault table. when reading the object the value no-delete(1) will always be returned
- fmDebugReadMem
- Reads the bytes from the memory
- fmDebugReadEeprom
- Reads bytes from Eeprom
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.