ibm-vpnpolicy Download

vpSysMibLevel

The level of the IBM VPN Policy MIB.

vpSysUpTime

The length of time in hundredths of a second that the policy definitions have been active.

vpSysCurTime

The current time in seconds since 1900.

vpSysHoursFromCut

The number of hours from Coordinated Universal Time which is abbreviated UTC as specified by the International Telecommunications Union. 1 = (UTC -0)...Coordinated Universal Time; United Kingdom 2 = (UTC -1)...Azores; Cape Verde 3 = (UTC -2)...Falkland Is ...

vpSysCurConfigSource

The current configuration source location(s). 1 = policy refresh in progress 2 = no policies were found in any source location 3 = policies were found in all source locations 4 = policies were found in SRAM 5 = policies were found in LDAP.

vpSysRefreshConfig

This object provides the ability to refresh the system's policies when set and provides the source of the last refresh when read. 1 = refresh policies from the operational (active) policy source location(s) 2 = refresh policies from the administrative (co ...

vpLdapGblOperLdapStatus

The current status of the LDAP Operational parameter values.

vpLdapGblOperPrimServerAddr

The current operational value of the IP Address for the Primary LDAP Server.

vpLdapGblOperSecServerAddr

The current operational value of the IP Address for the Secondary LDAP Server.

vpLdapGblOperServerLdapLvl

The current operational value of the LDAP Server Level.

vpLdapGblOperPolicyBaseName

The current operational value of the Base Name to use when retrieving policies from the LDAP Server.

vpLdapGblOperPortNumber

The current operational value of the Port Number to use when retrieving policies from the LDAP Server.

vpLdapGblOperTimeOut

The current operational value of the Time-Out Period to use when retrieving policies from the LDAP Server.

vpLdapGblOperRetryInterval

The current operational value of the Retry Interval to use when retrieving policies from the LDAP Server.

vpLdapGblOperUserId

The current operational value of the User ID to use when retrieving policies from the LDAP Server.

vpLdapGblAdminLdapStatus

The configured status of the LDAP Administrative parameter values.

vpLdapGblAdminPrimServerAddr

The configured IP Address of the current Primary LDAP Server.

vpLdapGblAdminSecServerAddr

The configured IP Address of the current Secondary LDAP Server.

vpLdapGblAdminServerLdapLvl

The configured LDAP Server level.

vpLdapGblAdminPolicyBaseName

The configured Base Name to use when retrieving policies from the LDAP Server.

vpLdapGblAdminPortNumber

The configured Port Number to use when retrieving policies from the LDAP Server.

vpLdapGblAdminTimeOut

The configured Time-Out period in seconds to use when retrieving policies from the LDAP Server.

vpLdapGblAdminRetryInterval

The configured Retry Interval in seconds to use when retrieving policies from the LDAP Server.

vpLdapGblAdminUserId

The configured User ID to use when retrieving policies from the LDAP Server.

vpPolicyTable

The VPN Policy Table.

vpPolicyEntry

A VPN Policy Table entry.

vpPolName

The VPN Policy Name.

vpPolStatus

The current status of the VPN Policy. 1 = enabled 2 = disabled.

vpPolPriority

The priority of VPN Policy.

vpPolValidity

The validity of VPN Policy.

vpPolTrafficProfileRef

The name of the Traffic Profile for the VPN Policy. This name can be used to index directly into the vpTrafficProfileTable.

vpPolValidityPeriodRef

The name of the Validity Period for the VPN Policy. This name can be used to index directly into the vpValidityPeriodTable.

vpPolRsvpActionRef

The name of the RSVP Action for the VPN Policy. This name can be used to index directly into the vpRsvpActionTable.

vpPolDiffServActionRef

The name of the Differential Services Action for the VPN Policy. This name can be used to index directly into the vpDiffServActionTable.

vpPolIsakmpActionRef

The name of the ISAKMP Action for the VPN Policy. This name can be used to index directly into the vpIsakmpActionTable.

vpPolSecurityActionRef

The name of the Security Action for the VPN Policy. This name can be used to index directly into the vpSecurityActionTable.

vpPolIpsecManualTunId

The ID of manually configured IPSec Phase-2 Tunnel.

vpPolMatches

The number of packet matches for this VPN Policy.

vpPolicyRulePriTable

The VPN Policy Rule Priority Table.

vpPolicyRulePriEntry

A VPN Policy Rule Priority Table entry.

vpPolRulePriOrder

The priority of this VPN Rule relative to all VPN Rules.

vpPolRulePriName

The VPN Policy Rule Name.

vpPolRulePriStatus

The current status of the VPN Policy Rule. 1 = enabled 2 = disabled.

vpPolRulePriPriority

The VPN Policy Rule Priority.

vpPolRulePriTrafficProfileRef

The name of the Traffic Profile for the VPN Policy Rule. This name can be used to index directly into the vpTrafficProfileTable.

vpPolRulePriValidityPeriodRef

The name of the Validity Period for the VPN Policy. This name can be used to index directly into the vpValidityPeriodTable.

vpPolRulePriRsvpActionRef

The name of the RSVP Action for the VPN Policy. This name can be used to index directly into the vpRsvpActionTable.

vpPolRulePriDiffServActionRef

The name of the Differential Services Action for the VPN Policy. This name can be used to index directly into the vpDiffServActionTable.

vpPolRulePriIsakmpActionRef

The name of the ISAKMP Action for the VPN Policy. This name can be used to index directly into the vpIsakmpActionTable.

vpPolRulePriSecurityActionRef

The name of the Security Action for the VPN Policy. This name can be used to index directly into the vpSecurityActionTable.

vpPolRulePriIpsecManualTunId

The ID of manually configured IPSec Phase-2 Tunnel.

vpPolicyCorTable

The VPN Policy Correlation Table. This table can be used to correlate VPN Policies with VPN Policy Rules. A VPN Policy may be associated with one or more VPN Policy Rules.

vpPolicyCorEntry

A VPN Policy Correlation Table entry.

vpPolCorRuleOrder

The order of this VPN Rule relative to other VPN Rules for this VPN Policy.

vpPolCorRulePriOrder

The priority of this VPN Rule relative to all VPN Rules. This number can be used to index directly into the vpPolicyRulePriTable.

vpTrafficProfileTable

The Traffic Profile Table.

vpTrafficProfileEntry

A Traffic Profile Table entry.

vpTrafProfName

The name of the Traffic Profile.

vpTrafProfHiProtocol

The high protocol number for this Traffic Profile.

vpTrafProfLoProtocol

The low protocol number for this Traffic Profile.

vpTrafProfSrcHiAddr

The high source IP Address for this Traffic Profile.

vpTrafProfSrcLoAddr

The low source IP Address for this Traffic Profile.

vpTrafProfSrcHiPort

The high source port number for this Traffic Profile.

vpTrafProfSrcLoPort

The low source port number for this Traffic Profile.

vpTrafProfDstHiAddr

The high destination IP Address for this Traffic Profile.

vpTrafProfDstLoAddr

The low destination IP Address for this Traffic Profile.

vpTrafProfDstHiPort

The high destination port number for this Traffic Profile.

vpTrafProfDstLoPort

The low destination port number for this Traffic Profile.

vpTrafProfRcvTosByteMask

The Type of Service (TOS) Byte Mask Value. This is a 8-bit mask which is be applied to an incoming packet's TOS byte.

vpTrafProfRcvTosByteMatch

The Type of Service (TOS) Byte Match Value. This is a 8-bit pattern which is used to compare to the value of the result of the ANDing of the incoming TOS byte and the mask value.

vpTrafProfLocIdType

The Traffic Local Identification Type. This value is used in interpreting the Traffic Local Identification Value. 1 = IP V4 Address 2 = Fully Qualified Domain Name 3 = User Fully Qualified Domain Name 9 = Domain Name 10 = Global Name 11 = Key ID 99 = Any

vpTrafProfLocIdValue

The Traffic Local Identification Value. See vpTrafProfLocIdType for more information.

vpTrafProfRemGroup

The Traffic Remote Group Name.

vpTrafficIfTable

The Traffic Interface Table.

vpTrafficIfEntry

A Traffic Interface Table entry.

vpTrafIfIndex

The Traffic Interface index.

vpTrafIfInAddr

The Traffic Interface Inbound IP Address.

vpTrafIfOutAddr

The Traffic Interface Outbound IP Address.

vpTrafficRemIdTable

The Traffic Remote Identification Table.

vpTrafficRemIdEntry

A Traffic Remote Identification Table entry.

vpTrafRemIdIndex

The Traffic Remote Identification Index.

vpTrafRemIdType

The Traffic Remote Identification Type. This value is used in interpreting the Traffic Remote Identification Value. 1 = IP V4 Address 2 = Fully Qualified Domain Name 3 = User Fully Qualified Domain Name 9 = Domain Name 10 = Global Name 11 = Key ID

vpTrafRemIdValue

The Traffic Remote Identification Value. See vpTrafRemIdValueType for more information.

vpTrafRemIdAuthMode

The Traffic Remote Identification Authentication Mode. 1 = preshared key 2 = certificate

vpValidityPeriodTable

The Validity Period Table.

vpValidityPeriodEntry

A Validity Period Table entry.

vpValPrdName

The name of the Validity Period.

vpValPrdStartTime

The Validity Start Time in seconds since 1900. A value of xFF:FF:FF:FF signifies forever.

vpValPrdEndTime

The Validity End Time in seconds since 1900. A value of xFF:FF:FF:FF signifies forever.

vpValPrdMonthMask

The Month Mask for this Validity Period. Each Bit in the Mask represents a month. Octet 2 Octet 1 ---------------------- ------------------------------- 7-4 3 2 1 0 7 6 5 4 3 2 1 0 0's Jan Feb Mar Apr May ...

vpValPrdDaysMask

The Days-Of-The-Week Mask for this Validity Period. Each Bit in the Mask represents a day. Octet 1 ------------------------------- 7 6 5 4 3 2 1 0 0 Mon Tue Wed Thr Fri Sat Sun

vpValPrdStartTod

The Validity Period Start Time-Of-Day. It is represented in the number of seconds since 00:00 AM. A value of xFF:FF:FF:FF signifies all day.

vpValPrdStopTod

The Validity Period End Time-Of-Day. It is represented in the number of seconds since 00:00 AM. A value of xFF:FF:FF:FF signifies all day.

vpRsvpActionTable

The RSVP Action Table.

vpRsvpActionEntry

A RSVP Action Table entry.

vpRsvpActName

The name of the RSVP Action.

vpRsvpActPermission

Permit or deny RSVP requests of with the type of vpRsvpActFlowSvrType.

vpRsvpActMaxRatePerFlow

The Maximum Amount of Bandwidth in Kbytes-Per-Second that RSVP should be allowed to allocate for one individual flow.

vpRsvpActMaxTokenBucketPerFlow

The Maximum Token Bucket to allocate for a RSVP flow.

vpRsvpActMaxFlowDuration

The Maximum Amount of Time in seconds that RSVP should allow a reservation to be active.

vpRsvpActMinDelay

The Minimum Delay in milliseconds that RSVP should be allowed to reserve for an individual RSVP reservation.

vpRsvpActDiffSvrRef

The name of the Differential Services Action for this RSVP Action. This name can be used to index directly into the vpDiffServActionTable.

vpRsvpActMatches

The number of packet matches for this RSVP Action.

vpDiffServActionTable

The Differential Services Action Table.

vpDiffServActionEntry

A Differential Services Action Table entry.

vpDifSrvActName

The name of the Differential Services Action.

vpDifSrvActPermission

Permit or Deny traffic matching the Traffic Profile. This parameter is used as a filter rule to control which IP traffic is allowed to be forwarded.

vpDifSrvActQuePriority

The Queue Priority to be used for traffic.

vpDifSrvActBwType

Specifies whether the bandwidth share is a percentage of the output bandwidth or an absolute number in Kbytes-Per-Second. See also vpDifSrvActBwShare.

vpDifSrvActBwShare

The amount of bandwidth to allocate for packets matching this Differential Services Action. Bandwidth may be specified by percentage of output bandwidth or by an absolute number in Kbytes-Per-Second. See also vpDifSrvActBwType.

vpDifSrvActTransTosByteMask

The Type of Service (TOS) Byte Mask Value. This is a 8-bit mask which is be applied to an incoming packet's TOS byte.

vpDifSrvActTransTosByteMatch

The Type of Service (TOS) Byte Match Value. This is a 8-bit pattern which is used to compare to the value of the result of the ANDing of the incoming TOS byte and the mask value.

vpDifSrvActMatches

The number of packet matches for this Differential Services Action.

vpIsakmpActionTable

The ISAKMP Action Table.

vpIsakmpActionEntry

An ISAKMP Action Table entry.

vpIkActName

The name of the ISAKMP Action.

vpIkActExchangeMode

The Exchange Mode for ISAKMP Phase-1 negotiations.

vpIkActConnSaLifeTime

The Lifetime of the ISAKMP Phase-1 Connection. This specifies the amount of time in seconds after which the Phase-1 Security Association is renegotiated.

vpIkActConnSaLifeSize

The Lifesize of the ISAKMP Phase-1 Connection. This specifies the amount of traffic in Kbytes after which the Phase-1 Security Association is renegotiated.

vpIkActPolicyRole

The ISAKMP Policy Role. 1 = Initiator 2 = Responder 3 = Initiator and Responder

vpIkActMinPercentRefresh

The minimium percentage of the ISAKMP Phase-1 proposals Lifetime that should be considered valid during ISAKMP Phase-1 negotiations.

vpIkActAutoStart

The ISAKMP Auto Start setting. When enabled the Security Association must be automatically negotiated at system initialization.

vpIkActMatches

The number of packet matches for this ISAKMP Action.

vpIsakmpProposalTable

The ISAKMP Proposal Table.

vpIsakmpProposalEntry

An ISAKMP Proposal Table entry.

vpIkPropName

The name of the ISAKMP Proposal.

vpIkPropAuthMethod

The Authentication Method to use in ISAKMP Phase-1 negotiations.

vpIkPropHashAlgo

The Hash Algorithm to use in ISAKMP Phase-1 negotiations.

vpIkPropCipherAlgo

The Cipher Algorithm to use in ISAKMP Phase-1 negotiations.

vpIkPropDiffHellmanGrpId

The Diffie Hellman Group to use in ISAKMP Phase-1 negotiations.

vpIkPropSaLifeTime

The Lifetime of the ISAKMP Phase-1 Connection. This specifies the amount of time in seconds after which the Phase-1 Security Association is renegotiated.

vpIkPropSaLifeSize

The Lifesize of the ISAKMP Phase-1 Connection. This specifies the amount of traffic in Kbytes after which the Phase-1 Security Association is renegotiated.

vpIsakmpCorTable

The ISAKMP Correlation Table. This table can be used to to correlate ISAKMP Actions with ISAKMP Proposals. An ISAKMP Action may be associated with one or more ISAKMP Proposals.

vpIsakmpCorEntry

An ISAKMP Correlation Table entry.

vpIkCorPropOrder

The Proposal Order for the ISAKMP Action.

vpIkCorPropName

The name of the ISAKMP Proposal. This name can be used to index directly into the vpIsakmpProposalTable.

vpIsakmpActiveInstTable

The ISAKMP Active Instance Table.

vpIsakmpActiveInstEntry

An ISAKMP Active Instance Table entry.

vpIkActInstOrder

The Active Instance Creation Order for the ISAKMP Action.

vpIkActInstTunnelId

The ISAKMP Phase-1 Tunnel ID.

vpIkActInstTunnelIndex

The ISAKMP Phase-1 Tunnel Index (ikeTunnelIndex from the IBM IPSec MIB).

vpSecurityActionTable

The Security Action Table.

vpSecurityActionEntry

A Security Action Table entry.

vpSecActName

The name of the Security Action.

vpSecActType

The Type of action which should be performed to packets matching the Traffic Profile of a Policy specifying this action.

vpSecActTunStartAddr

The IP Address of the IPSec Tunnel Starting Point.

vpSecActTunEndAddr

The IP Address of the IPSec Tunnel Ending Point.

vpSecActLocProxyType

The Local Proxy Type. This value is used in interpreting the Local Proxy Value. 1 = IP V4 Address 2 = Fully Qualified Domain Name 3 = User Fully Qualified Domain Name 4 = IP V4 Address Subnet 7 = IP V4 Address Range 9 = Domain Name 10 = Global Name 11 = K ...

vpSecActLocProxyValue

The Local Proxy Value. See vpSecActLocProxyType for more information.

vpSecActLocProxyProtocol

The Local Proxy Protocol.

vpSecActLocProxySrcPort

The Local Proxy Source Port.

vpSecActRemProxyType

The Remote Proxy Type. This value is used in interpreting the Remote Proxy Value. 1 = IP V4 Address 2 = Fully Qualified Domain Name 3 = User Fully Qualified Domain Name 4 = IP V4 Address Subnet 7 = IP V4 Address Range 9 = Domain Name 10 = Global Name 11 = ...

vpSecActRemProxyValue

The Remote Proxy Value. See vpSecActRemProxyType for more information.

vpSecActRemProxyProtocol

The Remote Proxy Protocol.

vpSecActRemProxySrcPort

The Remote Proxy Source Port.

vpSecActSaRefreshThresh

The IPSec Security Association Refresh Threshold. The value is represented as a percentage of the Security Association Lifetime or Security Association Lifesize.

vpSecActMinPercentRefresh

The minimium percentage of the Security Associations Lifetime that should be considered valid during IPSec negotiations.

vpSecActTunnelInTunnel

Specifies whether or not this IPSec Tunnel is protected by another tunnel.

vpSecActAutoStart

The IPSec Auto Start setting. When enabled the Security Association must be automatically negotiated at system initialization.

vpSecActDontFragBitHandling

The IPSec processing to perform on the Don't Fragment (DF) Bit when building a new package header. in the original 1 = Copy the DF Bit from the orginal header to the new header 2 = Set (Turn On) the DF Bit in the new header 3 = Clear (Turn Off) the DF Bit ...

vpSecActReplayPrevention

The IPSec Replay Prevention setting.

vpSecActMatches

The number of packet matches for this Securtiy Action.

vpSecurityProposalTable

The Security Proposal Table.

vpSecurityProposalEntry

A Security Proposal Table entry.

vpSecPropName

The name of the Security Proposal.

vpSecPropPrfFwdSecr

The state of the Perfect Forward Secrecy function.

vpSecPropDiffHellmanGrpId

The Diffie Hellman Group to use in IPSec Phase-2 negotiations.

vpSecurityAhTransTable

The Security AH Transform Table.

vpSecurityAhTransEntry

A Security AH Transform Table entry.

vpSecAhTransName

The name of the AH Transform.

vpSecAhTransIntgAlgo

The AH Integrity Algorithm.

vpSecAhTransEncapMode

The AH Encapsulation Mode.

vpSecAhTransSaLifeTime

The Lifetime of the AH Security Association. This specifies the amount of time in seconds after which the AH Security Association is renegotiated.

vpSecAhTransSaLifeSize

The Lifesize of the AH Security Association. This specifies the amount of traffic in Kbytes after which the AH Security Association is renegotiated.

vpSecurityEspTransTable

The Security ESP Transform Table.

vpSecurityEspTransEntry

A Security ESP Transform Table entry.

vpSecEspTransName

The name of the ESP Transform.

vpSecEspTransEncapMode

The ESP Encapsulation Mode.

vpSecEspTransIntgAlgo

The ESP Integrity Algorithm.

vpSecEspTransCipherAlgo

The ESP Cipher Alogrithm.

vpSecEspTransSaLifeTime

The Lifetime of the ESP Security Association. This specifies the amount of time in seconds after which the ESP Security Association is renegotiated.

vpSecEspTransSaLifeSize

The Lifesize of the ESP Security Association. This specifies the amount of traffic in Kbytes after which the ESP Security Association is renegotiated.

vpSecurityIpcompTransTable

The Security IPCOMP Transform Table.

vpSecurityIpcompTransEntry

A Security IPCOMP Transform Table entry.

vpSecIpcompTransName

The name of the IPCOMP Transform.

vpSecIpcompTransAlgo

The IPCOMP Alogrithm.

vpSecIpcompTransVendAlgo

The IPCOMP Vendor Alogrithm.

vpSecIpcompTransSaLifeTime

The Lifetime of the IPCOMP Security Association. This specifies the amount of time in seconds after which the IPCOMP Security Association is renegotiated.

vpSecIpcompTransSaLifeSize

The Lifesize of the IPCOMP Security Association. This specifies the amount of traffic in Kbytes after which the IPCOMP Security Association is renegotiated.

vpSecurityPropCorTable

The Security Proposal Correlation Table. This table can be used to to correlate Security Actions with Security Proposals. A Security Action may be associated with one or more Security Proposals.

vpSecurityPropCorEntry

A Security Proposal Correlation Table entry.

vpSecCorPropOrder

The Proposal Order for the Security Action.

vpSecCorPropRef

The name of the Security Proposal. This name can be used to index directly into the vpSecurityProposalTable.

vpSecurityAhCorTable

The Security AH Transform Correlation Table. This table can be used to correlate Security Proposals with AH Transforms. A Security Proposal may be associated with one or more AH Transforms.

vpSecurityAhCorEntry

A Security AH Transform Correlation Table entry.

vpSecAhTransCorOrder

The AH Transform Order for the Security Proposal.

vpSecAhTransCorName

The name of the AH Transform. This name can be used to index directly into the vpSecurityAhTransformTable.

vpSecurityEspCorTable

The Security ESP Transform Correlation Table. This table can be used to correlate Security Proposals with ESP Transforms. A Security Proposal may be associated with one or more ESP Transforms.

vpSecurityEspCorEntry

A Security Security ESP Transform Correlation Table entry.

vpSecEspTransCorOrder

The ESP Transform Order for the Security Proposal.

vpSecEspTransCorName

The name of the ESP Transform. This name can be used to index directly into the vpSecurityEspTransformTable.

vpSecurityIpcompCorTable

The Security IPCOMP Transform Correlation Table. This table can be used to correlate Security Proposals with IPCOMP Transforms. A Security Proposal may be associated with one or more IPCOMP Transforms.

vpSecurityIpcompCorEntry

A Security Security IPCOMP Transform Correlation Table entry.

vpSecIpcompTransCorOrder

The IPCOMP Transform Order for the Security Proposal.

vpSecIpcompTransCorName

The name of the IPCOMP Transform. This name can be used to index directly into the vpSecurityIpcompTransformTable.

vpSecurityActiveInstTable

The Security Active Instance Table.

vpSecurityActiveInstEntry

A Security Active Instance Table entry.

vpSecActInstOrder

The Active Instance Order for the Security Action.

vpSecActInstTunnelId

The IPSec Phase-2 Tunnel ID.

vpSecActInstTunnelIndex

The IPSec Phase-2 Tunnel Index (ipSecTunnelIndex from the IBM IPSec MIB).

vpTestPolicyTable

The Policy Test Table.

vpTestPolicyEntry

A Policy Test Table entry.

vpTestPolIndex

The index of the Policy Test Table. The value of the index is a number which was specified during row creation.

vpTestPolSrcAddr

The packet source IP Address which was specified during row creation. This object may not be altered after the row is created.

vpTestPolSrcPort

The packet source port which was specified during row creation. This object may not be altered after the row is created.

vpTestPolDstAddr

The packet destination IP Address which was specified during row creation. This object may not be altered after the row is created.

vpTestPolDstPort

The packet destination port which was specified during row creation. This object may not be altered after the row is created.

vpTestPolProtocol

The packet protocol which was specified during row creation. This object may not be altered after the row is created.

vpTestPolTosByte

The packet Type of Service (TOS) Byte which was specified during row creation. This object may not be altered after the row is created.

vpTestPolIngressAddr

The IP address of the device interface which received the packet. An IP address of 0.0.0.0 should be used to test policies which do NOT have Ingress/Egress interface definitions.

vpTestPolEgressAddr

The IP address of the device interface which will be used to send the packet. An IP address of 0.0.0.0 should be used to test policies which do NOT have Ingress/Egress interface definitions.

vpTestPolResult

The result of the test.

vpTestPolStatus

This object is used to create a new row. It may not be altered after the row is created.

vpTestPolRsvpPolicy

The RSVP Policy Name found for this test. If the result of this test is successful, this object is will contain the a valid policy name if a match was found or NULL if a match was not found. If the result is not successful, the value of this object will ...

vpTestPolRsvpAction

The Rsvp Action Name found for this test. If the result of this test is successful, this object is will contain the a valid action name if a match was found or NULL if a match was not found. If the result is not successful, the value of this object will ...

vpTestPolDiffServPolicy

The Differential Services Policy Name found for this test. If the result of this test is successful, this object is will contain the a valid policy name if a match was found or NULL if a match was not found. If the result is not successful, the value of ...

vpTestPolDiffServAction

The Differential Services Action Name found for this test. If the result of this test is successful, this object is will contain the a valid action name if a match was found or NULL if a match was not found. If the result is not successful, the value of ...

vpTestPolIsakmpPolicy

The ISAKMP Policy Name found for this test. If the result of this test is successful, this object is will contain the a valid policy name if a match was found or NULL if a match was not found. If the result is not successful, the value of this object wil ...

vpTestPolIsakmpAction

The ISAKMP Action Name found for this test. If the result of this test is successful, this object is will contain the a valid action name if a match was found or NULL if a match was not found. If the result is not successful, the value of this object wil ...

vpTestPolIPSecPolicy

The IPSec Policy Name found for this test. If the result of this test is successful, this object is will contain the a valid policy name if a match was found or NULL if a match was not found. If the result is not successful, the value of this object will ...

vpTestPolIPSecAction

The IPSec Action Name found for this test. If the result of this test is successful, this object is will contain the a valid action name if a match was found or NULL if a match was not found. If the result is not successful, the value of this object will ...