a3ComQosNonFlowClassCustomProto
a3 Com Qos Non Flow Class Custom Protocol
1.3.6.1.4.1.43.29.4.21.1.3.1.7
This object determines a 2-byte hex value for the Ethertype or DSAP/SSAP that will be used in conjunction with a3ComQosNonFlowClassProtoDescriptor. If a3ComQosNonFlowClassProtoDescriptor is set to name(1) then this object is not used and it CANNOT be set. If a3ComQosNonFlowClassProtoDescriptor is set to ethertype(2) then the value will be used as an ethertype mask. If a3ComQosNonFlowClassProtoDescriptor is set to dsap-ssap(3) then the most significant byte will be used for the DSAP value and the least significant will be used for the SSAP value. -- Example 1: a3ComQosNonFlowClassProto is set to ethertype (2) a3ComQosNonFlowClassCustomTypeMask is set to 0x1234 The value 0x1234 will be used in the ethertype field. -- Example 2: a3ComQosNonFlowClassCustomType is set to dsap-ssap (2) a3ComQosNonFlowClassCustomTypeMask is set to 0x1234 The value 0x12 would be used for the DSAP value. The value 0x34 would be used for the SSAP value.
Back to A3COM-SWITCHING-SYSTEMS-QOS-MIB MIB page.
IPHost Network monitor uses SNMP for monitoring health and availability of devices and applications in your network. You can send a SNMP Set to any remote device to monitor a specific SNMP object (CPU, Memory, Disk, Server Temperature, RAID failures, IO statistics, connection counts, error and much more).
