With IPHost Network Monitor you can run simple snmp requests against a Alcatel device in your network.
chasEntPhysLedStatus
chas Ent Phys Led Status
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.3
The status of each of the LEDs of this module. Falcon CMM: [11] Fan 1=Green (ok) 0=amber (fail) [10] Temperature 1=Green (ok) 0=amber (fail) [9] Secondary CMM 1=amber 0=OFF [8] Primary CMM 1=amber 0=OFF [7:6] OK2 amber 00=off 01=on 10=blink 11=reserved [5:4] OK2 green 00=off 01=on 10=blink 11=reserved [3:2] OK1 amber 00=off 01=on 10=blink 11=reserved [1:0] OK1 green 00=off 01=on 10=blink 11=reserved Eagle CMM: [17:16] Fan 3 (rear) 00=green 01=amber 10=blink 11=reserved [15:14] Fan 2 (top right) 00=green 01=amber 10=blink 11=reserved [13:12] Fan 1 (top left) 00=green 01=amber 10=blink 11=reserved [11] Status 1=Green (ok) 0=amber (fail) [10] Temperature 1=Green (ok) 0=amber (fail) [9] Secondary CMM 1=amber 0=OFF [8] Primary CMM 1=amber 0=OFF [7:6] OK2 amber 00=off 01=on 10=blink 11=reserved [5:4] OK2 green 00=off 01=on 10=blink 11=reserved [3:2] OK1 amber 00=off 01=on 10=blink 11=reserved [1:0] OK1 green 00=off 01=on 10=blink 11=reserved NI: [7:6] OK2 amber 00=off 01=on 10=blink 11=reserved [5:4] OK2 green 00=off 01=on 10=blink 11=reserved [3:2] OK1 amber 00=off 01=on 10=blink 11=reserved [1:0] OK1 green 00=off 01=on 10=blink 11=reserved FABRIC (Eagle Only): [7:6] OK2 Yellow LED 01=on 00=off [5:4] OK2 Green LED 01=on 00=off [3:2] OK1 Yellow LED 01=on 00=off [1:0] OK1 Green LED 01=on 00=off NOTE: Due to European regulation, the LEDs will NEVER be illuminated RED! They in fact will be either green OR amber.
Back to ALCATEL-IND1-CHASSIS-MIB MIB page.
IPHost Network monitor allows you to monitor chasEntPhysLedStatus on Alcatel device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Alcatel routers right now.
