Cisco CAS LST Answer Meter Delay Timer

1.3.6.1.4.1.9.9.314.1.3.3.1.7

The object specifies the delay between generation of the answer signal and the generation of the meter signal. The GW will start this timer after having sent the line answer signal. DEFVAL { 600 } ::= { ccasIfExtLineSignalTimerEntry 7 } SYNTAX Unsigned32 (1..4294967295) UNITS "milliseconds This object specifies the amount of time for which the line signal should persist to be valid. The value of ccasLSTCASDebounceTimer must be less than or equal the value of following objects: ccasILSMinMakeTime, ccasILSMaxMakeTime, ccasILSMinBreakTime, ccasILSMaxBreakTime in ccasIfExtIncomingLineSignalTable. DEFVAL { 5 } ::= { ccasIfExtLineSignalTimerEntry 8 } SYNTAX Unsigned32 (0..4294967295) UNITS "milliseconds This object specifies the maximum amount of time MG will wait for reception of seize ack signal. Seize Ack signal is expected in response of seize signal. This object is applied for both R2 CAS and non R2 CAS. REFERENCE TIA-689-A: PBX and KTS Support of Enhanced 911 Emergency Calling Service, section 5.2.3.3