Cisco Domain Management Config Domain Id

1.3.6.1.4.1.9.9.302.1.1.1.1.1

The configured Domain ID of the local switch on this VSAN or zero if no Domain ID has been configured. The meaning of this object depends on dmConfigDomainIdType object. If dmConfigDomainIdType is 'preferred', then domain ID configured is called 'preferred Domain ID'. The valid values are between 0 and 239. In a situation where this domain could not be assigned, any other domain ID would be acceptable. The value '0' means any domain ID. If dmConfigDomainIdType is 'static', then domain ID is called 'static Domain ID' and valid values are between 1 and 239. In a situation where this domain was non-zero but could not be assigned, no other domain ID would be acceptable. If the Domain Manager is enabled on the VSAN, then a RDI (Request Domain ID) will be sent requesting this Domain ID. If no Domain ID can be granted in the case of 'preferred' or if the configured 'static' domain ID cannot be not granted then, it is an error condition. When this error occurs, the E_ports on that VSAN will be isolated and user will be informed via 'dmDomainIdNotAssigned' notification. If the domain manager is not enabled, then the static Domain ID is assumed to be granted, if it has been configured (to a valid number). If either of the domain IDs are not configured with a non-zero value on this VSAN and if the domain manager is not enabled, then - switch will isolate all of its E_ports on this VSAN. - The user will be informed via a notification 'dmDomainIdNotAssigned'.