CISCO-DM-MIB Download

dmTable

This table contains Domain Manager related parameters which can be configured and monitored. There is one entry for each of the VSANs configured on this switch. An entry will be created whenever a VSAN is created on the switch. The entry will be removed w ...

dmEntry

An entry provides information on the domain manager for a VSAN.

dmConfigDomainId

The configured Domain ID of the local switch on this VSAN or zero if no Domain ID has been configured. The meaning of this object depends on dmConfigDomainIdType object. If dmConfigDomainIdType is 'preferred', then domain ID configured is called 'preferre ...

dmConfigDomainIdType

Type of configured Domain ID.

dmEnable

Enables the Domain Manager on this VSAN. If enabled on an active VSAN, the switch will participate in principal switch selection. If disabled, the switch will participate in neither the principal switch selection nor domain allocation. Thus, Domain ID nee ...

dmAutoReconfigure

This object determines how the switch responds to certain error conditions. The condition that can cause these errors is merging of two disjoint fabrics that have overlapping Domain ID list. If value of this object is 'true', the switch will send a RCF (R ...

dmContiguousAllocation

Determines how the switch behaves when elected as the principal switch. If true, switch won't accept non-contiguous domain IDs in RDIs and will try to replace all the Domain IDs in the list with contiguous domain IDs if a RDI for a contiguous Domain ID ca ...

dmPriority

Priority of the switch to be used in principal switch selection process.

dmRestart

This object tells the Domain Manager to rebuild the Domain ID tree all over again. If this object is set to 'disruptive', then a RCF (ReConfigure Fabric) is generated in the VSAN in order for the fabric to recover from the errors. If this object is set to ...

dmFabricName

The WWN that is used for fabric logins on this VSAN. This object is used only if the value of dmEnable is false. If the value of dmEnable is true, then principal switch WWN is used. It is automatically set to the default value when set to zero-length valu ...

dmPrincipalSwitchWwn

The WWN of the Principal Switch on this VSAN, or zero-length string if the identity of the principal switch is unknown.

dmLocalSwitchWwn

The WWN of the local Switch on this VSAN.

dmAssignedAreaIdList

The list of Area IDs which have been assigned in this VSAN, formatted as an array of octets in ascending order. There could zero or more Area IDs assigned on this VSAN. Area ID is an 8-bit value. And therefore, each octet represents one Area ID. So, the l ...

dmFcIdsGranted

The total number of FC IDs that are granted (for local use) by the Domain Manager on the local switch since the switch has been initialized. Note that all such FC IDs have the local switch's Domain ID.

dmFcIdsRecovered

The total number of FC IDs that are recovered by the Domain Manager on the local switch since the switch has been initialized. A recovered FC ID is one that is explicitly returned after previously being granted for local use.

dmFreeFcIds

The number of FC IDs that are unassigned on this VSAN.

dmAssignedFcIds

The number of FC IDs that are assigned on this VSAN.

dmReservedFcIds

The number of FC IDs that are reserved on this VSAN.

dmRunningPriority

The running priority of the local switch on this VSAN.

dmPrincSwRunningPriority

The running priority of the principal switch on this VSAN.

dmState

The state of the Domain Manager on the local switch on this VSAN.

dmPrincipalSwitchSelections

The number of principal switch selections on this VSAN.

dmBuildFabrics

The number of 'BuildFabrics' (BFs) that have occurred on this VSAN.

dmFabricReconfigures

The number of 'ReconfigureFabrics' (RCFs) that have occurred on this VSAN.

dmDomainId

The Domain ID of the local switch on this VSAN or zero if no Domain ID has been assigned.

dmLocalPrincipalSwitchSelctns

The number of times the local switch became the principal switch on this VSAN.

dmFcIdPersistency

Indicates if the FC IDs assigned on this VSAN are persistent or not. If this object is set to 'true', then all the FC ID assigned on this VSAN are made persistent on this VSAN. If this object is set to 'false', then all the entries on VSAN in dmFcIdPersis ...

dmIfTable

This table contains interface configuration of the domain manager per VSAN. An entry in this table is automatically created when an E_port becomes non-isolated and there is a entry in dmTable for that VSAN. An entry is deleted automatically from this tabl ...

dmIfEntry

An entry gives information on interface configuration on a particular VSAN.

dmIfRcfReject

This object determines if the incoming ReConfigure Fabric (RCF) messages on this interface on this vsan is accepted or not. If this object is 'true', then the incoming RCF is rejected. If 'false', incoming RCF is accepted. Note that this object does not a ...

dmIfRole

The role of this interface.

dmIfRowStatus

The status of this row. This object can be used to create an entry only if the corresponding interface exists. If the interface does not exists, a create will fail.

dmAreaTable

This table contains area statistics on this domain manager per VSAN. Each octet in the dmAssignedAreaList can be used to index this table to find information on each area.

dmAreaEntry

An entry gives information on the Area ID and all Port IDs that were assigned for within an area for a particular VSAN.

dmAreaAreaId

The Area ID of this area.

dmAreaAssignedPortIdList

The list of Port IDs which have been assigned in this Area and VSAN, formatted as an array of octets in ascending order. There could be zero or more Port IDs assigned on this Area and VSAN. Port ID is an 8-bit value. And therefore, each octet represents o ...

dmDatabaseTable

This table contains all information known by the local switch about all the domains which have been assigned in each of the VSANs.

dmDatabaseEntry

An entry (conceptual row) in the dmDatabaseTable containing information about one Domain ID in one VSAN.

dmDatabaseDomainId

The Domain ID for which this row contains information.

dmDatabaseSwitchWwn

The WWN of the switch to which the corresponding value of dmDatabaseDomainId is currently assigned for the particular VSAN.

dmMaxFcIdCacheSize

The maximum number of FC IDs that can be cached in the dmFcIdCacheTable.

dmFcIdCacheTable

This table contains all the FC IDs that have recently been released. So it lists all the FC IDs that have valid WWN to FC ID mappings and currently not assigned to any ports. These FC ID were assigned to ports and now, have been released. This cached FC ...

dmFcIdCacheEntry

An entry (conceptual row) in the dmFcIdCacheTable containing information about one FC ID that was released from a WWN, corresponding to a range of one or more ports. An entry is created when a FC ID is released by the last port in the range. An entry is d ...

dmFcIdCacheWwn

The WWN of the port associated this entry.

dmFcIdCacheAreaIdPortId

The Area ID and Port ID of FC ID that was assigned and has since been released by this port on this VSAN. Note that this object is only 2 bytes and only contains the Area ID and Port ID.

dmFcIdCachePortIds

Number of port IDs assigned and/or released starting from Port ID contained in the second byte of dmFcIdCacheAreaIdPortId for the Area ID contained in the first byte of object dmFcIdCacheAreaIdPortId.

dmReConfFabricChangeNotifyEnable

Specifies whether or not the local switch should issue a dmFabricChangeNotify notification on sending or receiving ReConfigureFabric (RCF) on a VSAN. If the value of the object is 'true, then the notification is generated. If the value is 'false', notific ...

dmFcIdPersistencyTable

This table lists the FC IDs which are in the FC ID persistency database. The FC ID persistency is a feature which enables FC devices to get same FC IDs even if they disappear and appear back, if enabled. The FC ID persistency database contains information ...

dmFcIdPersistencyWwn

This is either the port WWN of the FC device if the local port is a F_port or WWN of the local port if the local port is a FL_port. The local port is the port on the local device to which the FC device is attached.

dmFcIdPersistencyFcId

The FC ID assigned for this WWN on this VSAN. The third octet of this object must be '0x00' if value of dmFcIdPersistencyNum is 'area'. This object cannot be changed if either the value of dmFcIdPersistencyUsed is 'true' or if the new value being set is a ...

dmFcIdPersistencyNum

The number of FC IDs starting from 'dmFcIdPersistencyFcId' which are assigned either statically or dynamically for this WWN on this VSAN. The value 'one' means just one FC ID is assigned. The value 'area' means all the FC IDs in the area that is specifie ...

dmFcIdPersistencyUsed

This object indicates if this FC ID is used or not.

dmFcIdPersistencyType

The type of persistency of this FC ID.

dmFcIdPersistencyRowStatus

Status of this row. An entry cannot be created until following object is instantiated : - dmFcIdPersistencyFcId - dmFcIdPersistencyNum Note that an entry cannot be deleted if the corresponding dmFcIdPersistencyUsed is 'true'.

dmAllowedDomainIDListTable

This table contains list of allowed domain IDs in the local VSANs. So in a VSAN, domain IDs can be assigned only from the allowed list. All the domain IDs which are not allowed are reserved. Note that this is possible in a VSAN only if the local device is ...

dmAllowedDomainIDListEntry

An entry (conceptual row) in this table. Each entry represents an domain ID list allowed in a VSAN.

dmAllowedDomainIDListId

The identifier of the domain ID list.

dmAllowedDomainIDList

This object provides the lists of domains that are allowed. Each octet within the value of the object specifies a set of domains. The first octet specifies domains 0 through 7. Similarly, the second octet specifies domain 8 through 15. Within each octet, ...

dmAllowedDomainIDListUser

The name of the entity using this domain ID list on this vsan.

dmGroup

A collection of objects for displaying and configuring Domain Manager membership.

dmDatabaseGroup

A collection of objects for displaying the Domain database information.

dmAreaGroup

A collection of objects for displaying the Domain area information.

dmCacheGroup

A collection of objects for displaying the Domain area information.

dmGroupRev1

A collection of objects for displaying and configuring Domain Manager membership.

dmFcIdPersistencyGroup

A collection of objects to support FC ID persistency.

dmDomainIDAllowedGroup

A collection of objects to support domain ID list feature.