Cisco DS1/E1 Call Config Table

1.3.6.1.4.1.9.9.229.1.1.2

The DS1 Configuration table for call related parameters. ::= { cds1Config 2 } SYNTAX Cds1CallConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION The entry in this table is for DS1/E1 interface which need call related configuraton. AUGMENTS { dsx1ConfigEntry } ::= { cds1CallConfigTable 1 } Cds1CallConfigEntry ::= SEQUENCE { cds1CallTrunkConditionEnable TruthValue } SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION This object specifies whether trunk-condition is enabled. The value 'true' means trunk-condition enable and the value 'false' means trunk-condition disable. If this object is set to 'true', gateway will apply trunk conditioning on the DS0's of this DS1 interface that are in alarm. Trunk Conditioning - gateway will transmit idle code pattern for the first 2.5 secs and then transmit seized code, both idle code and seized code are specified by the 'ds0IdleCode' and 'ds0SeizedCode' MIB objects in the CISCO-CAS-IF-EXT-MIB. This object is applicable for trunking applications only. DEFVAL { false } ::= { cds1CallConfigEntry 1 } -- -------------------------------------------------------------- -- -- DS1 Current 15 minute table -- -- -------------------------------------------------------------- SYNTAX SEQUENCE OF Cds1CurrentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION The DS1 current table contains various statistics being collected for the current 15 minute interval.