CISCO-DS1-EXT-MIB

CISCO-DS1-EXT-MIB Download

MIBs list

The MIB module to describe DS1/E1 interface objects. This is an extension to the standard DS1/E1 MIB (RFC 2495).

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-DS1-EXT-MIB

cds1ConfigTable
The DS1 Configuration table. This table has objects for configuring DS1 interfaces.
cds1ConfigEntry
An entry in the table. There is an entry for each available DS1/E1 interface identified by ifType value of ds1(18). By default, interfaces are disabled.
cds1LineType
This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The ...
cds1LoopbackCodeDetection
This object is used to enable or disable the detection of far end loop back requests (inband or out-of-band (ESF)). The loopback detection is enabled by setting this object to 'true' and loopback detection is disabled by setting this object to 'false'. Th ...
cds1Repetition
This object is used to repeatedly apply the writable objects of dsx1ConfigTable and cds1ConfigTable specified in the same SNMP PDU starting from the row indicated by the index of the instance for the number of rows specified in this object. The order of o ...
cds1RepetitionOwner
This object is used for error checking of the operation specified in cds1Repetition. The value of this object is set by the SNMP manager for its own identifier at the same time as issuing the bulk operation by setting cds1Repetition. Later on, the SNMP ma ...
cds1RepetitionResult
This object is used for error checking of the operation specified in cds1Repetition. This object indicates the result of bulk configuraton initiated by the SNMP manager specified in the value of cds1RepetitionOwner.
cds1CallConfigTable
The DS1 Configuration table for call related parameters. ::= { cds1Config 2 } SYNTAX Cds1CallConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION The entry in this table is for DS1/E1 interface which need call related configuraton. AUG ...
cds1CurrentEntry
An entry in the DS1 current table. An entry in this table is automatically created when a line activated.
cds1CurrentLSESs
The number of LSES (Line Severely Errored Seconds) encountered by the interface.
cds1CurrentPSASs
The number of Path SEF/AIS (PSAS) encountered by the ds1 interface.
cds1IntervalTable
The DS1 interval table contains various statistics collected by each DS1 interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (identified ...
cds1IntervalEntry
An entry in the DS1 interval table.
cds1IntervalLSESs
The number of LSES (Line Severely Errored Seconds) encountered by the interface.
cds1IntervalPSASs
The number of PSAS encountered by the interface.
cds1TotalTable
The DS1 Total Table contains the cumulative sum of the various statistics collected for the 96 fifteen minutes intervals preceding the current interval.
cds1TotalEntry
An entry in the DS1 Total table.
cds1TotalLSESs
The sum of Line Severely Errored Seconds (LSES) encountered by a DS1 interface in the previous 96 fifteen minutes intervals.
cds1TotalPSASs
The sum of Path SEF/AIS (PSAS) encountered by a DS1 interface in the previous 96 fifteen minutes intervals
cds1FarEndCurrentTable
The DS1 Far End Current Table contains various statistics collected for the current 15 minute interval. The statistics are collected from the far end messages on the Facilities Data Link (FDL).
cds1FarEndCurrentEntry
An entry in the cds1FarEndCurrentTable.
cds1FarEndCurrentLOFCs
The number of Loss Of Frame Counts in the current 15 minute interval.
cds1FarEndIntervalTable
The DS1 Far End Interval Table contains various statistics collected by each DS1 interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (i ...
cds1FarEndIntervalEntry
An entry in the DS1 Far End Interval table.
cds1FarEndIntervalLOFCs
The number of Loss Of Frame Counts encountered by the interface.
cds1FarEndTotalTable
The DS1 Far End Total Table contains the cumulative sum of the various statistics for the 96 fifteen minutes intervals preceding the current interval.
cds1FarEndTotalEntry
An entry in the DS1 Far End Total table.
cds1FarEndTotalLOFCs
The number of Loss Of Frame Counts encountered by the interface in the previous 96 fifteen minutes interval.
cds1AlarmThresholdGroupTable
The DS1 alarm threshold configuration table. This table contains the objects associated with threshold values for different statistics. The thresholds may be configured for: BES - Bursty Errored Seconds CSS - Controlled Slip Seconds DM - Degraded Minu ...
cds1AlarmThresholdGroupIndex
An unique value identifying an entry in cds1AlarmThresholdGroupTable.
cds1Current15MinBESsThreshold
This object identifies 15 minute threshold for BES.
cds1Current24HrBESsThreshold
This object identifies 24 hour threshold for BES.
cds1Current15MinCSSsThreshold
This object identifies 15 minute threshold for CSS.
cds1Current24HrCSSsThreshold
This object identifies 24 hour threshold for CSS.
cds1Current15MinDMsThreshold
This object identifies 15 minute threshold for DM.
cds1Current24HrDMsThreshold
This object identifies 24 hour threshold for DM.
cds1Current15MinESsThreshold
This object identifies 15 minute threshold for ES.
cds1Current24HrESsThreshold
This object identifies 24 hour threshold for ES.
cds1Current15MinLCVsThreshold
This object identifies 15 minute threshold for LCV.
cds1Current24HrLCVsThreshold
This object identifies 24 hour threshold for LCV.
cds1Current15MinLESsThreshold
This object identifies 15 minute threshold for LES.
cds1Current24HrLESsThreshold
This object identifies 24 hour threshold for LES.
cds1Current15MinLSESsThreshold
This object identifies 15 minute threshold for LSES.
cds1Current24HrLSESsThreshold
This object identifies 24 hour threshold for LSES.
cds1Current15MinPCVsThreshold
This object identifies 15 minute threshold for PCV.
cds1Current24HrPCVsThreshold
This object identifies 24 hour threshold for PCV.
cds1Current15MinPSASsThreshold
This object identifies 15 minute threshold for PSAS.
cds1Current24HrPSASsThreshold
This object identifies 24 hour threshold for PSAS.
cds1Current15MinSESsThreshold
This object identifies 15 minute threshold for SES.
cds1Current24HrSESsThreshold
This object identifies 24 hour threshold for SES.
cds1Current15MinSEFSsThreshold
This object identifies 15 minute threshold for SEFS.
cds1Current24HrSEFSsThreshold
This object identifies 24 hour threshold for SEFS.
cds1Current15MinUASsThreshold
This object identifies 15 minute threshold for UAS.
cds1Current24HrUASsThreshold
This object identifies 24 hour threshold for UAS.
cds1AlarmThresholdGroupRowStatus
The status of this conceptual row. This object is used for creating, modifying and deleting entries from cds1AlarmThresholdGroupTable. To create a row in this table, a manager must set this object to 'createAndGo(4)'. An entry can be deleted by setting t ...
cds1AlarmConfigTable
The DS1 alarm configuration table. This table contains the objects associated with detecting and declaring alarms for the DS1/E1 interfaces. ::= { cds1Alarm 2 } SYNTAX Cds1AlarmConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION Alarm ...
cds1StatisticalAlarmSeverity
This variable is used to setup the severity of any of the Statistical alarms. So when a Statistical Counter exceeds its specified threshold, the system will send the alarm with appropriate severity. A value of none(3) indicates that no alarm will be raise ...
cds1StatisticalAlarmState
This is a bitmap of the DS1 Line Statistical alarms. A clear bitmap (i.e. no bit is set) will indicate that no alarms are present. The values of individual bits mean: cds1BES15Min BES current 15 minute threshold exceeded cds1BES24Hr BES 24 hour threshold ...
cds1AlarmUpCount
This parameter specifies the increment to the Near End alarm integration counters. The local alarms are LOS and LOF. The integration counter is incremented by this value every 100 ms while the alarm persists. When the integration counter exceeds 'cds1Alar ...
cds1AlarmDownCount
This parameter specifies the decrement to the Near End alarm integration counters. The alarms are LOS and LOF. The integration counter is decremented by this value every 100 ms while no alarm persists. The counter does not decrement below zero. When the ...
cds1AlarmThreshold
The value set in this object determines the value that the alarm integration counter must reach for an near end alarm to be declared. If the up count is 6, and the threshold 150, an Alarm is integrated in 2.5 seconds. If the down count is 1, then alarm wi ...
cds1AlarmThresholdActiveGroup
The value of this object identifies the row in the cds1AlarmThresholdGroupTable which contains the threshold values for different statistics, and is currently active.
cds1Current24HrStatsTable
The DS1 24 hour Statistics table. A 24 hour interval starts at twelve mid-night with reference to node time. In case of a manual change in node time all the counters in this table get reset to 0.
cds1Current24HrStatsEntry
An entry in the DS1 current 24 hour table. An entry is created automatically for each DS1 interface that is activated. ifEntries with ifType=ds1(18) will have an entry in this table.
cds1Current24HrESs
Number of ESs encountered in current 24 hour interval.
cds1Current24HrSESs
Number of SESs encountered in current 24 hour interval.
cds1Current24HrSEFSs
Number of SEFSs encountered in current 24 hour interval.
cds1Current24HrUASs
Number of UASs encountered in current 24 hour interval.
cds1Current24HrCSSs
Number of CSSs encountered in current 24 hour interval.
cds1Current24HrPCVs
Number of PCVs encountered in current 24 hour interval.
cds1Current24HrLESs
Number of LESs encountered in current 24 hour interval.
cds1Current24HrBESs
Number of BESs encountered in current 24 hour interval.
cds1Current24HrDMs
Number of DMs encountered in current 24 hour interval.
cds1Current24HrLCVs
Number of LCVs encountered in current 24 hour interval.
cds1Previous24HrStatsTable
Contains DS1 previous 24 hour Statistics table. A 24 hour interval starts at twelve midnight with reference to node time.
cds1Previous24HrStatsEntry
An entry in DS1 previous 24 hour table. ifEntries with ifType=ds1(18) will have an entry in this table.
cds1Previous24HrESs
Number of ESs encountered in previous 24 hour interval.
cds1Previous24HrSESs
Number of SESs encountered in previous 24 hour interval.
cds1Previous24HrSEFSs
Number of SEFSs encountered in previous 24 hour interval.
cds1Previous24HrUASs
Number of UASs encountered in previous 24 hour interval.
cds1Previous24HrCSSs
Number of CSSs encountered in previous 24 hour interval.
cds1Previous24HrPCVs
Number of PCVs encountered in previous 24 hour interval.
cds1Previous24HrLESs
Number of LESs encountered in previous 24 hour interval.
cds1Previous24HrBESs
Number of BESs encountered in previous 24 hour interval.
cds1Previous24HrDMs
Number of DMs encountered in previous 24 hour interval.
cds1Previous24HrLCVs
Number of LCVs encountered in previous 24 hour interval.
cds1Previous24HrLSESs
Number of LSESs encountered in previous 24 hour interval.
cds1ErrStatsTable
The DS1 error statistics table. This table contains the statistics since the systems was up or last re-initialized.
cds1ErrStatsEntry
An entry in the DS1 Error Stats Table. ifEntries with ifType=ds1(18) will have an entry in this table.
cds1LOSCounts
The number of times the Loss Of Signal defect was detected with or without integrating to LOS alarm.
cds1OOFCounts
The number of times the Out of Frame (OOF) was detected with or without integrating to OOF alarm.
cds1RAICounts
The number of times Yellow Alarms was detected with or without integrating to RAI alarm.
cds1FECounts
The number of Framing Pattern Errors encountered by the DS1 interface.
ciscoDs1ConfMIBGroup
Collection of DS1/E1 interface related configuration parameters.
ciscoDs1CurrentMIBGroup
A collection of objects providing statistics information for current 15 minute.
ciscoDs1IntervalMIBGroup
A collection of objects providing statistics information for each DS1 interface over the previous 24 hour of operation.
ciscoDs1TotalMIBGroup
A collection of objects providing statistics information applicable to all DS1 interfaces for the 24 hour period preceding the current interval.
ciscoDs1FarEndStatsMIBGroup
A collection of objects providing statistics information for the remote end.
ciscoDs1AlarmConfigGroup
Statistical alarm configuration group for 15 Minute thresholds.
ciscoDs1Alarm15MinThreshGroup
Threshold configuration group for stats collected in 15 minute intervals.
ciscoDs1Alarm24HrThreshGroup
Threshold configuration group for stats collected in 24 minute intervals.
ciscoDs1Current24HrMIBGroup
Group of current 24 hour performance counters.
ciscoDs1Previous24HrMIBGroup
A collection of objects providing statistics for previous 24 hour.
ciscoDs1StatsMIBGroup
A collection of objects related to DS1 statistics.
ciscoDs1BulkConfGroup
Bulk provisioning parameters for DS1/E1 interface.
ciscoDs1AlarmThreshGroup
The common group for DS1 alarm threshold configuration. Note: If this group is supported, at least one of ciscoDs1Alarm15MinThreshGroupRev1 and ciscoDs1Alarm24HrThreshGroupRev1 should be supported.
ciscoDs1Alarm15MinThreshGroupRev1
Threshold configuration group for stats collected in 15 minute intervals.
ciscoDs1Alarm24HrThreshGroupRev1
Threshold configuration group for stats collected in 24 minute intervals.
ciscoDs1CallGroup
Call related parameters for DS1/E1 interface.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list