dsx3NEAlarmDownCount - dsx3 NE Alarm Down Count - CISCO-MGX82XX-DSX3-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

dsx3NEAlarmDownCount

dsx3 NE Alarm Down Count
1.3.6.1.4.1.351.110.4.4.1.2.1.1.4

This parameter specifies the decrement to the Near End alarm integration counters. The local alarms are LOS and LOF. The Default value is 1 and the integration counter is decremented by this value every 10 ms while no alarm persists. The counter is incremented by the value of dsx3NEAlarmUpCount while there is no alarm (the counter does not decrement below zero). When the integration counter reaches zero any Alarm previously declared is removed. LOF detection is not applicable for CESM-T3/E3

Back to CISCO-MGX82XX-DSX3-MIB MIB page.

IPHost Network monitor allows you to monitor dsx3NEAlarmDownCount on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco switches right now.

Easy monitoring of dsx3NEAlarmDownCount with IPHost tools

MIBs list