dsx3 Plcp Line Alarm State

1.3.6.1.4.1.351.110.4.4.2.3.1.1.1

This variable is a bitmap of the DSX3 Line alarms. A value of zero indicates no alarms. Itemized below are the individual bits: BitPosition Alarm ----------- ----- 0 Receiving RAI 1 Transmitting RAI 2 Receiving OOF 3 Receiving LSS Link Up 4 Transmitting LSS Link Up 5 Receiving LSS Link Down 6 Transmitting LSS Link Down 7 Near End Local Loopback in effect 8 Near End Remote Loopback in effect ::= { dsx3PlcpAlarmEntry 1 } SYNTAX Integer32(0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION This variable is a bitmap of the DSX3 Line Statictical Alarms on the card. A value of zero indicates no alarms. Itemized below are the individual alarm bits: BitPosition Alarm ----------- ----- 0 Bip8CV 15 minute threshold exceeded 1 Bip8CV 24 hour threshold exceeded 2 Bip8ES 15 minute threshold exceeded 3 Bip8ES 24 hour threshold exceeded 4 Bip8SES 15 minute threshold exceeded 5 Bip8SES 24 hour threshold exceeded 6 Plcp SEFS 15 minute threshold exceeded 7 Plcp SEFS 24 hour threshold exceeded 8 Plcp UAS 15 minute threshold exceeded 9 Plcp UAS 24 hour threshold exceeded ::= { dsx3PlcpAlarmEntry 2 } SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION This counter counts the number of BIP-8 code violations encountered by the interface.