dsx3 Red Severity

1.3.6.1.4.1.351.110.4.4.1.2.1.1.1

This variable is used to setup the severity of RED alarm. So when LOS/LOF alarm is detected the card will send the alarm with appropriate severity status. A major alarm will cause audible notification and the MAJOR ALARM LED will be turned ON. A minor alarm will just turn on the MINOR ALARM LED. LOF detection is not applicable for CESM-8T3/E3. ::= { dsx3AlarmConfigEntry 1 } SYNTAX INTEGER { minor(1), major(2) } MAX-ACCESS read-write STATUS current DESCRIPTION This variable is used to setup the severity of RAI alarm. So when RAI alarm is detected the card will send the alarm with appropriate severity status. A major alarm will cause the audible notification and the MAJOR ALARM LED will be turned ON. A minor alarm will just turn on the MINOR ALARM LED. This is not applicable for CESM-T3/E3. ::= { dsx3AlarmConfigEntry 2 } SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION This parameter specifies the increment to the Near End alarm integration counters. The local alarms are LOS and LOF. The Default value is 6 and the integration counter is incremented by this value every 10 ms while the alarm persists. The counter is decremented by the value of dsx3NEAlarmDnCount while there is no alarm (the counter does not decrement below zero). When the integration counter exceeds dsx3NEAlarmThreshold an Alarm of the severity specified for the particular NE alarm is declared. LOF detection is not applicable for CESM-T3/E3