With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.
csrstIPAddressType
csrst IP Address Type
1.3.6.1.4.1.9.9.441.1.2.3
Internet address type governing the address type format for one or more InetAddress objects in this MIB. The associated InetAddress objects' description will refer back to this type object as appropriate. ::= { csrstConf 3 } SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION Cisco SRST IP address for the router to receive messages from IP phones, typically one of the addresses of an Ethernet port of the router. The type of IP address used here is indicated by the csrstSysIPAddressType object. ::= { csrstConf 4 } SYNTAX InetPortNumber(2000..9999) MAX-ACCESS read-only STATUS current DESCRIPTION This object indicates the TCP port number to use for Skinny Client Control Protocol (SCCP) and is range limited. This port also indicates through which IP phones communicate with SRST. DEFVAL { 2000 } ::= { csrstConf 5 } SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION Maximum number of simultaneous three-party conference calls configured on the router. Range is IOS version and platform dependent. With SRST Version 3.0 onwards, the following are the maximum values for each platform - Cisco 1751, Cisco 1760, Cisco 2600, Cisco 3640 - 8 conferences. Cisco 3660, Cisco 3725, Cisco 3745 - 16 conferences. Default is half the maximum number of simultaneous three-party conferences for each platform.
Back to CISCO-SRST-MIB MIB page.
IPHost Network monitor allows you to monitor csrstIPAddressType on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco firewalls right now.