cva If FXO Cfg Signal Type

1.3.6.1.4.1.9.9.62.1.3.1.1.1

the signaling type of FXO interface. fxoLoopStart - loop start. fxoGroundStart - ground start. fxoCama - cama. DEFVAL { fxoLoopStart } ::= { cvaIfFXOCfgEntry 1 } SYNTAX Integer32 (1..10) UNITS "rings The number of rings detected before closing loop. DEFVAL { 1 } ::= { cvaIfFXOCfgEntry 2 } SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated -- superceded by cvaIfFXOCfgSupDisconnect2 DESCRIPTION Specifies whether a supervisory disconnect signal (CPC) will be presented to the interface when the connected party at the interface hangs up. DEFVAL { true } ::= { cvaIfFXOCfgEntry 3 } SYNTAX InterfaceDialType MAX-ACCESS read-write STATUS current DESCRIPTION Specifies the out dialing type of FXO interface. DEFVAL { dtmf } ::= { cvaIfFXOCfgEntry 4 } SYNTAX INTEGER { signal(0), anytone(1), dualtoneMidcall(2), dualtonePreconnect(3) } MAX-ACCESS read-write STATUS current DESCRIPTION Specifies the type of supervisory disconnect signal (CPC) to be presented to the interface when the connected party at the interface hangs up. signal - power denial recognition anytone - tone detection of all call progressing tones dualtoneMidcall - tone detection to operate throughout the call duration dualtonePreconnect - tone detection to operate only during call setup DEFVAL { signal } ::= { cvaIfFXOCfgEntry 5 } --**************************************************************************** -- The Foreign Exchange Office (FXO) interface Status Table --**************************************************************************** SYNTAX SEQUENCE OF CvaIfFXOStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION The Foreign Exchange Office (FXO) interface Status Table. It contains hook status, ring detection and other states of the interface. ::= { cvaIfFXOObjects 2 } SYNTAX CvaIfFXOStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry in the status table for each FXO interface. AUGMENTS { cvaIfFXOCfgEntry } ::= { cvaIfFXOStatusTable 1 } CvaIfFXOStatusEntry ::= SEQUENCE { cvaIfFXOHookStatus INTEGER, cvaIfFXORingDetect TruthValue, cvaIfFXORingGround TruthValue, cvaIfFXOTipGround TruthValue } SYNTAX INTEGER { onHook (1), offHook (2), trunked (3) } MAX-ACCESS read-only STATUS current DESCRIPTION This object contains the hook status of FXO interface. onHook - Present the onHook to the connected equipment. offHook - Present the offHook to the connected equipment. trunked - Present the trunk to the connected equipment. ::= { cvaIfFXOStatusEntry 1 } SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION This object contains the ring detect indication. If the value is true, then the interface detects ring from PBX or CO; otherwise, it doesn't.