CISCO-VOICE-ANALOG-IF-MIB Download
Analog Voice Interface MIB module.
This MIB manages the E&M, FXO, FXS
Interfaces in the router.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-VOICE-ANALOG-IF-MIB
- cvaIfCfgTable
- The Analog Voice Standard Configuration Table. It contains the standard configuration information of the analog telephony interface. ::= { cvaIfGeneralObjects 1 } SYNTAX CvaIfCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entr ...
- cvaIfEMCfgTable
- The E&M standard configuration table. It contains the current setting of E&M configurable parameters. ::= { cvaIfEMObjects 1 } SYNTAX CvaIfEMCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry in the standard configuration ta ...
- cvaIfEMCfgSignalType
- The signaling type of E&M tie trunk interface. winkStart - the calling side seizes the line by going off-hook on its E lead but waits for a short off-hook 'wink' indication on its M lead from the called side before sending address information as DTMF digi ...
- cvaIfEMTimingDigitDuration
- Outgoing DTMF digit duration in milliseconds. DEFVAL { 100 } ::= { cvaIfEMTimingEntry 1 } SYNTAX Integer32 (50..500) UNITS "milliseconds Outgoing DTMF inter-digit duration in milliseconds. DEFVAL { 100 } ::= { cvaIfEMTimingEntry 2 } SYNTAX In ...
- cvaIfFXOCfgSignalType
- the signaling type of FXO interface. fxoLoopStart - loop start. fxoGroundStart - ground start. fxoCama - cama. DEFVAL { fxoLoopStart } ::= { cvaIfFXOCfgEntry 1 } SYNTAX Integer32 (1..10) UNITS "rings The number of rings detected before c ...
- cvaIfFXORingGround
- This object contains the incoming ring ground indication. It is only valid when the cvaIfFXOCfgSignalType is fxoGroundStart. If the object is true, then the interface is presenting a ring ground to the connected equipment; otherwise, it doesn't. ::= { cva ...
- cvaIfFXOTimingDigitDuration
- Outgoing DTMF digit duration in milliseconds. DEFVAL { 100 } ::= { cvaIfFXOTimingEntry 1 } SYNTAX Integer32 (50..500) UNITS "milliseconds Outgoing DTMF inter-digit duration in milliseconds. DEFVAL { 100 } ::= { cvaIfFXOTimingEntry 2 } SYNTAX ...
- cvaIfFXSCfgSignalType
- the signaling type of FXS interface. fxsLoopStart - loop start. fxsGroundStart - ground start. DEFVAL { fxsLoopStart } ::= { cvaIfFXSCfgEntry 1 } SYNTAX INTEGER { ringFrequency25 (1), ringFrequency50 (2), ringFrequency20 (3), ringFrequency30 (4) } ...
- cvaIfFXSTimingDigitDuration
- Outgoing DTMF digit duration in milliseconds. DEFVAL { 100 } ::= { cvaIfFXSTimingEntry 1 } SYNTAX Integer32 (50..500) UNITS "milliseconds Outgoing DTMF inter-digit duration in milliseconds. DEFVAL { 100 } ::= { cvaIfFXSTimingEntry 2 } --********* ...
- cvaIfGeneralGroup
- The collection of objects providing general information about the Cisco Analog Voice interfaces.
- cvaIfEMGroup
- The collection of objects providing information about the Cisco E&M trunk interface.
- cvaIfFXOGroup
- The collection of objects providing information about the Cisco FXO interface.
- cvaIfFXSGroup
- The collection of objects providing information about the Cisco FXS interface.
- cvaIfFXOGroup2
- The collection of objects providing information about the Cisco FXO interface.
- cvaIfEMGroupRev1
- The collection of objects providing information about the Cisco E&M trunk interface.
- cvaIfEMGroupRev2
- The collection of objects providing information about the Cisco E&M trunk interface.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
