cva If FXO Timing Digit Duration

1.3.6.1.4.1.9.9.62.1.3.3.1.1

Outgoing DTMF digit duration in milliseconds. DEFVAL { 100 } ::= { cvaIfFXOTimingEntry 1 } SYNTAX Integer32 (50..500) UNITS "milliseconds Outgoing DTMF inter-digit duration in milliseconds. DEFVAL { 100 } ::= { cvaIfFXOTimingEntry 2 } SYNTAX Integer32 (10..20) UNITS "pulses per second Outgoing pulse dialing rate in pulses per second (pps). DEFVAL { 10 } ::= { cvaIfFXOTimingEntry 3 } SYNTAX Integer32 (100..1000) UNITS "milliseconds Outgoing pulse dialing inter-digit timing in milliseconds. DEFVAL { 500 } ::= { cvaIfFXOTimingEntry 4 } --**************************************************************************** -- The Foreign Exchange Station (FXS) Standard Configuration Table --**************************************************************************** -- This table is used to configure the FXS signaling type, Ring frequency SYNTAX SEQUENCE OF CvaIfFXSCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION The FXS standard configuration table. It contains FXS configuration parameters, one entry per FXS interface. The configuration information of this table is set by hardware with its default setting or CLI during the hardware installation time. ::= { cvaIfFXSObjects 1 } SYNTAX CvaIfFXSCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry in the standard configuration table for each FXS interface.