lp Eng Arc Ov Total Connection Pool Capacity

This attribute specifies the maximum number of connections (VCC, VPC, and VPT) that can be enabled on this FP. A standard Vpt uses 3 connections and a basic Vpt uses 2. If the LogicalProcessor is associated with a card of a cardType other than one of the following: 3pE3Atm, 3pDS3Atm, 3pOC3MmAtm, 3pOC3SmAtm, 3pE1Atm, 3pDS1Atm, 2pJ6MAtm; the value of the attribute restricts the sum of the (maxVccs + maxVpcs + (maxVpts * 3)) across all AtmIfs bound to this LogicalProcessor. If the LogicalProcessor is associated with a card of one of the following cardTypes: 3pE3Atm, 3pDS3Atm, 3pOC3MmAtm, 3pOC3SmAtm, 3pE1Atm, 3pDS1Atm, 2pJ6MAtm; the number of available connections are distributed equally across the ports on the FP. The number of connections associated to a particular port limits the size of the Vcc space which can be defined by the ConnMap of the AtmIf linked to the port. If the ConnMap component does not exist, its default settings are used for this check. Furthermore, the value of this attribute is restricted based on the number of ports on the card. For one port cards, the minimum is 512, the maximum is 4096 and the value must be divisible by 256. For two port cards, the minimum is 1024, the maximum is 8192 and the value must be divisible by 512. For three port cards, the minimum is 1536, the maximum is 7680 and the value must be divisible by 768. If the LogicalProcessor is associated with a card of one of the following cardTypes: 8pE1Atm, 8pDS1Atm, the maximum value for this attribute is 10752. For SGAF cards, the Connmap attributes are set to their default values. Increasing the value of this attribute reduces the memory available for cell and frame memory. This attribute must be set to 0 if the connectionPoolCapacity attribute of the Arc Ov component is set to non-zero values.