Nortel-Magellan-Passport-AtmBaseMIB Download

The module describing the Nortel Magellan Passport AtmBase Enterprise MIB.

IPHost Network Monitor offer an easy way of SNMP monitoring your Nortel network devices, Firewalls, Repeaters.

OID list for Nortel-Magellan-Passport-AtmBaseMIB

lpArcRowStatusTable: This entry controls the addition and deletion of lpArc components.
lpArcRowStatusEntry: A single entry in the table represents a single lpArc component.
lpArcRowStatus: This variable is used as the basis for SNMP naming of lpArc components. These components can be added and deleted.
lpArcComponentName: This variable provides the component's string name for use with the ASCII Console Interface
lpArcStorageType: This variable represents the storage type value for the lpArc tables.
lpArcIndex: This variable represents the index for the lpArc tables.
lpArcProvTable: This group specifies the configuration of processor-wide ATM- specific resources on a Logical Processor running ATM services. Note that altering any of these parameters results in a card reset.
lpArcProvEntry: An entry in the lpArcProvTable.
lpArcTotalConnectionPoolCapacity: This attribute is migrated to the Lp/n Eng Arc Ov attribute of the same name. This attribute specifies the maximum number of connections (both VCC and VPC) that can be enabled on the LogicalProcessor. If the LogicalProcessor is associated with a card of a ...
lpArcMulticastBranchesCapacity: This attribute is migrated to the Lp/n Eng Arc Ov attribute of the same name. This attribute specifies the number of multicast branches that can be enabled on the Logical Processor. A multicast branch is used for cell replication on a Vcc connection whose ...
lpArcTxFrameMemoryAllocation: This attribute is migrated to the Lp/n Eng Arc Ov attribute txCellMemoryAllocation. It is converted from frame percentage to cell percentage by subtracting this value from 100. This attribute specifies the percentage of the transmit CQM memory which shoul ...
lpArcRxFrameMemoryAllocation: This attribute is migrated to the Lp/n Eng Arc Ov attribute rxCellMemoryAllocation. It is converted from frame percentage to cell percentage by subtracting this value from 100. This attribute specifies the percentage of the receive CQM memory which should ...
lpArcPerVcQueueInterfaces: This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute of the same name. This attribute specifies the number of independent ports or IMA components which support shaping and per-VC queueing on the LogicalProcessor. When this attribute is not zero ...
lpArcShapingStackAllocation: This attribute is migrated to the perVcQueueInterfaces attribute of the Lp/n Eng Arc Cqc Ov. Value ~0,~1,~2 is migrated to the value 0; value 0,~1,~2 is migrated to value 1; value 0,1,~2 is migrated to the value 2 and value 0,1,2 is migrated to the value ...
lpArcShapingScalingFactor: This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute of the same name. This attribute specifies the scaling factor which is to be applied to all shaping rates for this ATM-FP. The scaling factor is a multiplicative factor which is applied to th ...
lpArcCdvAttenuation: This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute cdvReduction. This attribute enables the attenuation of the maximum Cell Delay Variation (CDV) of shaped transmit traffic. When the value of this attribute is set to off, the CDV value can be ...
lpArcPortAggregation: This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute portCongestionPolicy. This attribute specifies whether port aggregation is turned on or off for this ATM-FP. It applies only to transmit traffic served on the common queues and does not apply ...
lpArcSubConnectionPoolCapacity: This attribute is migrated to the Lp/n Eng Fcrc Ov attribute of the same name. This attribute specifies the maximum number of sub-connections for the LogicalProcessor. A sub-connection is used for interworking the ATM services with the frame oriented serv ...
lpArcLnnConnectionPoolCapacity: This attribute is migrated to the Lp/n Eng Fcrc Ov attribute of the same name. This attribute specifies the maximum number of resource records for the connections which utilize Logical Network Number (LNN) on the LogicalProcessor. A logical network is a s ...
lpArcConnCapTable: This attribute is migrated to the Lp/n Eng Arc Cqc Ov attribute of the same name. This attribute is provided for backward compatibility and can only be used if the LogicalProcessor is associated to a card of one of the following cardType: 3pE3Atm, 3pDS3At ...
lpArcConnCapEntry: An entry in the lpArcConnCapTable.
lpArcConnCapIndex: This variable represents the lpArcConnCapTable specific index for the lpArcConnCapTable.
lpArcConnCapValue: This variable represents an individual value for the lpArcConnCapTable.
lpAruRowStatusTable: This entry controls the addition and deletion of lpAru components.
lpAruRowStatusEntry: A single entry in the table represents a single lpAru component.
lpAruRowStatus: This variable is used as the basis for SNMP naming of lpAru components. These components cannot be added nor deleted.
lpAruComponentName: This variable provides the component's string name for use with the ASCII Console Interface
lpAruStorageType: This variable represents the storage type value for the lpAru tables.
lpAruIndex: This variable represents the index for the lpAru tables.
lpAruOperTable: This group describes the usage of ATM-specific resources on a Logical Processor running ATM services.
lpAruOperEntry: An entry in the lpAruOperTable.
lpAruTotalConnectionPoolUsage: If the LogicalProcessor is associated with a card of a cardType other than 4pE1Aal1 or 4pDS1Aal1, this attribute indicates the total number of enabled VCCs and VPCs in AtmIfs associated with this LogicalProcessor. An example of a VCC not in the enabled st ...
lpAruMulticastBranchesUsage: This attribute indicates the total number of multicast branches that are active on the Logical Processor.
lpAruTxCellBlockCapacity: This attribute indicates the amount of memory reserved for storing ATM cells to be transmitted by the Lp.
lpAruTxCellBlockUsage: This attribute indicates the amount of memory currently being used to store ATM cells to be transmitted by the Lp.
lpAruTxCellFreeListSize: This attribute indicates the current size of the transmit cell free list. The transmit cell free list is the memory available for storing ATM cells to be transmitted by the Lp.
lpAruTxCellFreeListCongestionState: This attribute indicates the congestion state of the transmit cell free list on this ATM-FP. The congestion state of a free list is indicated by a numeric value ranging from 0 to 3. When a free list is in a congested state x, only traffic with discard pri ...
lpAruTxFrameMemoryAllocation: This attribute defines the percentage of the transmit CQM memory which is allocated to the transmit frame free list on the ATM-FP. The remaining transmit CQM memory is allocated to the transmit cell free list. Frame memory is used for trunks, ATM Vcc test ...
lpAruTxFrameBlockCapacity: This attribute indicates the amount of memory reserved for storing frames to be transmitted by the Lp.
lpAruTxFrameBlockUsage: This attribute indicates the amount of memory currently being used to store frames to be transmitted by the Lp.
lpAruTxFrameFreeListSize: This attribute indicates the current size of the transmit frame free list. The transmit frame free list is the memory (in ATM cells) available for storing frames to be transmitted by the Lp.
lpAruTxFrameFreeListCongestionState: This attribute indicates the congestion state of the transmit frame free list on this ATM-FP. The congestion state of a free list is indicated by a numeric value ranging from 0 to 3. When a free list is in a congested state x, only traffic with discard pr ...
lpAruRxCellBlockCapacity: This attribute indicates the amount of memory reserved for storing ATM cells received by the Lp.
lpAruRxCellBlockUsage: This attribute indicates the amount of memory currently being used to store ATM cells received by the Lp.
lpAruRxCellFreeListSize: This attribute indicates the current size of the receive cell free list. The receive cell free list is the memory available for storing ATM cells received by the Lp.
lpAruRxCellFreeListCongestionState: This attribute indicates the congestion state of the receive cell free list on this ATM-FP. The congestion state of a free list is indicated by a numeric value ranging from 0 to 3. When a free list is in a congested state x, only traffic with discard prio ...
lpAruRxFrameMemoryAllocation: This attribute indicates the percentage of the receive CQM memory which is allocated to the receive frame free list on the ATM-FP. The remaining receive CQM memory is allocated to the receive cell free list. Frame memory is used for trunks, ATM Vcc testin ...
lpAruRxFrameBlockCapacity: This attribute indicates the amount of memory reserved for storing frames received by the Lp.
lpAruRxFrameBlockUsage: This attribute indicates the amount of memory currently being used to store frames received by the Lp.
lpAruRxFrameFreeListSize: This attribute indicates the current size of the receive frame free list. The receive frame free list is the memory (in ATM cells) available for storing frames received by the Lp.
lpAruRxFrameFreeListCongestionState: This attribute indicates the congestion state of the receive frame free list on this ATM-FP. The congestion state of a free list is indicated by a numeric value ranging from 0 to 3. When a free list is in a congested state x, only traffic with discard pri ...
lpAruSubConnectionPoolAvailable: This attribute indicates the number of sub-connections available for the LogicalProcessor. A sub-connection is used for interworking the ATM services with the frame oriented services such as Frame Relay, and Path Oriented Routing System (PORS). When a fra ...
lpAruSubConnectionPoolUsage: This attribute indicates the number of sub-connections being utilized for the LogicalProcessor. A sub-connection is used for interworking the ATM services with the frame oriented services such as Frame Relay, and Path Oriented Routing System (PORS). When ...
lpAruLnnConnectionPoolAvailable: This attribute indicates the number of resource records available for the connections which utilize Logical Network Number (LNN) on the LogicalProcessor. A logical network is a subset of passport modules together with a subset of trunks that interconnect ...
lpAruLnnConnectionPoolUsage: This attribute indicates the number of resource records being utilized for the connections which use Logical Network Number (LNN) on the LogicalProcessor. A logical network is a subset of passport modules together with a subset of trunks that interconnect ...
lpAruConnUsageTable: This attribute has been replaced by the set of AtmIf CA connectionPoolUsage attributes for AtmIf associated to independent links or IMA groups on this LogicalProcessor. The change better encapsulates the information associated with the AtmIf. This attribu ...
lpAruConnUsageEntry: An entry in the lpAruConnUsageTable.
lpAruConnUsageIndex: This variable represents the lpAruConnUsageTable specific index for the lpAruConnUsageTable.
lpAruConnUsageValue: This variable represents an individual value for the lpAruConnUsageTable.
lpAruTxCflThreshTable: This attribute indicates the maximum value of the txCellFreeListSize and the discard thresholds of the transmit cell free list. The transmit cell free list is the memory used for storing ATM cells to be transmitted by the Lp. The first value indicates the ...
lpAruTxCflThreshEntry: An entry in the lpAruTxCflThreshTable.
lpAruTxCflThreshIndex: This variable represents the lpAruTxCflThreshTable specific index for the lpAruTxCflThreshTable.
lpAruTxCflThreshValue: This variable represents an individual value for the lpAruTxCflThreshTable.
lpAruTxFflThreshTable: This attribute indicates the maximum txFrameFreeListSize and the discard thresholds of the transmit frame free list. The transmit frame free list is the memory (in units of ATM cells) used for storing frames to be transmitted by the Lp. The first paramete ...
lpAruTxFflThreshEntry: An entry in the lpAruTxFflThreshTable.
lpAruTxFflThreshIndex: This variable represents the lpAruTxFflThreshTable specific index for the lpAruTxFflThreshTable.
lpAruTxFflThreshValue: This variable represents an individual value for the lpAruTxFflThreshTable.
lpAruRxCflThreshTable: This attribute indicates the maximum value of the rxCellFreeListSize and the discard thresholds of the receive cell free list. The receive cell free list is the memory used for storing ATM cells to be received by the Lp. The first value indicates the maxi ...
lpAruRxCflThreshEntry: An entry in the lpAruRxCflThreshTable.
lpAruRxCflThreshIndex: This variable represents the lpAruRxCflThreshTable specific index for the lpAruRxCflThreshTable.
lpAruRxCflThreshValue: This variable represents an individual value for the lpAruRxCflThreshTable.
lpAruRxFflThreshTable: This attribute indicates the maximum rxFrameFreeListSize and the discard thresholds of the transmit frame free list. The receive frame free list is the memory (in units of ATM cells) used for storing frames to be received by the Lp. The first parameter in ...
lpAruRxFflThreshEntry: An entry in the lpAruRxFflThreshTable.
lpAruRxFflThreshIndex: This variable represents the lpAruRxFflThreshTable specific index for the lpAruRxFflThreshTable.
lpAruRxFflThreshValue: This variable represents an individual value for the lpAruRxFflThreshTable.
lpEngArcRowStatusTable: This entry controls the addition and deletion of lpEngArc components.
lpEngArcRowStatusEntry: A single entry in the table represents a single lpEngArc component.
lpEngArcRowStatus: This variable is used as the basis for SNMP naming of lpEngArc components. These components can be added and deleted.
lpEngArcComponentName: This variable provides the component's string name for use with the ASCII Console Interface
lpEngArcStorageType: This variable represents the storage type value for the lpEngArc tables.
lpEngArcIndex: This variable represents the index for the lpEngArc tables.
lpEngArcOperTable: This group describes the usage of ATM-specific resources on a Logical Processor running ATM services. The attributes listed represent Queue Controller resource usage for all ATM Cards (CQC for CQC based cards or PQC for SGAF cards).
lpEngArcOperEntry: An entry in the lpEngArcOperTable.
lpEngArcTotalConnectionPoolAvailable: This attribute indicates the number of connection resources available (VCC, VPC, and VPT) that can be used on this FP. A standard Vpt uses 3 connection resources and a basic Vpt uses 2.
lpEngArcTotalConnectionPoolUsage: This attribute indicates the number of connection resources (VCC, VPC, and VPT) in use on this FP. A standard Vpt uses 3 connection resources and a basic Vpt uses 2.
lpEngArcMulticastBranchesAvailable: This attribute indicates the total number of multicast branches that are available on this FP.
lpEngArcMulticastBranchesUsage: This attribute indicates the total number of multicast branches that are active on this FP.
lpEngArcTxCellMemoryAllocation: This attribute indicates the fraction of the transmit memory which is allocated for the transmission of cells on the FP. Cell memory is used for Atm Bearer Services, ATM SVCs and ATM PVCs. The remaining transmit memory is allocated for the transmission of ...
lpEngArcTxCellMemoryAvailable: This attribute indicates the current availability of the transmit cell memory. The transmit cell memory is the memory available for storing ATM cells to be transmitted by this FP.
lpEngArcTxCellMemoryMinAvailable: This attribute indicates the lowest availability of the transmit cell memory. The transmit cell memory is the memory available for storing ATM cells to be transmitted by this FP. This value is reset to the current availability every 15 minutes and when th ...
lpEngArcTxCellMemoryCongestionState: This attribute indicates the congestion state of the transmit cell memory for this FP. This attribute indicates which txCellMemoryThresholds corresponds to the current value of txCellMemoryUsage. The congestion state is used to determine if cells of a par ...
lpEngArcRxCellMemoryAllocation: This attribute indicates the fraction of the receive memory which is allocated for the reception of cells on the FP. Cell memory is used for Atm Bearer Services, ATM SVCS and ATM PVCS. The remaining receive memory is allocated to the reception of frame. ...
lpEngArcRxCellMemoryAvailable: This attribute indicates the current availability of the receive cell memory. The receive cell memory is the memory available for storing ATM cells to be transmitted by this FP.
lpEngArcRxCellMemoryMinAvailable: This attribute indicates the lowest availability of the receive cell memory. The receive cell memory is the memory available for storing ATM cells to be transmitted by this FP. This value is reset to the current availability every 15 minutes and when the ...
lpEngArcRxCellMemoryCongestionState: This attribute indicates the congestion state of the receive cell memory on this FP. This attribute indicates which rxCellMemoryThresholds corresponds to the current value of rxCellMemoryUsage. The congestion state is used to determine if cells of a parti ...
lpEngArcTxCellMemoryMaxUsage: This attribute indicates the maximum number which has recently occurred for the txCellMemoryUsage attribute. On CQC-based ATM FPs, this number indicates the maximum usage of transmit cells for all ports on this FP. On ATM IP FPs, this number indicates the ...
lpEngArcTxCellMemoryUsage: This attribute indicates the current number of transmit cells which are in use for this FP. On CQC-based ATM FPs, this number indicates the total transmit cells which are in use for all ports on this FP. On ATM IP FPs, this number indicates the number of ...
lpEngArcRxCellMemoryMaxUsage: This attribute indicates the maximum usage of receive cells for all ports on this FP. Receive cell memory is used for storing ATM cells received by this FP which are currently queued either for handling by the processor on this FP or queued for transmitti ...
lpEngArcRxCellMemoryUsage: This attribute indicates the current number of receive cells which are in use for all ports on this FP. Receive cell memory is used for storing ATM cells received by this FP which are currently queued either for handling by the processor on this FP or que ...
lpEngArcTxCellThreshTable: This attribute is a vector which indicates the size and three discard thresholds for transmit cell memory for this FP. The transmit cell memory is used for storing ATM cells to be transmitted by this FP. The first value indicates the transmit cell memory ...
lpEngArcTxCellThreshEntry: An entry in the lpEngArcTxCellThreshTable.
lpEngArcTxCellThreshIndex: This variable represents the lpEngArcTxCellThreshTable specific index for the lpEngArcTxCellThreshTable.
lpEngArcTxCellThreshValue: This variable represents an individual value for the lpEngArcTxCellThreshTable.
lpEngArcRxCellThreshTable: This attribute is a vector which indicates the size and three discard thresholds for receive cell memory for this FP. Receive cell memory is used for storing ATM cells received by this FP which are queued either for handling by the processor on this FP or ...
lpEngArcRxCellThreshEntry: An entry in the lpEngArcRxCellThreshTable.
lpEngArcRxCellThreshIndex: This variable represents the lpEngArcRxCellThreshTable specific index for the lpEngArcRxCellThreshTable.
lpEngArcRxCellThreshValue: This variable represents an individual value for the lpEngArcRxCellThreshTable.
lpEngArcOvRowStatusTable: This entry controls the addition and deletion of lpEngArcOv components.
lpEngArcOvRowStatusEntry: A single entry in the table represents a single lpEngArcOv component.
lpEngArcOvRowStatus: This variable is used as the basis for SNMP naming of lpEngArcOv components. These components can be added and deleted.
lpEngArcOvComponentName: This variable provides the component's string name for use with the ASCII Console Interface
lpEngArcOvStorageType: This variable represents the storage type value for the lpEngArcOv tables.
lpEngArcOvIndex: This variable represents the index for the lpEngArcOv tables.
lpEngArcOvProvTable: This group specifies the configuration of processor-wide ATM- specific resources on a Logical Processor running ATM services on ATM cards. Note that altering any of these parameters will result in a card reboot.
lpEngArcOvProvEntry: An entry in the lpEngArcOvProvTable.
lpEngArcOvTotalConnectionPoolCapacity: This attribute specifies the maximum number of connections (VCC, VPC, and VPT) that can be enabled on this FP. A standard Vpt uses 3 connections and a basic Vpt uses 2. If the LogicalProcessor is associated with a card of a cardType other than one of the ...
lpEngArcOvMulticastBranchesCapacity: This attribute specifies the number of multicast branches that can be enabled on this FP. A multicast branch is used for cell replication on a VCC connection whose Vcc distributionType is pointToMultipoint. A branch represents one ATM destination for the ...
lpEngArcOvTxCellMemoryAllocation: This attribute specifies the fraction of the transmit memory which should be allocated to the transmission of cells on an FP. The remaining memory is allocated for the transmission of frames. Frame memory is used for trunks, ATM VCC testing and for inter- ...
lpEngArcOvRxCellMemoryAllocation: This attribute specifies the fraction of the receive memory which should be allocated to the reception of cells on an FP. The remaining receive memory is allocated for the reception of frames. Frame memory is used for trunks, ATM VCC testing and for int ...
lpEngArcCqcRowStatusTable: This entry controls the addition and deletion of lpEngArcCqc components.
lpEngArcCqcRowStatusEntry: A single entry in the table represents a single lpEngArcCqc component.
lpEngArcCqcRowStatus: This variable is used as the basis for SNMP naming of lpEngArcCqc components. These components can be added and deleted.
lpEngArcCqcComponentName: This variable provides the component's string name for use with the ASCII Console Interface
lpEngArcCqcStorageType: This variable represents the storage type value for the lpEngArcCqc tables.
lpEngArcCqcIndex: This variable represents the index for the lpEngArcCqc tables.
lpEngArcCqcOperTable: This group describes the usage of ATM-specific resources on a Logical Processor running ATM services on a CQC based card.
lpEngArcCqcOperEntry: An entry in the lpEngArcCqcOperTable.
lpEngArcCqcCdvReduction: This attribute indicates if the reduction of the maximum Cell Delay Variation (CDV) of shaped transmit traffic is applicable. When the value of this attribute is disabled, the CDV value can be determined by the following equation: CDV <= 2/ASR + 1/LS wher ...
lpEngArcCqcOvRowStatusTable: This entry controls the addition and deletion of lpEngArcCqcOv components.
lpEngArcCqcOvRowStatusEntry: A single entry in the table represents a single lpEngArcCqcOv component.
lpEngArcCqcOvRowStatus: This variable is used as the basis for SNMP naming of lpEngArcCqcOv components. These components cannot be added nor deleted.
lpEngArcCqcOvComponentName: This variable provides the component's string name for use with the ASCII Console Interface
lpEngArcCqcOvStorageType: This variable represents the storage type value for the lpEngArcCqcOv tables.
lpEngArcCqcOvIndex: This variable represents the index for the lpEngArcCqcOv tables.
lpEngArcCqcOvProvTable: This group specifies the configuration of processor-wide ATM- specific resources on a Logical Processor running ATM services. Note that altering any of these parameters will result in a card reboot.
lpEngArcCqcOvProvEntry: An entry in the lpEngArcCqcOvProvTable.
lpEngArcCqcOvPerVcQueueInterfaces: This attribute specifies the number of independent ports or IMA components which support shaping and per-VC queueing on this FP. When this attribute is not zero, at most 4 independent ports or 4 Ima virtual links are supported, regardless of whether or no ...
lpEngArcCqcOvShapingScalingFactor: This attribute specifies the scaling factor which is to be applied to all shaping rates for this FP. The scaling factor is an inverse factor which is applied to the chosen shaping rate to produce an actual shaping rate. For example, if a shaping rate of 2 ...
lpEngArcCqcOvCdvReduction: This attribute specifies the reduction of the maximum Cell Delay Variation (CDV) of shaped transmit traffic. When the value of this attribute is set to disabled, the CDV value can be determined by the following equation: CDV <= 2/ASR + 1/LS where ASR is t ...
lpEngArcCqcOvPortCongestionPolicy: This attribute specifies the congestion behavior of all ports on this FP. It applies only to transmit traffic served on the common queues and does not apply to per-VC queues. When the value is aggregate, the enqueue decision of cells or frames to a common ...
lpEngArcCqcOvConnCapTable: This attribute is provided for backward compatibility and can only be used if the LogicalProcessor is associated with a card of one of the following cardType: 3pE3Atm, 3pDS3Atm, 3pOC3MmAtm, 3pOC3SmAtm, 3pE1Atm, 3pDS1Atm, 2pJ6MAtm. This attribute can be us ...
lpEngArcCqcOvConnCapEntry: An entry in the lpEngArcCqcOvConnCapTable.
lpEngArcCqcOvConnCapIndex: This variable represents the lpEngArcCqcOvConnCapTable specific index for the lpEngArcCqcOvConnCapTable.
lpEngArcCqcOvConnCapValue: This variable represents an individual value for the lpEngArcCqcOvConnCapTable.
lpEngArcAqmRowStatusTable: This entry controls the addition and deletion of lpEngArcAqm components.
lpEngArcAqmRowStatusEntry: A single entry in the table represents a single lpEngArcAqm component.
lpEngArcAqmRowStatus: This variable is used as the basis for SNMP naming of lpEngArcAqm components. These components can be added and deleted.
lpEngArcAqmComponentName: This variable provides the component's string name for use with the ASCII Console Interface
lpEngArcAqmStorageType: This variable represents the storage type value for the lpEngArcAqm tables.
lpEngArcAqmIndex: This variable represents the index for the lpEngArcAqm tables.
lpEngArcAqmOperTable: This group describes the usage of ATM-specific resources for a specific AQM on a Logical Processor running ATM services.
lpEngArcAqmOperEntry: An entry in the lpEngArcAqmOperTable.
lpEngArcAqmConnectionPoolAvailable: This attribute indicates the number of connection resources available (VCC, VPC, and VPT) that can be configured on the AQM instance of the LogicalProcessor. A standard Vpt uses 3 connection resources and a basic Vpt uses 2.
lpEngArcAqmConnectionPoolUsage: This attribute indicates the total number of connections for configured VCCs, VPCs, and VPTs in AtmIfs associated with the AQM instance of the LogicalProcessor. A standard Vpt uses 3 connection resources and a basic Vpt uses 2.
lpEngArcAqmTxCellMemoryAvailable: This attribute indicates the current availability of the transmit cell memory. The transmit cell memory is the memory available for storing ATM cells to be transmitted by the Lp.
lpEngArcAqmTxCellMemoryMinAvailable: This attribute indicates the lowest availability of the transmit cell memory. The transmit cell memory is the memory available for storing ATM cells to be transmitted by the Lp. This attribute is reset to the current availability every 15 minutes and when ...
lpEngArcAqmTxCellMemoryCongestionState: This attribute indicates the congestion state of the transmit cell memory for the ATM Queue Manager (AQM) ASIC on this FP. This attribute indicates which txCellMemoryThresholds corresponds to the current value of txCellMemoryUsage. The congestion state is ...
lpEngArcAqmTxCellMemoryMaxUsage: This attribute indicates the maximum number which has recently occurred for the txCellMemoryUsage attribute. Transmit cell memory is used for storing ATM cells to be transmitted by connections for the ATM Queue Manager (AQM) ASIC on this FP. It includes a ...
lpEngArcAqmTxCellMemoryUsage: This attribute indicates the current number of transmit cells which are in use on this FP. Transmit cell memory is used for storing ATM cells to be transmitted by connections for the ATM Queue Manager (AQM) ASIC on this FP. It includes all cells in all co ...
lpEngArcAqmMaxVirtualLinks: This attribute indicates the maximum number of virtual links (VLs) that can exist on this AQM. Normally a virtual link contains all VCCs and VPCs provisioned for a port (OC-3, DS3, E3, etc), making a virtual link equivalent to a port. However, if an AtmIf ...
lpEngArcAqmVirtualLinkUsage: This attribute indicates the number of virtual links in use on this AQM. Its maximum value is the value of operational attribute maxVirtualLinks. Since each port uses one virtual link, if maxVirtualLinks has value sameNumberAsPorts then virtualLinkUsage w ...
lpEngArcAqmVirtualLinkGranularity: This attribute indicates the granularity on which virtual link bandwidths are allocated. It is affected by the Override subcomponent's provisionable virtualLinkGranularity attribute, and will vary between 562 cell/s (minimum granularity for an E3 G.751 PL ...
lpEngArcAqmTxCellThreshTable: This attribute is a vector which indicates the size and three discard thresholds for transmit cell memory for the ATM Queue Manager (AQM) ASIC on this FP. Transmit cell memory is used for storing ATM cells to be transmitted by connections. It includes all ...
lpEngArcAqmTxCellThreshEntry: An entry in the lpEngArcAqmTxCellThreshTable.
lpEngArcAqmTxCellThreshIndex: This variable represents the lpEngArcAqmTxCellThreshTable specific index for the lpEngArcAqmTxCellThreshTable.
lpEngArcAqmTxCellThreshValue: This variable represents an individual value for the lpEngArcAqmTxCellThreshTable.
lpEngArcAqmOvRowStatusTable: This entry controls the addition and deletion of lpEngArcAqmOv components.
lpEngArcAqmOvRowStatusEntry: A single entry in the table represents a single lpEngArcAqmOv component.
lpEngArcAqmOvRowStatus: This variable is used as the basis for SNMP naming of lpEngArcAqmOv components. These components cannot be added nor deleted.
lpEngArcAqmOvComponentName: This variable provides the component's string name for use with the ASCII Console Interface
lpEngArcAqmOvStorageType: This variable represents the storage type value for the lpEngArcAqmOv tables.
lpEngArcAqmOvIndex: This variable represents the index for the lpEngArcAqmOv tables.
lpEngArcAqmOvProvTable: This group specifies the configuration of processor-wide ATM- specific resources on a Logical Processor running ATM services on CQC based cards. Note that altering any of these parameters will result in a card reboot.
lpEngArcAqmOvProvEntry: An entry in the lpEngArcAqmOvProvTable.
lpEngArcAqmOvConnectionPoolCapacity: This attribute specifies the maximum number of connections (VCC, VPC, and VPT) that can be configured on the AQM instance of the LogicalProcessor. The value of this attribute should be less than or equal to totalConnectionPoolCapacity of the Arc component ...
lpEngArcAqmOvHighPriorityEpdOffset: This attribute specifies the high priority Early Packet Discard (EPD) offset for connection queues. On ATM IP FPs a given connection queue is associated with one of eight emission priorities (EP). These include six unshaped EPs, one exclusive VBR shaper E ...
lpEngArcAqmOvLowPriorityEpdOffset: This attribute specifies the low priority Early Packet Discard (EPD) offset for connection queues. On ATM IP FPs a given connection queue is associated with one of eight emission priorities (EP). These include six unshaped EPs, one exclusive VBR shaper EP ...
lpEngArcAqmOvPortCongestionPolicy: This attribute specifies the congestion behavior of all ports on this FP. It applies only to transmit traffic and does not apply to the CBR service category. When the value is aggregate, the enqueue decision of cells or frames to a queue is based upon the ...
lpEngArcAqmOvMaxVirtualLinks: This attribute specifies the maximum number of virtual links that can use this AQM. Refer to the description of the operational attribute maxVirtualLinks under component Lp/n Eng Arc Aqm/n for a complete description of the effects of setting this attribut ...
lpEngArcAqmOvVirtualLinkGranularity: This attribute specifies the granularity on which virtual link bandwidths are allocated. A value of minimum indicates the granularity is as small as possible for the specific card on which the Aqm component resides. A value of DS1, E1, or JT2 indicates th ...
lpEngFcrcRowStatusTable: This entry controls the addition and deletion of lpEngFcrc components.
lpEngFcrcRowStatusEntry: A single entry in the table represents a single lpEngFcrc component.
lpEngFcrcRowStatus: This variable is used as the basis for SNMP naming of lpEngFcrc components. These components can be added and deleted.
lpEngFcrcComponentName: This variable provides the component's string name for use with the ASCII Console Interface
lpEngFcrcStorageType: This variable represents the storage type value for the lpEngFcrc tables.
lpEngFcrcIndex: This variable represents the index for the lpEngFcrc tables.
lpEngFcrcOperTable: This group indicates the configuration of processor-wide frame specific resources on a LogicalProcessor.
lpEngFcrcOperEntry: An entry in the lpEngFcrcOperTable.
lpEngFcrcSubConnectionPoolAvailable: This attribute indicates the number of sub-connections available for the LogicalProcessor. A sub-connection is used for interworking the ATM services with the frame oriented services such as Frame Relay and Path Oriented Routing System (PORS). When a fram ...
lpEngFcrcSubConnectionPoolUsage: This attribute indicates the number of sub-connections being utilized by the LogicalProcessor. A sub-connection is used for interworking the ATM services with the frame oriented services such as Frame Relay and Path Oriented Routing System (PORS). When a ...
lpEngFcrcLnnConnectionPoolAvailable: This attribute indicates the number of resource records available for the connections which utilize Logical Network Number (LNN) on the LogicalProcessor. A logical network is a subset of Passport modules together with a subset of trunks that interconnect ...
lpEngFcrcLnnConnectionPoolUsage: This attribute indicates the number of resource records being utilized for the connections which use Logical Network Number (LNN) on the LogicalProcessor. A logical network is a subset of Passport modules together with a subset of trunks that interconnect ...
lpEngFcrcTxFrameMemoryAvailable: This attribute indicates the current availability of the transmit frame memory (in units of frames). The transmit frame memory is the memory available for storing frames to be transmitted by this FP.
lpEngFcrcTxFrameMemoryMinAvailable: This attribute indicates the lowest availability of the transmit PQC/ CQC frame memory (in units of frames). The transmit frame memory is the memory available for storing frames to be transmitted by this FP. This value is reset every 15 minutes and when t ...
lpEngFcrcTxFrameMemoryCongestionState: This attribute indicates the congestion state of the transmit frame memory for this FP. This attribute indicates which txFrameMemoryThresholds corresponds to the current value of txFrameMemoryUsage. The congestion state is used to determine if frames of a ...
lpEngFcrcRxFrameMemoryAvailable: This attribute indicates the current availability of the receive frame memory (in units of frames). The receive frame memory is the memory available for storing frames received by this FP.
lpEngFcrcRxFrameMemoryMinAvailable: This attribute indicates the lowest availability of the receive frame memory (in units of frames). The receive frame memory is the memory available for storing frames received by this FP. This value is reset every 15 minutes and when the card is reset.
lpEngFcrcRxFrameMemoryCongestionState: This attribute indicates the congestion state of the receive frame memory for this FP. This attribute indicates which rxFrameMemoryThresholds corresponds to the current value of rxFrameMemoryUsage. The congestion state is used to determine if frames of a ...
lpEngFcrcTxFrameMemoryMaxUsage: This attribute indicates the maximum number which has recently occurred for the txFrameMemoryUsage attribute. On CQC-based ATM FPs, this number indicates the maximum usage of transmit frames for all ports on this FP. On ATM IP FPs, this number indicates t ...
lpEngFcrcTxFrameMemoryUsage: This attribute indicates the current number of transmit frames which are in use for this FP. On CQC-based ATM FPs, this number indicates the total transmit frames which are in use for all ports on this FP. On ATM IP FPs, this number indicates the number o ...
lpEngFcrcRxFrameMemoryMaxUsage: This attribute indicates the maximum number which has recently occurred for the rxFrameMemorySize attribute. On CQC-based ATM FPs, this number indicates the maximum usage of receive frames for all ports on this FP. On ATM IP FPs, this number indicates the ...
lpEngFcrcRxFrameMemoryUsage: This attribute indicates the current number of receive frames which are in use for this FP. On CQC-based ATM FPs, this number indicates the total receive frames which are in use for all ports on this FP. On ATM IP FPs, this number indicates the number of ...
lpEngFcrcTxFrThreshTable: This attribute is a vector which indicates the size and three discard thresholds for transmit frame memory for this FP. The transmit frame memory is used for storing frames to be transmitted by this FP. The first value indicates the transmit frame memory ...
lpEngFcrcTxFrThreshEntry: An entry in the lpEngFcrcTxFrThreshTable.
lpEngFcrcTxFrThreshIndex: This variable represents the lpEngFcrcTxFrThreshTable specific index for the lpEngFcrcTxFrThreshTable.
lpEngFcrcTxFrThreshValue: This variable represents an individual value for the lpEngFcrcTxFrThreshTable.
lpEngFcrcRxFrThreshTable: This attribute is a vector which indicates the size and three discard thresholds for receive frame memory for this FP. The receive frame memory is used for storing frames received by this FP. The first value indicates the total receive frame memory size. ...
lpEngFcrcRxFrThreshEntry: An entry in the lpEngFcrcRxFrThreshTable.
lpEngFcrcRxFrThreshIndex: This variable represents the lpEngFcrcRxFrThreshTable specific index for the lpEngFcrcRxFrThreshTable.
lpEngFcrcRxFrThreshValue: This variable represents an individual value for the lpEngFcrcRxFrThreshTable.
lpEngFcrcOvRowStatusTable: This entry controls the addition and deletion of lpEngFcrcOv components.
lpEngFcrcOvRowStatusEntry: A single entry in the table represents a single lpEngFcrcOv component.
lpEngFcrcOvRowStatus: This variable is used as the basis for SNMP naming of lpEngFcrcOv components. These components can be added and deleted.
lpEngFcrcOvComponentName: This variable provides the component's string name for use with the ASCII Console Interface
lpEngFcrcOvStorageType: This variable represents the storage type value for the lpEngFcrcOv tables.
lpEngFcrcOvIndex: This variable represents the index for the lpEngFcrcOv tables.
lpEngFcrcOvProvTable: This group contains frame services provisionable engineering parameters for this LogicalProcessor. Note that altering any of these parameters will result in a card reset.
lpEngFcrcOvProvEntry: An entry in the lpEngFcrcOvProvTable.
lpEngFcrcOvSubConnectionPoolCapacity: This attribute indicates the maximum number of sub-connections for the LogicalProcessor. A sub-connection is used for interworking the ATM services with the frame oriented services such as Frame Relay and Path Oriented Routing System (PORS). When a frame ...
lpEngFcrcOvLnnConnectionPoolCapacity: This attribute indicates the maximum number of resource records for the connections which utilize Logical Network Number (LNN) on the LogicalProcessor. A logical network is a subset of passport modules together with a subset of trunks that interconnect th ...
lpEngFcrcPqcRowStatusTable: This entry controls the addition and deletion of lpEngFcrcPqc components.
lpEngFcrcPqcRowStatusEntry: A single entry in the table represents a single lpEngFcrcPqc component.
lpEngFcrcPqcRowStatus: This variable is used as the basis for SNMP naming of lpEngFcrcPqc components. These components can be added and deleted.
lpEngFcrcPqcComponentName: This variable provides the component's string name for use with the ASCII Console Interface
lpEngFcrcPqcStorageType: This variable represents the storage type value for the lpEngFcrcPqc tables.
lpEngFcrcPqcIndex: This variable represents the index for the lpEngFcrcPqc tables.
lpEngFcrcPqcOperTable: This group describes the usage of resources specific to frame services on a PQC based FP.
lpEngFcrcPqcOperEntry: An entry in the lpEngFcrcPqcOperTable.
lpEngFcrcPqcIpRoutesPoolSize: This attribute indicates the number of IP routing entries permitted on the Logical Processor. If there are enough resources on the card, this value is equal to the provisioned attribute (in Fcrc Pqc Ov) ipRoutesPoolCapacity.
lpEngFcrcPqcIpRoutesPoolUsage: This attribute represents the current number of IP routing entries that are in use.
lpEngFcrcPqcIpRoutesPoolAvailableEst: Each IP routing resource can hold between one and three IP routing entries. Therefore, it is not possible to know exactly how many more IP routing entries can be added to the IP routing table. This attribute specifies the estimated number of IP routing en ...
lpEngFcrcPqcOvRowStatusTable: This entry controls the addition and deletion of lpEngFcrcPqcOv components.
lpEngFcrcPqcOvRowStatusEntry: A single entry in the table represents a single lpEngFcrcPqcOv component.
lpEngFcrcPqcOvRowStatus: This variable is used as the basis for SNMP naming of lpEngFcrcPqcOv components. These components cannot be added nor deleted.
lpEngFcrcPqcOvComponentName: This variable provides the component's string name for use with the ASCII Console Interface
lpEngFcrcPqcOvStorageType: This variable represents the storage type value for the lpEngFcrcPqcOv tables.
lpEngFcrcPqcOvIndex: This variable represents the index for the lpEngFcrcPqcOv tables.
lpEngFcrcPqcOvProvTable: This group is used for fine tuning resource configuration of frame services on a PQC based Logical Processor.
lpEngFcrcPqcOvProvEntry: An entry in the lpEngFcrcPqcOvProvTable.
lpEngFcrcPqcOvIpRoutesPoolCapacity: This attribute indicates the number of desired IP routing entries for the Logical Processor. It is used to determine the number of IP routing resources to be allocated on the card. Each IP routing resource can hold between one and three IP routing entries ...

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list