ctVlanProtoEtherType
Cabletron Vlan Protocol Ether Type
1.3.6.1.4.1.52.4.1.2.16.5.3.1.1
This object returns the protocol or Ether type that is mapped to the VLAN specified in it's instancing. This object takes the value of any valid Ether type(0x0600..0xFFFF). In addition to the previously mentioned range of Ether types, the following values hold special meaning: Value Description DSAP/SSAP/Control ------- --------------- ---------------------- 0x100 LLC_IPX1 0xE0E003 0x101 LLC_IPX2 0xFFFF 0x102 LLC_NETBIOS 0xF0F003 0x103 LLC_BANYAN 0xBCBC03 ::= { ctVlanProtoAssignEntry 1} SYNTAX INTEGER { create(1), delete(2) } ACCESS read-write STATUS mandatory DESCRIPTION A set of the value create(1), causes an entry to be added to the ctVlanProtoAssignTable as specified by the instancing information of ctVlanVID and ctVlanProtoEtherType. This has the result of mapping the specified protocol or Ether type to a VLAN for all received untagged traffic on the ports specified by ctVlanProtoPortList. A set of the value delete(2), causes the specified entry information to be removed from the table. A read of this object will always return create(1).
Back to ctron-vlan-extensions-mib MIB page.
IPHost Network monitor uses SNMP for monitoring health and availability of devices and applications in your network. You can send a SNMP Set to any remote device to monitor a specific SNMP object (CPU, Memory, Disk, Server Temperature, RAID failures, IO statistics, connection counts, error and much more).