rfc1269 Download
With the IPHost SNMP tool, you can monitor any SNMP objects of the
rfc1269-bgp
. You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables,
their current values and descriptions taken from the
rfc1269-bgp
.
OID list for rfc1269
- bgpLocalAs
- The local autonomous system number.
- bgpPeerTable
- The bgp peer table.
- bgpIdentifier
- The BGP Identifier of local system.
- bgpPeerEntry
- Information about a BGP peer connection.
- bgpPeerIdentifier
- The BGP Identifier of this entry's BGP peer.
- bgpPeerState
- The bgp peer connection state.
- bgpPeerAdminStatus
- The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop' will cause the BGP Stop Event to be generated. This parameter can be used to restart BGP peer ...
- bgpPeerNegotiatedVersion
- The negotiated version of BGP running between the two peers.
- bgpPeerLocalAddr
- The local IP address of this entry's BGP connection.
- bgpPeerLocalPort
- The local port for the TCP connection between the BGP peers.
- bgpPeerRemoteAddr
- The remote IP address of this entry's BGP peer.
- bgpPeerRemotePort
- The remote port for the TCP connection between the BGP peers. Note that the objects bgpLocalAddr, bgpLocalPort, bgpRemoteAddr and bgpRemotePort provide the appropriate reference to the standard MIB TCP connection table.
- bgpPeerRemoteAs
- The remote autonomous system number.
- bgpPeerInUpdates
- The number of BGP UPDATE messages received on this connection. This object should be initialized to zero when the connection is established.
- bgpPeerOutUpdates
- The number of BGP UPDATE messages received on this connection. This object should be initialized to zero when the connection is established.
- bgpPeerInTotalMessages
- The total number of messages received from the remote peer on this connection. This object should be initialized to zero when the connection is established.
- bgpPeerOutTotalMessages
- The total number of messages transmitted to the remote peer on this connection. This object should be initialized to zero when the connection is established.
- bgpPeerLastError
- The last error code and subcode seen by this peer on this connection. If no error has occurred, this field is zero. Otherwise, the first byte of this two byte OCTET STRING contains the error code; the second contains the subcode.
- bgpRcvdPathAttrTable
- The BGP Received Path Attribute Table contains information about paths to destination networks received by all peers.
- bgpPathAttrEntry
- Information about a path to a network.
- bgpPathAttrPeer
- The IP address of the peer where the path information was learned.
- bgpPathAttrDestNetwork
- The address of the destination network.
- bgpPathAttrOrigin
- The ultimate origin of the path information.
- bgpPathAttrASPath
- The set of ASs that must be traversed to reach the network. ( This object is probably best represented as SEQUENCE OF INTEGER. For SMI compatibility, though, it is represented as OCTET STRING. Each AS is represented as a pair of octets according to the fo ...
- bgpPathAttrNextHop
- The address of the border router that should be used for the destination network.
- bgpPathAttrInterASMetric
- The optional inter-AS metric. If this attribute has not been provided for this route, the value for this object is 0.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access.
The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.
