rfc1271 Download

etherStatsEntry

A collection of statistics kept for a particular Ethernet interface.

etherStatsIndex

The value of this object uniquely identifies this etherStats entry.

etherStatsDataSource

This object identifies the source of the data that this etherStats entry is configured to analyze. This source can be any ethernet interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifInd ...

etherStatsDropEvents

The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.

etherStatsOctets

The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).

etherStatsPkts

The total number of packets (including error packets) received.

etherStatsBroadcastPkts

The total number of good packets received that were directed to the broadcast address.

etherStatsMulticastPkts

The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.

etherStatsCRCAlignErrors

The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but were not an integral number of octets in length or had a bad Frame Check Sequence (FCS).

etherStatsUndersizePkts

The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.

etherStatsOversizePkts

The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.

etherStatsFragments

The total number of packets received that were not an integral number of octets in length or that had a bad Frame Check Sequence (FCS), and were less than 64 octets in length (excluding framing bits but including FCS octets).

etherStatsJabbers

The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and were not an integral number of octets in length or had a bad Frame Check Sequence (FCS).

etherStatsCollisions

The best estimate of the total number of collisions on this Ethernet segment.

etherStatsPkts64Octets

The total number of packets (including error packets) received that were 64 octets in length (excluding framing bits but including FCS octets).

etherStatsPkts65to127Octets

The total number of packets (including error packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).

etherStatsPkts128to255Octets

The total number of packets (including error packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).

etherStatsPkts256to511Octets

The total number of packets (including error packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).

etherStatsPkts512to1023Octets

The total number of packets (including error packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).

etherStatsPkts1024to1518Octets

The total number of packets (including error packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).

etherStatsOwner

The entity that configured this entry and is therefore using the resources assigned to it.

etherStatsStatus

The status of this etherStats entry.

historyControlTable

A list of history control entries.

historyControlEntry

A list of parameters that set up a periodic sampling of statistics.

historyControlIndex

An index that uniquely identifies an entry in the historyControl table. Each such entry defines a set of samples at a particular interval for an interface on the device.

historyControlDataSource

This object identifies the source of the data for which historical data was collected and placed in a media-specific table on behalf of this historyControlEntry. This source can be any interface on this device. In order to identify a particular interfac ...

historyControlBucketsRequested

The requested number of discrete time intervals over which data is to be saved in the part of the media-specific table associated with this historyControl entry. When this object is created or modified, the probe should set historyControlBucketsGranted as ...

historyControlBucketsGranted

The number of discrete sampling intervals over which data shall be saved in the part of the media-specific table associated with this historyControl entry. When the associated historyControlBucketsRequested object is created or modified, the probe should ...

historyControlInterval

The interval in seconds over which the data is sampled for each bucket in the part of the media-specific table associated with this historyControl entry. This interval can be set to any number of seconds between 1 and 3600 (1 hour). Because the counters ...

historyControlOwner

The entity that configured this entry and is therefore using the resources assigned to it.

historyControlStatus

The status of this historyControl entry. Each instance of the media-specific table associated with this historyControlEntry will be deleted by the agent if this historyControlEntry is not equal to valid(1).

etherHistoryTable

A list of Ethernet history entries.

etherHistoryEntry

An historical sample of Ethernet statistics on a particular Ethernet interface. This sample is associated with the historyControlEntry which set up the parameters for a regular collection of these samples.

etherHistoryIndex

The history of which this entry is a part. The history identified by a particular value of this index is the same history as identified by the same value of historyControlIndex.

etherHistorySampleIndex

An index that uniquely identifies the particular sample this entry represents among all samples associated with the same historyControlEntry. This index starts at 1 and increases by one as each new sample is taken.

etherHistoryIntervalStart

The value of sysUpTime at the start of the interval over which this sample was measured. If the probe keeps track of the time of day, it should start the first sample of the history at a time such that when the next hour of the day begins, a sample is st ...

etherHistoryDropEvents

The total number of events in which packets were dropped by the probe due to lack of resources during this interval. Note that this number is not necessarily the number of packets dropped, it is just the number of times this condition has been detected.

etherHistoryOctets

The total number of octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).

etherHistoryPkts

The number of packets (including error packets) received during this sampling interval.

etherHistoryBroadcastPkts

The number of good packets received during this sampling interval that were directed to the broadcast address.

etherHistoryMulticastPkts

The number of good packets received during this sampling interval that were directed to a multicast address. Note that this number does not include packets addressed to the broadcast address.

etherHistoryCRCAlignErrors

The number of packets received during this sampling interval that had a length (excluding framing bits but including FCS octets) between 64 and 1518 octets, inclusive, but were not an integral number of octets in length or had a bad Frame Check Sequence ( ...

etherHistoryUndersizePkts

The number of packets received during this interval that were less than 64 octets long (excluding framing bits but including FCS octets) and were otherwise well formed.

etherHistoryOversizePkts

The number of packets received during this interval that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.

etherHistoryFragments

The total number of packets received during this sampling interval that were not an integral number of octets in length or that had a bad Frame Check Sequence (FCS), and were less than 64 octets in length (excluding framing bits but including FCS octets).

etherHistoryJabbers

The number of packets received during this interval that were longer than 1518 octets (excluding framing bits but including FCS octets), and were not an integral number of octets in length or had a bad Frame Check Sequence (FCS).

etherHistoryCollisions

The best estimate of the total number of collisions on this Ethernet segment during this interval.

etherHistoryUtilization

The best estimate of the mean physical layer network utilization on this interface during this interval, in hundredths of a percent.

alarmTable

A list of alarm entries.

alarmEntry

A list of parameters that set up a periodic checking for alarm conditions.

alarmIndex

An index that uniquely identifies an entry in the alarm table. Each such entry defines a diagnostic sample at a particular interval for an object on the device.

alarmInterval

The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. When setting this variable, care should be given to ensure that the variable being monitored will not exceed 2^31 - 1 and roll over the alarmValue ...

alarmVariable

The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of INTEGER (INTEGER, Counter, Gauge, or TimeTicks) may be sampled. Because SNMP access control is articulated entirely in terms of the ...

alarmSampleType

The method of sampling the selected variable and calculating the value to be compared against the thresholds. If the value of this object is absoluteValue(1), the value of the selected variable will be compared directly with the thresholds at the end of ...

alarmValue

The value of the statistic during the last sampling period. The value during the current sampling period is not made available until the period is completed.

alarmStartupAlarm

The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a singl ...

alarmRisingThreshold

A threshold for the sampled statistic. When the current sampled value is greater than or equal to this threshold, and the value at the last sampling interval was less than this threshold, a single event will be generated. A single event will also be gene ...

alarmFallingThreshold

A threshold for the sampled statistic. When the current sampled value is less than or equal to this threshold, and the value at the last sampling interval was greater than this threshold, a single event will be generated. A single event will also be gene ...

alarmRisingEventIndex

The index of the eventEntry that is used when a rising threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the ev ...

alarmFallingEventIndex

The index of the eventEntry that is used when a falling threshold is crossed. The eventEntry identified by a particular value of this index is the same as identified by the same value of the eventIndex object. If there is no corresponding entry in the e ...

alarmOwner

The entity that configured this entry and is therefore using the resources assigned to it.

alarmStatus

The status of this alarm entry.

hostControlTable

A list of host table control entries.

hostControlEntry

A list of parameters that set up the discovery of hosts on a particular interface and the collection of statistics about these hosts.

hostControlIndex

An index that uniquely identifies an entry in the hostControl table. Each such entry defines a function that discovers hosts on a particular interface and places statistics about them in the hostTable and the hostTimeTable on behalf of this hostControlEn ...

hostControlDataSource

This object identifies the source of the data for this instance of the host function. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, defined in ...

hostControlTableSize

The number of hostEntries in the hostTable and the hostTimeTable associated with this hostControlEntry.

hostControlLastDeleteTime

The value of sysUpTime when the last entry was deleted from the portion of the hostTable associated with this hostControlEntry. If no deletions have occurred, this value shall be zero.

hostControlOwner

The entity that configured this entry and is therefore using the resources assigned to it.

hostControlStatus

The status of this hostControl entry. If this object is not equal to valid(1), all associated entries in the hostTable, hostTimeTable, and the hostTopNTable shall be deleted by the agent.

hostTable

A list of host entries.

hostEntry

A collection of statistics for a particular host that has been discovered on an interface of this device.

hostAddress

The physical address of this host.

hostCreationOrder

An index that defines the relative ordering of the creation time of hosts captured for a particular hostControlEntry. This index shall be between 1 and N, where N is the value of the associated hostControlTableSize. The ordering of the indexes is based ...

hostIndex

The set of collected host statistics of which this entry is a part. The set of hosts identified by a particular value of this index is associated with the hostControlEntry as identified by the same value of hostControlIndex.

hostInPkts

The number of packets without errors transmitted to this address since it was added to the hostTable.

hostOutPkts

The number of packets including errors transmitted by this address since it was added to the hostTable.

hostInOctets

The number of octets transmitted to this address since it was added to the hostTable (excluding framing bits but including FCS octets), except for those octets in packets that contained errors.

hostOutOctets

The number of octets transmitted by this address since it was added to the hostTable (excluding framing bits but including FCS octets), including those octets in packets that contained errors.

hostOutErrors

The number of error packets transmitted by this address since this host was added to the hostTable.

hostOutBroadcastPkts

The number of good packets transmitted by this address that were directed to the broadcast address since this host was added to the hostTable.

hostOutMulticastPkts

The number of good packets transmitted by this address that were directed to a multicast address since this host was added to the hostTable. Note that this number does not include packets directed to the broadcast address.

hostTimeTable

A list of time-ordered host table entries.

hostTimeEntry

A collection of statistics for a particular host that has been discovered on an interface of this device. This collection includes the relative ordering of the creation time of this object.

hostTimeAddress

The physical address of this host.

hostTimeCreationOrder

An index that uniquely identifies an entry in the hostTime table among those entries associated with the same hostControlEntry. This index shall be between 1 and N, where N is the value of the associated hostControlTableSize. The ordering of the indexes ...

hostTimeIndex

The set of collected host statistics of which this entry is a part. The set of hosts identified by a particular value of this index is associated with the hostControlEntry as identified by the same value of hostControlIndex.

hostTimeInPkts

The number of packets without errors transmitted to this address since it was added to the hostTimeTable.

hostTimeOutPkts

The number of packets including errors transmitted by this address since it was added to the hostTimeTable.

hostTimeInOctets

The number of octets transmitted to this address since it was added to the hostTimeTable (excluding framing bits but including FCS octets), except for those octets in packets that contained errors.

hostTimeOutOctets

The number of octets transmitted by this address since it was added to the hostTimeTable (excluding framing bits but including FCS octets), including those octets in packets that contained errors.

hostTimeOutErrors

The number of error packets transmitted by this address since this host was added to the hostTimeTable.

hostTimeOutBroadcastPkts

The number of good packets transmitted by this address that were directed to the broadcast address since this host was added to the hostTimeTable.

hostTimeOutMulticastPkts

The number of good packets transmitted by this address that were directed to a multicast address since this host was added to the hostTimeTable. Note that this number does not include packets directed to the broadcast address.

hostTopNControlTable

A list of top N host control entries.

hostTopNControlEntry

A set of parameters that control the creation of a report of the top N hosts according to several metrics.

hostTopNControlIndex

An index that uniquely identifies an entry in the hostTopNControl table. Each such entry defines one top N report prepared for one interface.

hostTopNHostIndex

The host table for which a top N report will be prepared on behalf of this entry. The host table identified by a particular value of this index is associated with the same host table as identified by the same value of hostIndex. This object may not be mo ...

hostTopNRateBase

The variable for each host that the hostTopNRate variable is based upon. This object may not be modified if the associated hostTopNStatus object is equal to valid(1).

hostTopNTimeRemaining

The number of seconds left in the report currently being collected. When this object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of thi ...

hostTopNDuration

The number of seconds that this report has collected during the last sampling interval, or if this report is currently being collected, the number of seconds that this report is being collected during this sampling interval. When the associated hostTopNTi ...

hostTopNRequestedSize

The maximum number of hosts requested for the top N table. When this object is created or modified, the probe should set hostTopNGrantedSize as closely to this object as is possible for the particular probe implementation and available resources.

hostTopNGrantedSize

The maximum number of hosts in the top N table. When the associated hostTopNRequestedSize object is created or modified, the probe should set this object as closely to the requested value as is possible for the particular implementation and available reso ...

hostTopNStartTime

The value of sysUpTime when this top N report was last started. In other words, this is the time that the associated hostTopNTimeRemaining object was modified to start the requested report.

hostTopNOwner

The entity that configured this entry and is therefore using the resources assigned to it.

hostTopNStatus

The status of this hostTopNControl entry. If this object is not equal to valid(1), all associated hostTopNEntries shall be deleted by the agent.

hostTopNTable

A list of top N host entries.

hostTopNEntry

A set of statistics for a host that is part of a top N report.

hostTopNReport

This object identifies the top N report of which this entry is a part. The set of hosts identified by a particular value of this object is part of the same report as identified by the same value of the hostTopNControlIndex object.

hostTopNIndex

An index that uniquely identifies an entry in the hostTopN table among those in the same report. This index is between 1 and N, where N is the number of entries in this table. Increasing values of hostTopNIndex shall be assigned to entries with decreasin ...

hostTopNAddress

The physical address of this host.

hostTopNRate

The amount of change in the selected variable during this sampling interval. The selected variable is this host's instance of the object selected by hostTopNRateBase.

matrixControlTable

A list of information entries for the traffic matrix on each interface.

matrixControlEntry

Information about a traffic matrix on a particular interface.

matrixControlIndex

An index that uniquely identifies an entry in the matrixControl table. Each such entry defines a function that discovers conversations on a particular interface and places statistics about them in the matrixSDTable and the matrixDSTable on behalf of this ...

matrixControlDataSource

This object identifies the source of the data from which this entry creates a traffic matrix. This source can be any interface on this device. In order to identify a particular interface, this object shall identify the instance of the ifIndex object, def ...

matrixControlTableSize

The number of matrixSDEntries in the matrixSDTable for this interface. This must also be the value of the number of entries in the matrixDSTable for this interface.

matrixControlLastDeleteTime

The value of sysUpTime when the last entry was deleted from the portion of the matrixSDTable or matrixDSTable associated with this matrixControlEntry. If no deletions have occurred, this value shall be zero.

matrixControlOwner

The entity that configured this entry and is therefore using the resources assigned to it.

matrixControlStatus

The status of this matrixControl entry. If this object is not equal to valid(1), all associated entries in the matrixSDTable and the matrixDSTable shall be deleted by the agent.

matrixSDTable

A list of traffic matrix entries indexed by source and destination MAC address.

matrixSDEntry

A collection of statistics for communications between two addresses on a particular interface.

matrixSDSourceAddress

The source physical address.

matrixSDDestAddress

The destination physical address.

matrixSDIndex

The set of collected matrix statistics of which this entry is a part. The set of matrix statistics identified by a particular value of this index is associated with the same matrixControlEntry as identified by the same value of matrixControlIndex.

matrixSDPkts

The number of packets transmitted from the source address to the destination address (this number includes error packets).

matrixSDOctets

The number of octets (excluding framing bits but including FCS octets) contained in all packets transmitted from the source address to the destination address.

matrixSDErrors

The number of error packets transmitted from the source address to the destination address.

matrixDSTable

A list of traffic matrix entries indexed by destination and source MAC address.

matrixDSEntry

A collection of statistics for communications between two address on a particular interface.

matrixDSSourceAddress

The source physical address.

matrixDSDestAddress

The destination physical address.

matrixDSIndex

The set of collected matrix statistics of which this entry is a part. The set of matrix statistics identified by a particular value of this index is associated with the same matrixControlEntry as identified by the same value of matrixControlIndex.

matrixDSPkts

The number of packets transmitted from the source address to the destination address (this number includes error packets).

matrixDSOctets

The number of octets (excluding framing bits but including FCS octets) contained in all packets transmitted from the source address to the destination address.

matrixDSErrors

The number of error packets transmitted from the source address to the destination address.

filterTable

A list of packet filter entries.

filterEntry

A set of parameters for a packet filter applied on a particular interface.

filterIndex

An index that uniquely identifies an entry in the filter table. Each such entry defines one filter that is to be applied to every packet received on an interface.

filterChannelIndex

This object identifies the channel of which this filter is a part. The filters identified by a particular value of this object are associated with the same channel as identified by the same value of the channelIndex object.

filterPktDataOffset

The offset from the beginning of each packet where a match of packet data will be attempted. This offset is measured from the point in the physical layer packet after the framing bits, if any. For example, in an Ethernet frame, this point is at the begi ...

filterPktData

The data that is to be matched with the input packet. For each packet received, this filter and the accompanying filterPktDataMask and filterPktDataNotMask will be adjusted for the offset. The only bits relevant to this match algorithm are those that hav ...

filterPktDataMask

The mask that is applied to the match process. After adjusting this mask for the offset, only those bits in the received packet that correspond to bits set in this mask are relevant for further processing by the match algorithm. The offset is applied to ...

filterPktDataNotMask

The inversion mask that is applied to the match process. After adjusting this mask for the offset, those relevant bits in the received packet that correspond to bits cleared in this mask must all be equal to their corresponding bits in the filterPktData ...

filterPktStatus

The status that is to be matched with the input packet. The only bits relevant to this match algorithm are those that have the corresponding filterPktStatusMask bit equal to one. The following two rules are then applied to every packet: (1) For each rele ...

filterPktStatusMask

The mask that is applied to the status match process. Only those bits in the received packet that correspond to bits set in this mask are relevant for further processing by the status match algorithm. For the purposes of the matching algorithm, if the as ...

filterPktStatusNotMask

The inversion mask that is applied to the status match process. Those relevant bits in the received packet status that correspond to bits cleared in this mask must all be equal to their corresponding bits in the filterPktStatus object for the packet to b ...

filterOwner

The entity that configured this entry and is therefore using the resources assigned to it.

filterStatus

The status of this filter entry.

channelTable

A list of packet channel entries.

channelEntry

A set of parameters for a packet channel applied on a particular interface.

channelIndex

An index that uniquely identifies an entry in the channel table. Each such entry defines one channel, a logical data and event stream.

channelIfIndex

The value of this object uniquely identifies the interface on this remote network monitoring device to which the associated filters are applied to allow data into this channel. The interface identified by a particular value of this object is the same int ...

channelAcceptType

This object controls the action of the filters associated with this channel. If this object is equal to acceptMatched(1), packets will be accepted to this channel if they are accepted by both the packet data and packet status matches of an associated fil ...

channelDataControl

This object controls the flow of data through this channel. If this object is on(1), data, status and events flow through this channel. If this object is off(2), data, status and events will not flow through this channel.

channelTurnOnEventIndex

The value of this object identifies the event that is configured to turn the associated channelDataControl from off to on when the event is generated. The event identified by a particular value of this object is the same event as identified by the same v ...

channelTurnOffEventIndex

The value of this object identifies the event that is configured to turn the associated channelDataControl from on to off when the event is generated. The event identified by a particular value of this object is the same event as identified by the same v ...

channelEventIndex

The value of this object identifies the event that is configured to be generated when the associated channelDataControl is on and a packet is matched. The event identified by a particular value of this object is the same event as identified by the same v ...

channelEventStatus

The event status of this channel. If this channel is configured to generate events when packets are matched, a means of controlling the flow of those events is often needed. When this object is equal to eventReady(1), a single event may be generated, aft ...

channelMatches

The number of times this channel has matched a packet. Note that this object is updated even when channelDataControl is set to off.

channelDescription

A comment describing this channel.

channelOwner

The entity that configured this entry and is therefore using the resources assigned to it.

channelStatus

The status of this channel entry.

bufferControlTable

A list of buffers control entries.

bufferControlEntry

A set of parameters that control the collection of a stream of packets that have matched filters.

bufferControlIndex

An index that uniquely identifies an entry in the bufferControl table. The value of this index shall never be zero. Each such entry defines one set of packets that is captured and controlled by one or more filters.

bufferControlChannelIndex

An index that identifies the channel that is the source of packets for this bufferControl table. The channel identified by a particular value of this index is the same as identified by the same value of the channelIndex object. This object may not be modi ...

bufferControlFullStatus

This object shows whether the buffer has room to accept new packets or if it is full. If the status is spaceAvailable(1), the buffer is accepting new packets normally. If the status is full(2) and the associated bufferControlFullAction object is wrapWhen ...

bufferControlFullAction

Controls the action of the buffer when it reaches the full status. When in the lockWhenFull(1) state a packet is added to the buffer that fills the buffer, the bufferControlFullStatus will be set to full(2) and this buffer will stop capturing packets.

bufferControlCaptureSliceSize

The maximum number of octets of each packet that will be saved in this capture buffer. For example, if a 1500 octet packet is received by the probe and this object is set to 500, then only 500 octets of the packet will be stored in the associated capture ...

bufferControlDownloadSliceSize

The maximum number of octets of each packet in this capture buffer that will be returned in an SNMP retrieval of that packet. For example, if 500 octets of a packet have been stored in the associated capture buffer, the associated bufferControlDownloadOf ...

bufferControlDownloadOffset

The offset of the first octet of each packet in this capture buffer that will be returned in an SNMP retrieval of that packet. For example, if 500 octets of a packet have been stored in the associated capture buffer and this object is set to 100, then th ...

bufferControlMaxOctetsRequested

The requested maximum number of octets to be saved in this captureBuffer, including any implementation-specific overhead. If this variable is set to -1, the capture buffer will save as many octets as is possible. When this object is created or modified, t ...

bufferControlMaxOctetsGranted

The maximum number of octets that can be saved in this captureBuffer, including overhead. If this variable is -1, the capture buffer will save as many octets as possible. When the bufferControlMaxOctetsRequested object is created or modified, the probe sh ...

bufferControlCapturedPackets

The number of packets currently in this captureBuffer.

bufferControlTurnOnTime

The value of sysUpTime when this capture buffer was first turned on.

bufferControlOwner

The entity that configured this entry and is therefore using the resources assigned to it.

bufferControlStatus

The status of this buffer Control Entry.

captureBufferTable

A list of packets captured off of a channel.

captureBufferEntry

A packet captured off of an attached network.

captureBufferControlIndex

The index of the bufferControlEntry with which this packet is associated.

captureBufferIndex

An index that uniquely identifies an entry in the captureBuffer table associated with a particular bufferControlEntry. This index will start at 1 and increase by one for each new packet added with the same captureBufferControlIndex.

captureBufferPacketID

An index that describes the order of packets that are received on a particular interface. The packetID of a packet captured on an interface is defined to be greater than the packetID's of all packets captured previously on the same interface. As the capt ...

captureBufferPacketData

The data inside the packet, starting at the beginning of the packet plus any offset specified in the associated bufferControlDownloadOffset, including any link level headers. The length of the data in this object is the minimum of the length of the captu ...

captureBufferPacketLength

The actual length (off the wire) of the packet stored in this entry, including FCS octets.

captureBufferPacketTime

The number of milliseconds that had passed since this capture buffer was first turned on when this packet was captured.

captureBufferPacketStatus

A value which indicates the error status of this packet. The value of this object is defined in the same way as filterPacketStatus. The value is a sum. This sum initially takes the value zero. Then, for each error, E, that has been discovered in this p ...

eventTable

A list of events to be generated.

eventEntry

A set of parameters that describe an event to be generated when certain conditions are met.

eventIndex

An index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur.

eventDescription

A comment describing this event entry.

eventType

The type of notification that the probe will make about this event. In the case of log, an entry is made in the log table for each event. In the case of snmp-trap, an SNMP trap is sent to one or more management stations.

eventCommunity

If an SNMP trap is to be sent, it will be sent to the SNMP community specified by this octet string. In the future this table will be extended to include the party security mechanism. This object shall be set to a string of length zero if it is intended ...

eventLastTimeSent

The value of sysUpTime at the time this event entry last generated an event. If this entry has not generated any events, this value will be zero.

eventOwner

The entity that configured this entry and is therefore using the resources assigned to it. If this object contains a string starting with 'monitor' and has associated entries in the log table, all connected management stations should retrieve those log en ...

eventStatus

The status of this event entry. If this object is not equal to valid(1), all associated log entries shall be deleted by the agent.

logTable

A list of events that have been logged.

logEntry

A set of data describing an event that has been logged.

logEventIndex

The event entry that generated this log entry. The log identified by a particular value of this index is associated with the same eventEntry as identified by the same value of eventIndex.

logIndex

An index that uniquely identifies an entry in the log table amongst those generated by the same eventEntries. These indexes are assigned beginning with 1 and increase by one with each new log entry. The association between values of logIndex and logEntr ...

logTime

The value of sysUpTime when this log entry was created.

logDescription

An implementation dependent description of the event that activated this log entry.