rfc1406 Download

dsx1ConfigEntry

An entry in the DS1 Configuration table.

dsx1LineIndex

This object is the identifier of a DS1 Inter- face on a managed device. If there is an ifEn- try that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, the value exceeds ifNumbe ...

dsx1IfIndex

This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213).

dsx1TimeElapsed

The number of seconds that have elapsed since the beginning of the current error-measurement period.

dsx1ValidIntervals

The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which case the value will be the number of complete 15 minute intervals the since interf ...

dsx1LineType

This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The ...

dsx1LineCoding

This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. dsx1JBZS refers the Jammed Bit Zero Suppres- sion, in which the AT&T specification of at least one pulse ev ...

dsx1SendCode

This variable indicates what type of code is being sent across the DS1 interface by the dev- ice. The values mean: dsx1SendNoCode sending looped or normal data dsx1SendLineCode sending a request for a line loopback dsx1SendPayloadCode sending a request ...

dsx1CircuitIdentifier

This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.

dsx1LoopbackConfig

This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should return badValue in response to a requested loopback state that the interface does not support. The values mean: dsx1NoLoop Not in ...

dsx1LineStatus

This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. The dsx1LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures ...

dsx1SignalMode

'none' indicates that no bits are reserved for signaling on this channel. 'robbedBit' indicates that T1 Robbed Bit Sig- naling is in use. 'bitOriented' indicates that E1 Channel Asso- ciated Signaling is in use. 'messageOriented' indicates that Common ...

dsx1TransmitClockSource

The source of Tranmit Clock. 'loopTiming' indicates that the recovered re- ceive clock is used as the transmit clock. 'localTiming' indicates that a local clock source is used. 'throughTiming' indicates that recovered re- ceive clock from another ...

dsx1Fdl

This bitmap describes the use of the facili- ties data link, and is the sum of the capabili- ties: 'other' indicates that a protocol other than one following is used. 'dsx1Ansi-T1-403' refers to the FDL exchange recommended by ANSI. 'dsx1Att-54016' ...

dsx1CurrentTable

The DS1 Current table.

dsx1CurrentEntry

An entry in the DS1 Current table.

dsx1CurrentIndex

The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance.

dsx1CurrentESs

The number of Errored Seconds, encountered by a DS1 interface in the current 15 minute inter- val.

dsx1CurrentSESs

The number of Severely Errored Seconds encoun- tered by a DS1 interface in the current 15 minute interval.

dsx1CurrentSEFSs

The number of Severely Errored Framing Seconds encountered by a DS1 interface in the current 15 minute interval.

dsx1CurrentUASs

The number of Unavailable Seconds encountered by a DS1 interface in the current 15 minute in- terval.

dsx1CurrentCSSs

The number of Controlled Slip Seconds encoun- tered by a DS1 interface in the current 15 minute interval.

dsx1CurrentPCVs

The number of Path Coding Violations encoun- tered by a DS1 interface in the current 15 minute interval.

dsx1CurrentLESs

The number of Line Errored Seconds encountered by a DS1 interface in the current 15 minute in- terval.

dsx1CurrentBESs

The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the current 15 minute interval.

dsx1CurrentDMs

The number of Degraded Minutes (DMs) encoun- tered by a DS1 interface in the current 15 minute interval.

dsx1CurrentLCVs

The number of Line Code Violations (LCVs) en- countered by a DS1 interface in the current 15 minute interval.

dsx1IntervalTable

The DS1 Interval table.

dsx1IntervalEntry

An entry in the DS1 Interval table.

dsx1IntervalIndex

The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance.

dsx1IntervalNumber

A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid).

dsx1IntervalESs

The number of Errored Seconds encountered by a DS1 interface in one of the previous 96, indi- vidual 15 minute, intervals.

dsx1IntervalSESs

The number of Severely Errored Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.

dsx1IntervalSEFSs

The number of Severely Errored Framing Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.

dsx1IntervalUASs

The number of Unavailable Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.

dsx1IntervalCSSs

The number of Controlled Slip Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.

dsx1IntervalPCVs

The number of Path Coding Violations encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.

dsx1IntervalLESs

The number of Line Errored Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.

dsx1IntervalBESs

The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.

dsx1IntervalDMs

The number of Degraded Minutes (DMs) encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.

dsx1IntervalLCVs

The number of Line Code Violations (LCVs) en- countered by a DS1 interface in the current 15 minute interval.

dsx1TotalTable

The DS1 Total table. 24 hour interval.

dsx1TotalEntry

An entry in the DS1 Total table.

dsx1TotalIndex

The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance.

dsx1TotalESs

The number of Errored Seconds encountered by a DS1 interface in the previous 24 hour interval

dsx1TotalSESs

The number of Severely Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.

dsx1TotalSEFSs

The number of Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval.

dsx1TotalUASs

The number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour in- terval.

dsx1TotalCSSs

The number of Controlled Slip Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.

dsx1TotalPCVs

The number of Path Coding Violations encoun- tered by a DS1 interface in the previous 24 hour interval.

dsx1TotalLESs

The number of Line Errored Seconds encountered by a DS1 interface in the previous 24 hour in- terval.

dsx1TotalBESs

The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval.

dsx1TotalDMs

The number of Degraded Minutes (DMs) encoun- tered by a DS1 interface in the previous 24 hour interval.

dsx1TotalLCVs

The number of Line Code Violations (LCVs) en- countered by a DS1 interface in the current 15 minute interval.

dsx1FarEndCurrentTable

The DS1 Far End Current table.

dsx1FarEndCurrentEntry

An entry in the DS1 Far End Current table.

dsx1FarEndCurrentIndex

The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx1LineIndex object instance.

dsx1FarEndTimeElapsed

The number of seconds that have elapsed since the beginning of the far end current error-measurement period.

dsx1FarEndValidIntervals

The number of previous far end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute far end interval ...

dsx1FarEndCurrentESs

The number of Far Far End Errored Seconds en- countered by a DS1 interface in the current 15 minute interval.

dsx1FarEndCurrentSESs

The number of Far End Severely Errored Seconds encountered by a DS1 interface in the current 15 minute interval.

dsx1FarEndCurrentSEFSs

The number of Far End Severely Errored Framing Seconds encountered by a DS1 interface in the current 15 minute interval.

dsx1FarEndCurrentUASs

The number of Unavailable Seconds encountered by a DS1 interface in the t UA current 15 minute interval.

dsx1FarEndCurrentCSSs

The number of Far End Controlled Slip Seconds encountered by a DS1 interface in the current 15 minute interval.

dsx1FarEndCurrentLESs

The number of Far End Line Errored Seconds en- countered by a DS1 interface in the current 15 minute interval.

dsx1FarEndCurrentPCVs

The number of Far End Path Coding Violations reported via the far end block error count en- countered by a DS1 interface in the current 15 minute interval.

dsx1FarEndCurrentBESs

The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the current 15 minute interval.

dsx1FarEndCurrentDMs

The number of Degraded Minutes (DMs) encoun- tered by a DS1 interface in the current 15 minute interval.

dsx1FarEndIntervalTable

The DS1 Far End Interval table.

dsx1FarEndIntervalEntry

An entry in the DS1 Far End Interval table.

dsx1FarEndIntervalIndex

The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance.

dsx1FarEndIntervalNumber

A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid).

dsx1FarEndIntervalESs

The number of Far End Errored Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.

dsx1FarEndIntervalSESs

The number of Far End Severely Errored Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.

dsx1FarEndIntervalSEFSs

The number of Far End Severely Errored Framing Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, in- tervals.

dsx1FarEndIntervalUASs

The number of Unavailable Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.

dsx1FarEndIntervalCSSs

The number of Far End Controlled Slip Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.

dsx1FarEndIntervalLESs

The number of Far End Line Errored Seconds en- countered by a DS1 interface in one of the pre- vious 96, individual 15 minute, intervals.

dsx1FarEndIntervalPCVs

The number of Far End Path Coding Violations reported via the far end block error count en- countered by a DS1 interface in one of the pre- vious 96, individual 15 minute, intervals.

dsx1FarEndIntervalBESs

The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.

dsx1FarEndIntervalDMs

The number of Degraded Minutes (DMs) encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.

dsx1FarEndTotalTable

The DS1 Far End Total table.

dsx1FarEndTotalEntry

An entry in the DS1 Far End Total table.

dsx1FarEndTotalIndex

The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx1LineIndex object instance.

dsx1FarEndTotalESs

The number of Far End Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.

dsx1FarEndTotalSESs

The number of Far End Severely Errored Seconds encountered by a DS1 interface in the previous 24 hour interval.

dsx1FarEndTotalSEFSs

The number of Far End Severely Errored Framing Seconds encountered by a DS1 interface in the previous 24 hour interval.

dsx1FarEndTotalUASs

The number of Unavailable Seconds encountered by a DS1 interface in the previous 24 hour in- terval.

dsx1FarEndTotalCSSs

The number of Far End Controlled Slip Seconds encountered by a DS1 interface in the previous 24 hour interval.

dsx1FarEndTotalLESs

The number of Far End Line Errored Seconds en- countered by a DS1 interface in the previous 24 hour interval.

dsx1FarEndTotalPCVs

The number of Far End Path Coding Violations reported via the far end block error count en- countered by a DS1 interface in the previous 24 hour interval.

dsx1FarEndTotalBESs

The number of Bursty Errored Seconds (BESs) encountered by a DS1 interface in the previous 24 hour interval.

dsx1FarEndTotalDMs

The number of Degraded Minutes (DMs) encoun- tered by a DS1 interface in the previous 24 hour interval.

dsx1FracTable

The DS1 Fractional table.

dsx1FracEntry

An entry in the DS1 Fractional table.

dsx1FracIndex

The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx1LineIndex object instance.

dsx1FracNumber

The channel number for this entry.

dsx1FracIfIndex

An index value that uniquely identifies an in- terface. The interface identified by a partic- ular value of this index is the same interface as identified by the same value an ifIndex ob- ject instance. If no interface is currently us- ing a channel, ...