rfc1407

rfc1407 Download

MIBs list

With the IPHost SNMP tool, you can monitor any SNMP objects of the rfc1407-ds3 . You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the rfc1407-ds3 .

OID list for rfc1407

dsx3ConfigEntry
An entry in the DS3/E3 Configuration table.
dsx3LineIndex
This object is the identifier of a DS3/E3 Interface on a managed device. If there is an ifEntry that is directly associated with this and only this DS3/E3 interface, it should have the same value as ifIndex. Otherwise, number the dsx3LineIndices with an ...
dsx3IfIndex
This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213).
dsx3TimeElapsed
The number of seconds that have elapsed since the beginning of the near end current error- measurement period.
dsx3ValidIntervals
The number of previous near end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since ...
dsx3LineType
This variable indicates the variety of DS3 C-bit or E3 application implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of DS3 is 44.736 Mbps and E3 is 34.368 Mbps. The dsx3ClearChannel ...
dsx3LineCoding
This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. dsx3B3ZS and e3HDB3 refer to the use of specified patterns of normal bits and bipolar violations which are used to ...
dsx3SendCode
This variable indicates what type of code is being sent across the DS3/E3 interface by the device. (These are optional for E3 interfaces.) The values mean: dsx3SendNoCode sending looped or normal data dsx3SendLineCode sending a request for a line loopbac ...
dsx3CircuitIdentifier
This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.
dsx3LoopbackConfig
This variable represents the loopback configuration of the DS3/E3 interface. The values mean: dsx3NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as it's value. dsx3Payload ...
dsx3LineStatus
This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The dsx3LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures and a loopback (see dsx3Loo ...
dsx3TransmitClockSource
The source of Transmit Clock. is derived from the recovered receive clock of another DS3 interface.
dsx3CurrentTable
The DS3/E3 Current table.
dsx3CurrentEntry
An entry in the DS3/E3 Current table.
dsx3CurrentIndex
The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance.
dsx3CurrentPESs
The counter associated with the number of P-bit Errored Seconds, encountered by a DS3 interface in the current 15 minute interval.
dsx3CurrentPSESs
The counter associated with the number of P-bit Severely Errored Seconds, encountered by a DS3 interface in the current 15 minute interval.
dsx3CurrentSEFSs
The counter associated with the number of Severely Errored Framing Seconds, encountered by a DS3/E3 interface in the current 15 minute interval.
dsx3CurrentUASs
The counter associated with the number of Unavailable Seconds, encountered by a DS3 interface in the current 15 minute interval.
dsx3CurrentLCVs
The counter associated with the number of Line Coding Violations encountered by a DS3/E3 interface in the current 15 minute interval.
dsx3CurrentPCVs
The counter associated with the number of P-bit Coding Violations, encountered by a DS3 interface in the current 15 minute interval.
dsx3CurrentLESs
The number of Line Errored Seconds encountered by a DS3/E3 interface in the current 15 minute interval.
dsx3CurrentCCVs
The number of C-bit Coding Violations encountered by a DS3 interface in the current 15 minute interval.
dsx3CurrentCESs
The number of C-bit Errored Seconds encountered by a DS3 interface in the current 15 minute interval.
dsx3CurrentCSESs
The number of C-bit Severely Errored Seconds encountered by a DS3 interface in the current 15 minute interval.
dsx3IntervalTable
The DS3/E3 Interval table.
dsx3IntervalEntry
An entry in the DS3/E3 Interval table.
dsx3IntervalIndex
The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance.
dsx3IntervalNumber
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).
dsx3IntervalPESs
The counter associated with the number of P-bit Errored Seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
dsx3IntervalPSESs
The counter associated with the number of P-bit Severely Errored Seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
dsx3IntervalSEFSs
The counter associated with the number of Severely Errored Framing Seconds, encountered by a DS3/E3 interface in one of the previous 96, individual 15 minute, intervals.
dsx3IntervalUASs
The counter associated with the number of Unavailable Seconds, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
dsx3IntervalLCVs
The counter associated with the number of Line Coding Violations encountered by a DS3/E3 interface in one of the previous 96, individual 15 minute, intervals.
dsx3IntervalPCVs
The counter associated with the number of P-bit Coding Violations, encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
dsx3IntervalLESs
The number of Line Errored Seconds (BPVs or illegal zero sequences) encountered by a DS3/E3 interface in one of the previous 96, individual 15 minute, intervals.
dsx3IntervalCCVs
The number of C-bit Coding Violations encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
dsx3IntervalCESs
The number of C-bit Errored Seconds encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
dsx3IntervalCSESs
The number of C-bit Severely Errored Seconds encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
dsx3TotalTable
The DS3/E3 Total table. 24 hour interval.
dsx3TotalEntry
An entry in the DS3/E3 Total table.
dsx3TotalIndex
The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance.
dsx3TotalPESs
The counter associated with the number of P-bit Errored Seconds, encountered by a DS3 interface in the previous 24 hour interval
dsx3TotalPSESs
The counter associated with the number of P-bit Severely Errored Seconds, encountered by a DS3 interface in the previous 24 hour interval.
dsx3TotalSEFSs
The counter associated with the number of Severely Errored Framing Seconds, encountered by a DS3/E3 interface in the previous 24 hour interval.
dsx3TotalUASs
The counter associated with the number of Unavailable Seconds, encountered by a DS3 interface in the previous 24 hour interval.
dsx3TotalLCVs
The counter associated with the number of Line Coding Violations encountered by a DS3/E3 interface in the previous 24 hour interval.
dsx3TotalPCVs
The counter associated with the number of P-bit Coding Violations, encountered by a DS3 interface in the previous 24 hour interval.
dsx3TotalLESs
The number of Line Errored Seconds (BPVs or illegal zero sequences) encountered by a DS3/E3 interface in the previous 24 hour interval.
dsx3TotalCCVs
The number of C-bit Coding Violations encountered by a DS3 interface in the previous 24 hour interval.
dsx3TotalCESs
The number of C-bit Errored Seconds encountered by a DS3 interface in the previous 24 hour interval.
dsx3TotalCSESs
The number of C-bit Severely Errored Seconds encountered by a DS3 interface in the previous 24 hour interval.
dsx3FarEndConfigTable
The DS3 Far End Configuration table.
dsx3FarEndConfigEntry
An entry in the DS3 Far End Configuration table.
dsx3FarEndLineIndex
The index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance.
dsx3FarEndEquipCode
This is the Far End Equipment Identification code that describes the specific piece of equipment. It is sent within the Path Identification Message.
dsx3FarEndLocationIDCode
This is the Far End Location Identification code that describes the specific location of the equipment. It is sent within the Path Identification Message.
dsx3FarEndFrameIDCode
This is the Far End Frame Identification code that identifies where the equipment is located within a building at a given location. It is sent within the Path Identification Message.
dsx3FarEndUnitCode
This is the Far End code that identifies the equipment location within a bay. It is sent within the Path Identification Message.
dsx3FarEndFacilityIDCode
This code identifies a specific Far End DS3 path. It is sent within the Path Identification Message.
dsx3FarEndCurrentTable
The DS3 Far End Current table.
dsx3FarEndCurrentEntry
An entry in the DS3 Far End Current table.
dsx3FarEndCurrentIndex
The index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance.
dsx3FarEndTimeElapsed
The number of seconds that have elapsed since the beginning of the far end current error-measurement period.
dsx3FarEndValidIntervals
The number of previous far end intervals for which valid data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute far end intervals since t ...
dsx3FarEndCurrentCESs
The counter associated with the number of Far Far End C-bit Errored Seconds encountered by a DS3 interface in the current 15 minute interval.
dsx3FarEndCurrentCSESs
The counter associated with the number of Far End C-bit Severely Errored Seconds encountered by a DS3 interface in the current 15 minute interval.
dsx3FarEndCurrentCCVs
The counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count encountered by a DS3 interface in the current 15 minute interval.
dsx3FarEndCurrentUASs
The counter associated with the number of Far End unavailable seconds encountered by a DS3 interface in the current 15 minute interval.
dsx3FarEndIntervalTable
The DS3 Far End Interval table.
dsx3FarEndIntervalEntry
An entry in the DS3 Far End Interval table.
dsx3FarEndIntervalIndex
The index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance.
dsx3FarEndIntervalNumber
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).
dsx3FarEndIntervalCESs
The counter associated with the number of Far End C-bit Errored Seconds encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
dsx3FarEndIntervalCSESs
The counter associated with the number of Far End C-bit Severely Errored Seconds encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
dsx3FarEndIntervalCCVs
The counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
dsx3FarEndIntervalUASs
The counter associated with the number of Far End unavailable seconds encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals.
dsx3FarEndTotalTable
The DS3 Far End Total table. 24 hour interval.
dsx3FarEndTotalEntry
An entry in the DS3 Far End Total table.
dsx3FarEndTotalIndex
The index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance.
dsx3FarEndTotalCESs
The counter associated with the number of Far End C-bit Errored Seconds encountered by a DS3 interface in the previous 24 hour interval.
dsx3FarEndTotalCSESs
The counter associated with the number of Far End C-bit Severely Errored Seconds encountered by a DS3 interface in the previous 24 hour interval.
dsx3FarEndTotalCCVs
The counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count encountered by a DS3 interface in the previous 24 hour interval.
dsx3FarEndTotalUASs
The counter associated with the number of Far End unavailable seconds encountered by a DS3 interface in the previous 24 hour interval.
dsx3FracTable
The DS3 Fractional table.
dsx3FracEntry
An entry in the DS3 Fractional table.
dsx3FracIndex
The index value which uniquely identifies the DS3 interface to which this entry is applicable The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance.
dsx3FracNumber
The channel number for this entry.
dsx3FracIfIndex
An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value an ifIndex object instance. If no interface is currently using a channel, the value ...

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list