rfc1515 Download

rpMauTable

Table of descriptive and status information about the MAU(s) attached to the ports of a repeater.

rpMauEntry

An entry in the table, containing information about a single MAU.

rpMauGroupIndex

This variable uniquely identifies the repeater group containing the port to which the MAU described by this entry is connected.

rpMauPortIndex

This variable uniquely identifies the repeater port within group rpMauGroupIndex to which the MAU described by this entry is connected.

rpMauIndex

This variable uniquely identifies the MAU connected to port rpMauPortIndex within group rpMauGroupIndex that is described by this entry.

rpMauType

This object identifies the 10 Mb/s baseband MAU type. An initial set of MAU types are defined above. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If the MAU type is unknown, the object identifier unknownMauType OBJE ...

rpMauStatus

The current state of the MAU. This object may be implemented as a read-only object by those agents and MAUs that do not implement software control of the MAU state. Some agents may not support setting the value of this object to some of the enumerated v ...

rpMauMediaAvailable

If the MAU is a link or fiber type (FOIRL, 10BASE-T, 10BASE-F) then this is equivalent to the link test fail state/low light function. For an AUI or a coax (including broadband) MAU this indicates whether or not loopback is detected on the DI circuit. T ...

rpMauMediaAvailableStateExits

A count of the number of times that rpMauMediaAvailable for this MAU instance leaves the state available(3).

rpMauJabberState

The value other(1) is returned if the jabber state is not 2, 3, or 4. The agent must always return other(1) for MAU type dot3MauTypeAUI. The value unknown(2) is returned when the MAU's true state is unknown; for example, when it is being initialized. If ...

rpMauJabberingStateEnters

A count of the number of times that rpMauJabberState for this MAU instance enters the state jabbering(4). For a MAU of type dot3MauTypeAUI, this counter will always indicate zero.

ifMauTable

Table of descriptive and status information about the MAU(s) attached to an interface.

ifMauEntry

An entry in the table, containing information about a single MAU.

ifMauIfIndex

This variable uniquely identifies the interface to which the MAU described by this entry is connected.

ifMauIndex

This variable uniquely identifies the MAU connected to interface ifMauIfIndex that is described by this entry.

ifMauType

This object identifies the 10 Mb/s baseband or broadband MAU type. An initial set of MAU types are defined above. The assignment of OBJECT IDENTIFIERs to new types of MAUs is managed by the IANA. If the MAU type is unknown, the object identifier unknow ...

ifMauStatus

The current state of the MAU. This object may be implemented as a read-only object by those agents and MAUs that do not implement software control of the MAU state. Some agents may not support setting the value of this object to some of the enumerated v ...

ifMauMediaAvailable

If the MAU is a link or fiber type (FOIRL, 10BASE-T, 10BASE-F) then this is equivalent to the link test fail state/low light function. For an AUI or a coax (including broadband) MAU this indicates whether or not loopback is detected on the DI circuit. T ...

ifMauMediaAvailableStateExits

A count of the number of times that ifMauMediaAvailable for this MAU instance leaves the state available(3).

ifMauJabberState

The value other(1) is returned if the jabber state is not 2, 3, or 4. The agent must always return other(1) for MAU type dot3MauTypeAUI. The value unknown(2) is returned when the MAU's true state is unknown; for example, when it is being initialized. If ...

ifMauJabberingStateEnters

A count of the number of times that ifMauJabberState for this MAU instance enters the state jabbering(4). For a MAU of type dot3MauTypeAUI, this counter will always indicate zero.

broadMauBasicTable

Table of descriptive and status information about the broadband MAUs connected to interfaces.

broadMauBasicEntry

An entry in the table, containing information about a single broadband MAU.

broadMauIfIndex

This variable uniquely identifies the interface to which the MAU described by this entry is connected.

broadMauIndex

This variable uniquely identifies the MAU connected to interface broadMauIfIndex that is described by this entry.

broadMauXmtRcvSplitType

This object indicates the type of frequency multiplexing/cabling system used to separate the transmit and receive paths for the 10BROAD36 MAU. The value other(1) is returned if the split type is not either single or dual. The value single(2) indicates a s ...

broadMauXmtCarrierFreq

This variable indicates the transmit carrier frequency of the 10BROAD36 MAU in MHz/4; that is, in units of 250 kHz.

broadMauTranslationFreq

This variable indicates the translation offset frequency of the 10BROAD36 MAU in MHz/4; that is, in units of 250 kHz.