rfc1650 Download
With the IPHost SNMP tool, you can monitor any SNMP objects of the
rfc1650-etherlike-mib
. You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables,
their current values and descriptions taken from the
rfc1650-etherlike-mib
.
OID list for rfc1650
- dot3StatsTable
- Statistics for a collection of ethernet-like interfaces attached to a particular system.
- dot3StatsEntry
- Statistics for a particular interface to an ethernet-like medium.
- dot3StatsIndex
- An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
- dot3StatsAlignmentErrors
- A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MA ...
- dot3StatsFCSErrors
- A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC s ...
- dot3StatsSingleCollisionFrames
- A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcast ...
- dot3StatsMultipleCollisionFrames
- A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collision. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUca ...
- dot3StatsSQETestErrors
- A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of ANSI/IEEE 802.3-1985 and its generation is described in section 7.2.4.6 of the same ...
- dot3StatsDeferredTransmissions
- A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions.
- dot3StatsLateCollisions
- The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a packet. Five hundred and twelve bit-times corresponds to 51.2 microseconds on a 10 Mbit/s system. A (late) collision included in ...
- dot3StatsExcessiveCollisions
- A count of frames for which transmission on a particular interface fails due to excessive collisions.
- dot3StatsInternalMacTransmitErrors
- A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsLateCo ...
- dot3StatsCarrierSenseErrors
- The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particular interface. The count represented by an instance of this object is incremented at most once per transmission attempt, even i ...
- dot3StatsFrameTooLongs
- A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user ...
- dot3StatsInternalMacReceiveErrors
- A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsFrameTooLo ...
- dot3StatsEtherChipSet
- This object contains an OBJECT IDENTIFIER which identifies the chipset used to realize the interface. Ethernet-like interfaces are typically built out of several different chips. The MIB implementor is presented with a decision of which chip to identify v ...
- dot3CollTable
- A collection of collision histograms for a particular set of interfaces.
- dot3CollEntry
- A cell in the histogram of per-frame collisions for a particular interface. An instance of this object represents the frequency of individual MAC frames for which the transmission (successful or otherwise) on a particular interface is accompanied by a pa ...
- dot3CollCount
- The number of per-frame media collisions for which a particular collision histogram cell represents the frequency on a particular interface.
- dot3CollFrequencies
- A count of individual MAC frames for which the transmission (successful or otherwise) on a particular interface occurs after the frame has experienced exactly the number of collisions in the associated dot3CollCount object. For example, a frame which is t ...
- etherStatsGroup
- A collection of objects providing information applicable to all ethernet-like network interfaces.
- etherCollisionTableGroup
- A collection of objects providing a histogram of packets successfully transmitted after experiencing exactly N collisions.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access.
The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.
