rfc1724 Download
With the IPHost SNMP tool, you can monitor any SNMP objects of the
rfc1724-ripv2-mib
. You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables,
their current values and descriptions taken from the
rfc1724-ripv2-mib
.
OID list for rfc1724
- rip2GlobalRouteChanges
- The number of route changes made to the IP Route Database by RIP. This does not include the refresh of a route's age.
- rip2GlobalQueries
- The number of responses sent to RIP queries from other systems.
- rip2IfStatTable
- A list of subnets which require separate status monitoring in RIP.
- rip2IfStatEntry
- A Single Routing Domain in a single Subnet.
- rip2IfStatAddress
- The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order.
- rip2IfStatRcvBadPackets
- The number of RIP response packets received by the RIP process which were subsequently discarded for any reason (e.g. a version 0 packet, or an unknown command type).
- rip2IfStatRcvBadRoutes
- The number of routes, in valid RIP packets, which were ignored for any reason (e.g. unknown address family, or invalid metric).
- rip2IfStatSentUpdates
- The number of triggered RIP updates actually sent on this interface. This explicitly does NOT include full updates sent containing new information.
- rip2IfStatStatus
- Writing invalid has the effect of deleting this interface.
- rip2IfConfTable
- A list of subnets which require separate configuration in RIP.
- rip2IfConfEntry
- A Single Routing Domain in a single Subnet.
- rip2IfConfAddress
- The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for the IP Interface in network byte order.
- rip2IfConfDomain
- Value inserted into the Routing Domain field of all RIP packets sent on this interface.
- rip2IfConfAuthType
- The type of Authentication used on this interface.
- rip2IfConfAuthKey
- The value to be used as the Authentication Key whenever the corresponding instance of rip2IfConfAuthType has a value other than noAuthentication. A modification of the corresponding instance of rip2IfConfAuthType does not modify the rip2IfConfAuthKey val ...
- rip2IfConfSend
- What the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates using RFC 1058 route subsumption rules. ripVersion2 implies multicasting RIP-2 updates. ripV1 ...
- rip2IfConfReceive
- This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets.
- rip2IfConfDefaultMetric
- This variable indicates the metric that is to be used for the default route entry in RIP updates originated on this interface. A value of zero indicates that no default route should be originated; in this case, a default route via another router may be p ...
- rip2IfConfStatus
- Writing invalid has the effect of deleting this interface.
- rip2IfConfSrcAddress
- The IP Address this system will use as a source address on this interface. If it is a numbered interface, this MUST be the same value as rip2IfConfAddress. On unnumbered interfaces, it must be the value of rip2IfConfAddress for some interface on the sys ...
- rip2PeerTable
- A list of RIP Peers.
- rip2PeerEntry
- Information regarding a single routing peer.
- rip2PeerAddress
- The IP Address that the peer is using as its source address. Note that on an unnumbered link, this may not be a member of any subnet on the system.
- rip2PeerDomain
- The value in the Routing Domain field in RIP packets received from the peer. As domain suuport is deprecated, this must be zero.
- rip2PeerLastUpdate
- The value of sysUpTime when the most recent RIP update was received from this system.
- rip2PeerVersion
- The RIP version number in the header of the last RIP packet received.
- rip2PeerRcvBadPackets
- The number of RIP response packets from this peer discarded as invalid.
- rip2PeerRcvBadRoutes
- The number of routes from this peer that were ignored because the entry format was invalid.
- rip2GlobalGroup
- This group defines global controls for RIP-II systems.
- rip2IfStatGroup
- This group defines interface statistics for RIP-II systems.
- rip2IfConfGroup
- This group defines interface configuration for RIP-II systems.
- rip2PeerGroup
- This group defines peer information for RIP-II systems.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access.
The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.
