The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for "client server"
- Enterasys Radius Accounting Client Server Entry
- etsysRadiusAcctClientServerEntry 1.3.6.1.4.1.5624.1.2.27.1.4.1 (defined in enterasys-radius-acct-client-ext-mib)
An entry (conceptual row) representing a RADIUS Accounting server with which the client shares a secret. If RADIUS Accounting is not enabled, this table is ignored. All created conceptual rows are non-volatile and as such must be maintained upon restart of the agent. - Enterasys Radius Accounting Client Server Address
- etsysRadiusAcctClientServerAddress 1.3.6.1.4.1.5624.1.2.27.1.4.1.3 (defined in enterasys-radius-acct-client-ext-mib)
The Internet address for the RADIUS Accounting server. Note that implementations must limit themselves to a single entry in this table per reachable server. The etsysRadiusAcctClientServerAddress may not be empty due to the SIZE restriction. Also the size of a DNS name is limited to 64 characters. This parameter value is maintained across system reboots. - Enterasys Radius Accounting Client Server Secret Entered
- etsysRadiusAcctClientServerSecretEntered 1.3.6.1.4.1.5624.1.2.27.1.4.1.6 (defined in enterasys-radius-acct-client-ext-mib)
This indicates the existence of a shared secret. - Enterasys Radius Accounting Client Server Retries
- etsysRadiusAcctClientServerRetries 1.3.6.1.4.1.5624.1.2.27.1.4.1.8 (defined in enterasys-radius-acct-client-ext-mib)
The number of times to resend an accounting packet if a RADIUS Accounting Server does not respond to a request. This parameter value is maintained across system reboots. - Enterasys Radius Accounting Client Server Update Interval
- etsysRadiusAcctClientServerUpdateInterval 1.3.6.1.4.1.5624.1.2.27.1.4.1.11 (defined in enterasys-radius-acct-client-ext-mib)
This indicates how many seconds elapse between accounting interim updates from the client to this RADIUS server. This parameter value is maintained across system reboots. A value of zero means no Interim Updates. If the value is less than etsysRadiusAcctClientServerIntervalMinimum, the etsysRadiusAcctClientServerIntervalMinimum value will be used for the update interval time. If RADIUS Accounting is not enabled, this object is ignored. Note that Accounting Interim Updates are not issued by the RADIUS Accounting Client, unless so requested by the RADIUS Server in an Access Accept packet. A value of -1 indicates that this object is not configured and this device will use the value configured in etsysRadiusAcctClientUpdateInterval for the minimum value in seconds between accounting interim updates for this RADIUS server. - Enterasys Radius Authentication Client Server Address Encrypt
- etsysRadiusAuthClientServerAddressEncrypt 1.3.6.1.4.1.5624.1.2.5.1.6.1.2 (defined in enterasys-radius-auth-client-encrypt-mib)
The dotted-decimal IPv4 address of RADIUS authentication server. This parameter value is maintained across system reboots. This object's true data type is 2, OCTET STRING. - Enterasys Radius Authentication Client Server Port Number Encrypt
- etsysRadiusAuthClientServerPortNumberEncrypt 1.3.6.1.4.1.5624.1.2.5.1.6.1.3 (defined in enterasys-radius-auth-client-encrypt-mib)
The UDP port number (0-65535) the client is using to send requests to this server. This parameter value is maintained across system reboots. This object's true data type is 1, Integer32. - Enterasys Radius Authentication Client Server Secret Entered Encrypt
- etsysRadiusAuthClientServerSecretEnteredEncrypt 1.3.6.1.4.1.5624.1.2.5.1.6.1.5 (defined in enterasys-radius-auth-client-encrypt-mib)
This object indicates the existence of a shared secret. This object's true data type is 1, Integer32. - Enterasys Radius Authentication Client Server Address
- etsysRadiusAuthClientServerAddress 1.3.6.1.4.1.5624.1.2.4.1.5.1.3 (defined in enterasys-radius-auth-client-mib)
The encoded unicast IP address or hostname of a RADIUS server. RADIUS requests will be sent to this address. If this address is a DNS hostname, then that hostname SHOULD be resolved into an IP address each time an authentication session is initialized. - Enterasys Radius Authentication Client Server Port Number
- etsysRadiusAuthClientServerPortNumber 1.3.6.1.4.1.5624.1.2.4.1.5.1.4 (defined in enterasys-radius-auth-client-mib)
The UDP port number (0-65535) the client will use to send RADIUS requests to this server. - Enterasys Radius Authentication Client Server Secret
- etsysRadiusAuthClientServerSecret 1.3.6.1.4.1.5624.1.2.4.1.5.1.5 (defined in enterasys-radius-auth-client-mib)
This object is the secret shared between the RADIUS authentication server and the RADIUS client. On a read operation this object MUST return a zero length string. Writing this object with a zero length string clears the secret. - Enterasys Radius Authentication Client Server Status
- etsysRadiusAuthClientServerStatus 1.3.6.1.4.1.5624.1.2.4.1.5.1.8 (defined in enterasys-radius-auth-client-mib)
The row status of this conceptual row in the table. active - The server is available for performing RADIUS operations. Other writable leaves in this row MUST NOT be modified while the row is in the active state. notInService - The entry is fully configured but is not available for performing RADIUS operations. Conceptual rows with this status MAY be deleted at the discretion of the agent, at which time it will be treated as if destroy(6) was SET to this object. notReady - The entry exists in the agent, but is missing information necessary in order to be available for use by the managed device (i.e., one or more required columns in the conceptual row have not been instantiated); createAndGo - Not possible. createAndWait - Creates a new instance of a conceptual row, but does not make it available for use by the managed device. destroy - This will remove the conceptual row from the table and make it unavailable for RADIUS client operations. This MUST also cause any persistent data related to this row to be removed from the system. Maintaining active(1) entries across agent reboots is REQUIRED. - Enterasys Radius Authentication Client Server Timeout
- etsysRadiusAuthClientServerTimeout 1.3.6.1.4.1.5624.1.2.4.1.5.1.10 (defined in enterasys-radius-auth-client-mib)
The number of seconds to wait for a RADIUS Server to respond to a request. A value of -1 indicates that the server timeout specified by etsysRadiusAuthClientRetryTimeout should be used for this server. Maintaining the value of this object across agent reboots is REQUIRED. - Enterasys Tacacs Client Server Table
- etsysTacacsClientServerTable 1.3.6.1.4.1.5624.1.2.58.1.3.1 (defined in enterasys-tacacs-client-mib)
A list of TACACS+ servers that this client may attempt to use. - Enterasys Tacacs Client Server Entry
- etsysTacacsClientServerEntry 1.3.6.1.4.1.5624.1.2.58.1.3.1.1 (defined in enterasys-tacacs-client-mib)
A TACACS+ server that this client may attempt to use. - Enterasys Tacacs Client Server Address
- etsysTacacsClientServerAddress 1.3.6.1.4.1.5624.1.2.58.1.3.1.1.3 (defined in enterasys-tacacs-client-mib)
The Internet address for the TACACS+ server. The etsysTacacsClientServerAddress may not be empty due to the SIZE restriction. Also the size of a DNS name is limited to 64 characters. If a row is created administratively by an SNMP operation and the address type value is dns(16), then the agent stores the DNS name internally. A DNS name lookup must be performed on the internally stored DNS name whenever it is being used to contact the peer. If a row is created by the managed entity itself and the address type value is dns(16), then the agent stores the IP address internally. A DNS reverse lookup must be performed on the internally stored IP address whenever the value is retrieved via SNMP. - Enterasys Tacacs Client Server Port Number
- etsysTacacsClientServerPortNumber 1.3.6.1.4.1.5624.1.2.58.1.3.1.1.4 (defined in enterasys-tacacs-client-mib)
The TCP port number (0-65535) the client is using to send requests to this server. - Enterasys Tacacs Client Server Secret Entered
- etsysTacacsClientServerSecretEntered 1.3.6.1.4.1.5624.1.2.58.1.3.1.1.7 (defined in enterasys-tacacs-client-mib)
This indicates the existence of a shared secret. - bsn Radius Authentication Client Server Port Number
- bsnRadiusAuthClientServerPortNumber 1.3.6.1.4.1.14179.2.5.1.1.3 (defined in AIRESPACE-WIRELESS-MIB)
The UDP port the client is using to send requests to this server. - bsn Radius Accounting Client Server Port Number
- bsnRadiusAccClientServerPortNumber 1.3.6.1.4.1.14179.2.5.2.1.3 (defined in AIRESPACE-WIRELESS-MIB)
The UDP port the client is using to send requests to this server. - Cisco Authorization Client Server Port Number
- cAuthorizClientServerPortNum 1.3.6.1.4.1.9.9.343.1.2.1.4 (defined in CISCO-AUTHORIZATION-STATS-MIB)
The UDP The port on the server to which authorization requests are directed. - Altiga Administrator Authentication Client Server Port Number
- alAdminAuthClientServerPortNumber 1.3.6.1.4.1.3076.2.1.2.39.2.1.3 (defined in ADMIN-AUTH-STATS-MIB)
The UDP port the client is using to send requests to this server.
