OIDs - connection_port monitor
The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for "connection port"
- atmx Ces Virtual Channel Connection Port Index
- atmxCesVccPortIndex 1.3.6.1.4.1.800.2.4.10.1.2.1.1.2 (defined in XYLAN-ATM-CE-MIB)
A unique value which identifies the service interface port. - atmx Virtual Channel Connection Port Index
- atmxVccPortIndex 1.3.6.1.4.1.800.2.4.5.1.1.2 (defined in XYLAN-ATM-MIB)
A unique value which identifies this atm submodule port. - atmx Currently Failing Soft P Virtual Channel Connection Port Index
- atmxCurrentlyFailingSoftPVccPortIndex 1.3.6.1.4.1.800.2.9.2.1.2.1.2 (defined in XYLAN-SOFT-PVC-MIB)
The port instance - Xylan ATM Soft P Virtual Channel Connection Port Index
- xylnatmSoftPVccPortIndex 1.3.6.1.4.1.800.2.9.2.1.5.1.2 (defined in XYLAN-SOFT-PVC-MIB)
Port Instance - sfps Virtual Channel Connection Port Table
- sfpsVccPortTable 1.3.6.1.4.1.52.4.2.4.2.4.1.6 (defined in ctron-sfps-esys-mib)
- sfps Virtual Channel Connection Port Entry
- sfpsVccPortEntry 1.3.6.1.4.1.52.4.2.4.2.4.1.6.1 (defined in ctron-sfps-esys-mib)
- sfps Virtual Channel Connection Port Physical Link State
- sfpsVccPortPhyLinkState 1.3.6.1.4.1.52.4.2.4.2.4.1.6.1.7 (defined in ctron-sfps-esys-mib)
- Enterasys Convergence End Point Connection Port Table
- etsysConvEndPointConnPortTable 1.3.6.1.4.1.5624.1.2.40.1.2.2 (defined in enterasys-convergence-end-point-mib)
This table provides a mapping from the entities interfaces to discovered Convergence End Points. Maintaining the value of this object across system reboots is NOT REQUIRED. - Enterasys Convergence End Point Connection Port Entry
- etsysConvEndPointConnPortEntry 1.3.6.1.4.1.5624.1.2.40.1.2.2.1 (defined in enterasys-convergence-end-point-mib)
Information about an individual Convergence End Point. - Enterasys Convergence End Point Connection Port Mac Address
- etsysConvEndPointConnPortMacAddress 1.3.6.1.4.1.5624.1.2.40.1.2.2.1.1 (defined in enterasys-convergence-end-point-mib)
The MAC address of the discovered or detected Convergence End Point. - Cisco ATM Forum Virtual Channel Connection Port Index
- atmfVccPortIndex 1.3.6.1.4.1.353.2.5.1.1.1 (defined in ATM-FORUM-MIB)
The value of 0 which has the special meaning of identifying the ATM Interface over which this message was received. - cm Connection Port Index
- cmConnectionPortIndex 1.3.6.1.4.1.7505.1.1.16.1.1 (defined in CALISTA-DPA-MIB)
Corresponds to portIndex in PortEntry. - Cisco Ethernet Virtual Connection Port Entry
- cevcPortEntry 1.3.6.1.4.1.9.9.613.1.2.1.1 (defined in CISCO-EVC-MIB)
This entry represents a port, a physical point, at which signals can enter or leave the network en route to or from another network to provide Ethernet services for the MEN. The system automatically creates an entry for each ifEntry in the ifTable having an ifType of 'ethernetCsmacd' capable of supporting Ethernet services and entries are automatically destroyed when the corresponding row in the ifTable is destroyed. - Cisco Ethernet Virtual Connection Port Mode
- cevcPortMode 1.3.6.1.4.1.9.9.613.1.2.1.1.1 (defined in CISCO-EVC-MIB)
Port denotes the physcial interface which can provide Ethernet services. This object indicates the mode of the port and its operational behaviour in the MEN. 'uni' User Network Interface The port resides on the interface between the end user and the network. Additional information related to the UNI is included in cevcUniTable. 'nni' Network to Network Interface. The port resides on the interface between two networks. - Cisco Ethernet Virtual Connection Port Max Num EV Cs
- cevcPortMaxNumEVCs 1.3.6.1.4.1.9.9.613.1.2.1.1.2 (defined in CISCO-EVC-MIB)
This object indicates the maximum number of EVCs that the interface can support. - Cisco Ethernet Virtual Connection Port L2 Control Protocol Table
- cevcPortL2ControlProtocolTable 1.3.6.1.4.1.9.9.613.1.2.3 (defined in CISCO-EVC-MIB)
This table lists the layer 2 control protocol processing attributes at UNI ports. This table has an expansion dependent relationship on the cevcUniTable, containing zero or more rows for each UNI. - Cisco Ethernet Virtual Connection Port L2 Control Protocol Action
- cevcPortL2ControlProtocolAction 1.3.6.1.4.1.9.9.613.1.2.3.1.2 (defined in CISCO-EVC-MIB)
This object specifies the action to be taken for the given layer 2 control protocol service frames which matches the cevcPortL2ControlProtocolType, including: 'discard' The port must discard all ingress service frames carrying the layer 2 control protocol service frames and the port must not generate any egress service frames carrying the layer 2 control protocol service frames. When this action is set at the port, an EVC cannot process the layer 2 control protocol service frames. 'peer' The port must act as a peer, meaning it actively participates with the Customer Equipment, in the operation of the layer 2 control protocol service frames. An example of this is port authentication service at the UNI with 802.1x or enhanced link OAM functionality by peering at the UNI with link OAM (IEEE 802.3ah). When this action is set at the port, an EVC cannot process the layer 2 control protocol service frames. 'passToEvc' The disposition of the service frames which are layer 2 control protocol service frames must be determined by the layer 2 control protocol action attribute of the EVC, (see cevcSIL2ControlProtocolAction for further details). 'peerAndPassToEvc' The layer 2 control protocol service frames will be peered at the port and also passed to one or more EVCs for tunneling. An example of this possibility is where an 802.1x authentication frame is peered at the UNI for UNI-based authentication, but also passed to a given EVC for customer end-to-end authentication. - Cisco Fibre Channel IP Management Fcip Entity Tcp Connection Port
- cfmFcipEntityTcpConnPort 1.3.6.1.4.1.9.10.96.1.1.3.1.4 (defined in CISCO-FCIP-MGMT-MIB)
A TCP port other than the FCIP Well-Known port on which the FCIP entity listens for new TCP connection requests. It contains the value zero (0) if the FCIP Entity only listens on the Well-Known port.