The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for idle cells
- ds3 Port Idle Unassigned Cells
- ds3PortIdleUnassignedCells 1.3.6.1.4.1.43.1.12.3.1.1.11.2.1.1.3 (defined in C-PRODUCT-DS3-MIB)
The counter associated with the idle/unassigned cells, encountered on the ATM interface. - e3 Port Idle Unassigned Cells
- e3PortIdleUnassignedCells 1.3.6.1.4.1.43.1.12.3.1.1.13.2.1.1.3 (defined in C-PRODUCT-E3-MIB)
The counter associated with the idle/unassigned cells, encountered on the ATM interface. - Cabletron Framer Idle Cells Config
- ctFramerIdleCellsConfig 1.3.6.1.4.1.52.4.3.3.9.1.1.1.4 (defined in ctframer-config-mib)
When this object is set to idle, null cells will have the CLP bit set. When this object is set to unassigned, null cells will not have the CLP bit set. This object is persistent. - Cisco ATM cell layer In Receive Idle Cells
- caclInRcvIdleCells 1.3.6.1.4.1.9.9.133.1.2.1.1.12 (defined in CISCO-ATM-CELL-LAYER-MIB)
The number of idle cells received from the interface. - Cisco ATM cell layer Out Receive Idle Cells
- caclOutRcvIdleCells 1.3.6.1.4.1.9.9.133.1.2.1.1.26 (defined in CISCO-ATM-CELL-LAYER-MIB)
The number of idle cells received by the interface from the switch fabric. - Cisco ATM cell layer Interval In Receive Idle Cells
- caclIntervalInRcvIdleCells 1.3.6.1.4.1.9.9.133.1.2.2.1.13 (defined in CISCO-ATM-CELL-LAYER-MIB)
The number of idle cells received from the interface during 15 minute interval. - Cisco ATM cell layer Interval Out Receive Idle Cells
- caclIntervalOutRcvIdleCells 1.3.6.1.4.1.9.9.133.1.2.2.1.27 (defined in CISCO-ATM-CELL-LAYER-MIB)
The number of idle cells received by the interface from the switch fabric during 15 minute interval. - dcl Vs Framer Fax Idle Cells
- dclVsFramerFaxIdleCells (defined in Nortel-Magellan-Passport-DcmeMIB)
This attribute counts the total number of cells containing silent fax data received from the interface which were not forwarded into the network, thus saving bandwidth. A channel may go into silence due to the silence Suppression feature or for CAS channels when the ABCD signalling bits go idle. A cell contains 44 bytes of data from the DS0 channel (5.5 ms). This flow is measured before compression is performed on the channel. This counter wraps to zero after reaching its maximum value. - vs Framer Fax Idle Cells
- vsFramerFaxIdleCells 1.3.6.1.4.1.562.2.4.1.80.2.15.1.44 (defined in Nortel-Magellan-Passport-VoiceMIB)
This attribute counts total cells containing silent modem or fax data received from the interface which was not forwarded into the network, thus saving bandwidth. A channel may go into silence due to the silence Suppression feature (refer to the silenceSuppression attribute) or for CAS channels when the ABCD signalling bits go idle. A cell contains 44 bytes of data from the DS0 channel (5.5 ms). This flow is measured before compression is performed on the channel. This counter wraps to zero after reaching its maximum value. - VoiceRoute Svs Framer Fax Idle Cells
- vsrSvsFramerFaxIdleCells 1.3.6.1.4.1.562.2.4.1.117.2.2.15.1.37 (defined in Nortel-Magellan-Passport-VoiceNetworkingMIB)
This attribute counts the total number of cells containing silent fax data received from the interface which were not forwarded into the network, thus saving bandwidth. A channel may go into silence due to the silence Suppression feature or for CAS channels when the ABCD signalling bits go idle. A cell contains 44 bytes of data from the DS0 channel (5.5 ms). This flow is measured before compression is performed on the channel. This counter wraps to zero after reaching its maximum value.
