The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for map status
- p Map Ingress Admin Status
- pMapIngressAdminStatus 1.3.6.1.4.1.800.2.2.17.1.1.6 (defined in XYLAN-VLAN-MIB)
This object indicates whether to add(1) to or delete(2) from the Port Mapping Ingress List. - p Map Egress Admin Status
- pMapEgressAdminStatus 1.3.6.1.4.1.800.2.2.17.2.1.6 (defined in XYLAN-VLAN-MIB)
This object indicates whether to add(1) to or delete(2) from the Port Mapping Egress Port. - p Map Config Status
- pMapConfigStatus 1.3.6.1.4.1.800.2.2.17.3.1.2 (defined in XYLAN-VLAN-MIB)
This object indicates whether to set (1) or delete (2) the port mapping configeration.. - ppp Link Status Local To Peer ACC Map
- pppLinkStatusLocalToPeerACCMap 1.3.6.1.2.1.10.23.1.1.1.1.8 (defined in rfc1471)
The current value of the ACC Map used for sending packets from the local PPP entity to the remote PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up). - ppp Link Status Peer To Local ACC Map
- pppLinkStatusPeerToLocalACCMap 1.3.6.1.2.1.10.23.1.1.1.1.9 (defined in rfc1471)
The ACC Map used by the remote PPP entity when transmitting packets to the local PPP entity. The value of this object is meaningful only when the link has reached the open state (ifOperStatus is up). - Compaq Network Interface Card If Log Map Status
- cpqNicIfLogMapStatus 1.3.6.1.4.1.232.18.2.2.1.1.11 (defined in CPQNIC)
The status of the logical group. The following values are valid for the logical group status: unknown(1) The instrument agent may not support this value. You may need to load a new instrument agent. ok(2) The adapter group is functioning properly. primaryFailed(3) The adapter specified as primary in the group has failed. the group is still functioning and one of the standby adapters has assumed the role of primary. Depending on the number of adapters in the group, redundancy may be lost. standbyFailed(4) An adapter specified as standby or secondary in the group has failed. the group is still functioning and one of the standby adapters has assumed the role of primary. Depending on the number of adapters in the group, redundancy may be lost. groupFailed(5) All adapters in the group have failed. Network connectivity has been lost for the group. This status will be returned for logical groups with a single physical adapter that has failed. - Enterasys Policy Map Row Status
- etsysPolicyMapRowStatus 1.3.6.1.4.1.5624.1.2.6.10.6.1.2 (defined in enterasys-policy-profile-mib)
This has been obsoleted. - Cisco Access Control List QoS Classifier Map Status
- caqClassifierMapStatus 1.3.6.1.4.1.9.9.179.1.2.2.1.3 (defined in CISCO-CATOS-ACL-QOS-MIB)
The status of this classifier conceptual row entry. An entry may not exist in the active state unless the ACL name denoted by caqClassifierAclName object in the entry exist and active (i.e. its RowStatus object is active(1)) in an ACL table. Once a row becomes active, value in any other column within such row cannot be modified except by setting caqClassifierMapStatus to notInService(2) for such row.
