enterasys-policy-profile-mib Download

etsysPolicyProfileMaxEntries

The maximum number of entries allowed in the etsysPolicyProfileTable.

etsysPolicyProfileNumEntries

The current number of entries in the etsysPolicyProfileTable.

etsysPolicyProfileLastChange

The sysUpTime at which the etsysPolicyProfileTable was last modified.

etsysPolicyProfileTableNextAvailableIndex

This object indicates the numerically lowest available index within this entity, which may be used for the value of etsysPolicyProfileIndex in the creation of a new entry in the etsysPolicyProfileTable. An index is considered available if the index value ...

etsysPolicyProfileTable

A table containing policy profiles. A policy is a group of classification rules which may be applied on a per user basis, to ports or to stations.

etsysPolicyProfileEntry

Conceptually defines a particular entry within the etsysPolicyProfileTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets.

etsysPolicyProfileIndex

A unique arbitrary identifier for this Policy. Since a policy will be applied to a user regardless of his or her location in the network fabric policy names SHOULD be unique within the entire network fabric. Policy IDs and policy names MUST be unique wit ...

etsysPolicyProfileName

Administratively assigned textual description of this Policy. This object MUST NOT be modifiable while this entry's RowStatus is active(1).

etsysPolicyProfileRowStatus

This object allows for the dynamic creation and deletion of entries within the etsysPolicyProfileTable as well as the activation and deactivation of these entries. When this object's value is active(1) the corresponding row's etsysPolicyProfilePortVid, et ...

etsysPolicyProfilePortVidStatus

This object defines whether a PVID override should be applied to ports which have this profile active. enabled(1) means that any port with this policy active will have this row's etsysPolicyProfilePortVid applied to untagged frames or priority-tagged fram ...

etsysPolicyProfilePortVid

This object defines the PVID of this profile. If a port has an active policy and the policy's etsysPolicyProfilePortVidStatus is set to enabled(1), the etsysPolicyProfilePortVid will be applied to all untagged frames arriving on the port that do not match ...

etsysPolicyProfilePriorityStatus

This object defines whether a Class of Service should be applied to ports which have this profile active. enabled(1) means that any port with this policy active will have etsysPolicyProfilePriority applied to this port. disabled(2) means that etsysPolicyP ...

etsysPolicyProfilePriority

This object defines the default ingress Class of Service of this profile. If a port has an active policy and the policy's etsysPolicyProfilePriorityStatus is set to enabled(1), the etsysPolicyProfilePriority will be applied to all packets arriving on the ...

etsysPolicyProfileEgressVlans

The set of VLANs which are assigned by this policy to egress on ports for which this policy is active. Changes to a bit in this object affect the per-port per-VLAN Registrar control for Registration Fixed for the relevant GVRP state machine on each port f ...

etsysPolicyProfileForbiddenVlans

The set of VLANs which are prohibited by this policy to egress on ports for which this policy is active. Changes to this object that cause a port to be included or excluded affect the per-port per-VLAN Registrar control for Registration Forbidden for the ...

etsysPolicyProfileUntaggedVlans

The set of VLANs which should transmit egress packets as untagged on ports for which this policy is active. This object is superseded on a per-port per-VLAN basis by any 'set' bits in dot1qVlanStaticUntaggedPorts.

etsysPolicyProfileOverwriteTCI

If set, the information contained within the TCI field of inbound, tagged packets will not be used by the device after the ingress classification stage of packet relay. The net effect will be that the TCI information may be used to classify the packet, b ...

etsysPolicyProfileRulePrecedence

Each octet will contain a single value representing the rule type to be matched against, defined by the PolicyClassificationRuleType textual convention. When read, will return the currently operating rule matching precedence, ordered from first consulted ...

etsysPolicyProfileVlanRFC3580Mappings

The set of VLANs which are currently being mapped onto this policy profile by the etsysPolicyRFC3580MapTable. This only refers to the mapping of vlan-tunnel-attributes returned from RADIUS in an RFC3580 context.

etsysPolicyProfileMirrorIndex

A reference to a packet mirror destination (defined elsewhere). A value of (-1) indicates no mirror is specified, but a mirror is not explicitly prohibitted. A value of (0) indicates that mirroring is explicitly prohibitted, unless a high precedent source ...

etsysPolicyProfileAuditSyslogEnable

Enables the sending of a syslog message if no rule bound to this profile has prohibited it.

etsysPolicyProfileAuditTrapEnable

Enables the sending of a SNMP NOTIFICATION if no rule bound to this profile has prohibited it.

etsysPolicyProfileDisablePort

Will set the ifOperStatus of the port, on which the frame which used this profile was received, to disable, if if no rule bound to this profile has prohibited it.

etsysPolicyProfileUsageList

When read, a set bit indicates that this profile was used to send a syslog or trap message for corresponding port. When set, the native PortList will be bit-wise AND'ed with the set PortList, allowing the agent to clear the usage indication.

etsysPolicyClassificationMaxEntries

The maximum number of entries allowed in the etsysPolicyClassificationTable.

etsysPolicyClassificationNumEntries

The current number of entries in the etsysPolicyClassificationTable.

etsysPolicyClassificationLastChange

The sysUpTime at which the etsysPolicyClassificationTable was last modified.

etsysPolicyClassificationTable

A table containing reference OIDs to entries within the classification tables. These classification tables include but may not be limited to: ctPriClassifyTable ctVlanClassifyTable ctRatePolicyingConfigTable This table is used to map a list of classificat ...

etsysPolicyClassificationEntry

Describes a particular entry within the etsysPolicyClassificationTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets.

etsysPolicyClassificationIndex

Administratively assigned unique value, greater than zero. Each etsysPolicyClassificationIndex instance MUST be unique within the scope of its associated etsysPolicyProfileIndex.

etsysPolicyClassificationOID

This object follows the RowPointer textual convention and is an OID reference to a classification rule. This object MUST NOT be modifiable while this entry's etsysPolicyClassificationStatus object has a value of active(1).

etsysPolicyClassificationRowStatus

The status of this row. When set to active(1) this entry's classification rule, as referenced by etsysPolicyClassificationOID, becomes one of its associated policy's set of rules. When this entry's associated policy, as defined by etsysPolicyProfileIndex, ...

etsysPolicyClassificationIngressList

The ports on which an active policy profile has defined this classification rule applies.

etsysPortPolicyProfileLastChange

sysUpTime at which the etsysPortPolicyProfileTable was last modified.

etsysPortPolicyProfileTable

This table allows for a one to one mapping between a dot1dBasePort or an ifIndex and a Policy Profile.

etsysPortPolicyProfileEntry

Describes a particular entry within the etsysPortPolicyProfileTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets.

etsysPortPolicyProfileIndexType

This object defines the specific type of port this entry represents.

etsysPortPolicyProfileIndex

An index value which represents a unique port of the type defined by this entry's etsysPortPolicyProfileIndexType.

etsysPortPolicyProfileAdminID

This object represents the desired Policy Profile for this dot1dBasePort or this ifIndex. Setting this object to any value besides zero (0) should, if possible, immediately place this entry's dot1dBasePort or ifIndex into the given Policy Profile. This ob ...

etsysPortPolicyProfileOperID

This object is the current policy which is being applied to this entry's dot1dBasePort. A value of zero(0) indicates there is no policy being applied to this dot1dBasePort or this ifIndex. If the value of this object has been set by an underlying security ...

etsysPortPolicyProfileSummaryTable

This table provides aggregate port information on a per policy, per port type basis.

etsysPortPolicyProfileSummaryEntry

Conceptually defines a particular entry within the etsysPortPolicyProfileSummaryTable.

etsysPortPolicyProfileSummaryIndexType

This object defines the specific type of port this entry represents.

etsysPortPolicyProfileSummaryAdminID

An aggregate list of all Ports currently supporting rules which assign this profileIndex through administrative means. Rules of this type have a valid etsysPolicyRuleResult2 action and a profileIndex of 0.

etsysPortPolicyProfileSummaryOperID

An aggregate list of all Ports currently supporting rules which assign this profileIndex through either an administrative or dynamic means. The profileId which will be assigned operationally, as frames are handled are too be reported here.

etsysPortPolicyProfileSummaryDynamicID

An aggregate list of all Ports currently supporting rules which assign this profileIndex through a dynamic means. For example the profileIndex returned via a successful 802.1X supplicant authentication.

etsysStationPolicyProfileMaxEntries

The maximum number of entries allowed in the etsysStationPolicyProfileTable. If this number is exceeded, based on stations connecting to the edge device, the oldest entries will be deleted.

etsysStationPolicyProfileNumEntries

The current number of entries in the etsysStationPolicyProfileTable.

etsysStationPolicyProfileLastChange

sysUpTime at which the etsysStationPolicyProfileTable was last modified.

etsysStationPolicyProfileTable

This table allows for a one to one mapping between a station's identifying address and a Policy Profile.

etsysStationPolicyProfileEntry

Describes a particular entry within the etsysStationPolicyProfileTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets.

etsysStationPolicyProfileIndex

An index value which represents a unique station entry.

etsysStationIdentifierType

Indicates the type of station identifying address contained in etsysStationIdentifier.

etsysStationIdentifier

A value which represents a unique MAC Address, IP Address, or other identifying address for a station, or other logical and authenticatable sub-entity within a station, connected to a port.

etsysStationPolicyProfileOperID

This object is the current policy which is being applied to this entry's MAC Address. A value of zero(0) indicates there is no policy being applied to this MAC Address. The value of this object reflects either the setting from an underlying AAA service su ...

etsysStationPolicyProfilePortType

A textual convention that defines the specific type of port designator the corresponding entry represents.

etsysStationPolicyProfilePortID

A value which represents the physical port, of the type defined by this entry's etsysStationPolicyProfilePortType, on which the associated station entity is connected. This object is for convenience in cross referencing stations to ports.

etsysInvalidPolicyAction

Specifies the action that the edge device should take if asked to apply an invalid or unknown policy. applyDefaultPolicy(1) - Ignore the result and search for the next policy assignment rule. dropPackets(2) - Block traffic. forwardPackets(3) - ...

etsysInvalidPolicyCount

Increments to indicate the number of times the device has detected an invalid/unknown policy.

etsysDevicePolicyProfileDefault

If this value is non-zero, the value indicates the etsysPolicyProfileEntry (and its associated etsysPolicyClassificationTable entries) which should be used by the device if the device is incapable of using the profile (or specific parts of the profile) ex ...

etsysPolicyCapabilities

A list of capabilities related to policies. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indicates the described functionality is not supported.

etsysPolicyDynaPIDRuleCapabilities

A list of rule types which are supported by this device for the purpose of dynamically assigning a profile to the network traffic described by the bit. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the ...

etsysPolicyAdminPIDRuleCapabilities

A list of rule types which are supported by this device for the purpose of administratively assigning a profile to the network traffic described by the bit. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with ...

etsysPolicyVlanRuleCapabilities

A list of rule types which are supported by this device for the purpose of assigning a VlanId to the network traffic described by the bit. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indi ...

etsysPolicyCosRuleCapabilities

A list of rule types which are supported by this device for the purpose of assigning a CoS to the network traffic described by the bit. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indicat ...

etsysPolicyDropRuleCapabilities

A list of rule types which are supported by this device for the purpose of discarding the network traffic described by the bit. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indicates the d ...

etsysPolicyForwardRuleCapabilities

A list of rule types which are supported by this device for the purpose of forwarding the network traffic described by the bit. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indicates the d ...

etsysPolicySyslogRuleCapabilities

A list of rule types which are supported by this device for the purpose of issuing syslog messages when the rule is used to identify the network traffic described by the bit. A set bit, with the value 1, indicates support for the described functionality. ...

etsysPolicyTrapRuleCapabilities

A list of rule types which are supported by this device for the purpose of issuing an SNMP notify (trap) messages when the rule is used to identify the network traffic described by the bit. A set bit, with the value 1, indicates support for the described ...

etsysPolicyDisablePortRuleCapabilities

A list of rule types which are supported by this device for the purpose of disabling the ingress port identified when the rule matches the network traffic described by the bit. A set bit, with the value 1, indicates support for the described functionality ...

etsysPolicySupportedPortList

The list ports which support policy profile assignment (i.e. the ports which _do_ policy). This object may be useful to management entities which desire to scope action to only those ports which support policy. A port which appears in this list, must su ...

etsysPolicyEnabledTable

This table allows for the configuration of policy profile assignment methods, per port, including the ability to disable policy profile assignment, per port. In addition, a ports capabilities, with respect to policy profile assignment are reported.

etsysPolicyEnabledTableEntry

Describes a particular entry within the etsysPolicyEnabledTable.

etsysPolicyEnabledSupportedRuleTypes

The list of rule types which the devices supports for the purpose of assigning policy profiles to network traffic ingressing this dot1dBasePort.

etsysPolicyEnabledEnabledRuleTypes

The list of rule types from which the device will assign policy profiles to network traffic ingressing this dot1dBasePort. Rules which have a type not enumerated here must not be used to assign policy profiles, but must still be used to interrogate the ru ...

etsysPolicyEnabledEgressEnabled

Controls the enabling and disabling the application of policy as packets egress the switching process on the dot1dBasePort specified in the indexing.

etsysPolicyRuleAttributeTable

This table details each supported rule type attribute for rule data length in bytes, rule data length in bits, and the maximum number of rules that may use that type.

etsysPolicyRuleAttributeTableEntry

Describes a particular entry within the etsysPolicyRuleAttributeTable.

etsysPolicyRuleAttributeByteLength

This rule type's maximum length, in bytes of the etsysPolicyRuleData. Devices supporting this object MUST allow sets for this rule data of any valid length up to and including the length value represented by this object. Management entities must also exp ...

etsysPolicyRuleAttributeBitLength

This rule type's maximum bit length for traffic data. This value also represents the maximum mask that may be used for rule data. The mask MUST NOT exceed the rule data size. Masks that exceed the data size shall be considered invalid and result in an SNM ...

etsysPolicyRuleAttributeMaxCreatable

If this value is non-zero, the value indicates the maximum number of rules of this type the agent can support.

etsysPolicyRuleTciOverwriteCapabilities

A list of rule types which are supported by this device for the purpose of overwriting the TCI in received packets described by the bit. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indica ...

etsysPolicyRuleMirrorCapabilities

A list of rule types which are supported by this device for the purpose of mirroring the network traffic described by the bit. A set bit, with the value 1, indicates support for the described functionality. A clear bit, with the value 0, indicates the de ...

etsysPolicyMapMaxEntries

This has been obsoleted.

etsysPolicyMapNumEntries

This has been obsoleted.

etsysPolicyMapLastChange

This has been obsoleted.

etsysPolicyMapPvidOverRide

This has been obsoleted.

etsysPolicyMapUnknownPvidPolicy

This has been obsoleted.

etsysPolicyMapTable

This has been obsoleted.

etsysPolicyMapEntry

This has been obsoleted.

etsysPolicyMapIndex

This has been obsoleted.

etsysPolicyMapRowStatus

This has been obsoleted.

etsysPolicyMapStartVid

This has been obsoleted.

etsysPolicyMapEndVid

This has been obsoleted.

etsysPolicyMapPolicyIndex

This has been obsoleted.

etsysPolicyRulesMaxEntries

The maximum number of entries allowed in the etsysPolicyRulesTable.

etsysPolicyRulesNumEntries

The current number of entries in the etsysPolicyRulesTable.

etsysPolicyRulesLastChange

The sysUpTime at which the etsysPolicyRulesTable was last modified.

etsysPolicyRulesAccountingEnable

Controls the collection of rule usage statistics. If disabled, no usage statistics are gathered and no auditing messages will be sent. When enabled, rule will gather usage statistics, and auditing messages will be sent, if enabled for a given rule.

etsysPolicyRulesPortDisabledList

A portlist containing bits representing the dot1dBridgePorts which have been disabled via the mechanism described in the etsysPolicyRuleDisablePort leaf. A set bit indicates a disabled port. Ports may be enabled by performing a set with the corresponding ...

etsysPolicyRuleTable

A table containing rules bound to individual policies. A Rule is comprised of three components, a unique description of the network traffic, an associated list of actions, and an associated list of accounting and auditing controls and information. The un ...

etsysPolicyRuleEntry

Describes a particular entry within the etsysPolicyRuleTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets.

etsysPolicyRuleProfileIndex

The etsysPolicyProfileIndex for which the rule is defined. A value of zero(0) has special meaning in that it scopes rules which are used to determine the Policy Profile to which the frame belongs. See the etsysPolicyRuleResult1 and etsysPolicyRuleResult2 ...

etsysPolicyRuleType

The type of network traffic reference by the etsysPolicyRuleData.

etsysPolicyRuleData

The data pattern to match against, as defined by the etsysPolicyRuleType, encoded in network-byte order.

etsysPolicyRulePrefixBits

The relevant number of bits defined by the etsysPolicyRuleData, to be used when matching against a frame, relevant bits are specified in longest-prefix-first style (left to right). A value of zero carries the special meaning of all bits are relevant.

etsysPolicyRulePortType

The port number on which the rule will be applied. Zero(0) is a special case, indicating that the rule should be applied to all ports.

etsysPolicyRulePort

The port number on which the rule will be applied. Zero(0) is a special case, indicating that the rule should be applied to all ports.

etsysPolicyRuleRowStatus

The status of this row. When set to active(1) this entry's classification rule, as referenced by etsysPolicyRulesOID, becomes one of its associated policy's set of rules. When this entry's associated policy, as defined by etsysPolicyRuleProfileIndex, is a ...

etsysPolicyRuleStorageType

The storage type of this row. When set to volatile(1) this entry's classification rule, as referenced by etsysPolicyRulesOID, will be removed (if present) from non-volatile storage. Rows created dynamically by the device will typically report this as the ...

etsysPolicyRuleUsageList

When read, a set bit indicates that this rule was used to classify traffic on the corresponding port. When set, the native PortList will be bit-wise AND'ed with the set PortList, allowing the agent to clear the usage indication.

etsysPolicyRuleResult1

If the etsysPolicyRuleProfileIndex is 0 then this field is read-only and defines the profile ID which will assigned to frames matching this rule. This is the dynamically assigned value and may differ from the administratively configured value. If the ets ...

etsysPolicyRuleResult2

If the etsysPolicyRuleProfileIndex is 0 then this field is read-create and defines the profile ID which the managing entity desires assigned to frames matching this rule. This is the administrative value and may differ from the dynamically assigned activ ...

etsysPolicyRuleAuditSyslogEnable

Controls the sending of a syslog message when a bit in the etsysPolicyRuleUsageList transitions from 0 to 1.

etsysPolicyRuleAuditTrapEnable

Controls the sending of an SNMP NOTIFICATION when a bit in the etsysPolicyRuleUsageList transitions from 0 to 1.

etsysPolicyRuleDisablePort

Controls the disabling of a port (ifOperStatus of the corresponding ifIndex will be down) when a bit in the etsysPolicyRuleUsageList transitions from 0 to 1. When set to enabled, the corresponding ifIndex will be disabled upon the transition.

etsysPolicyRuleOperPid

If the etsysPolicyRuleProfileIndex is 0 then this field contains the currently applied profile ID for frames matching this rule. This may be either the administratively applied value or the dynamically applied value. If the etsysPolicyRuleProfileIndex is ...

etsysPolicyRuleOverwriteTCI

If set, the information contained within the TCI field of inbound, tagged packets will not be used by the device after the ingress classification stage of packet relay. The net effect will be that the TCI information may be used to classify the packet, b ...

etsysPolicyRuleMirrorIndex

A reference to a packet mirror destination (defined elsewhere). A value of (-1) indicates no mirror is specified, but a mirror is not explicitly prohibitted. A value of (0) indicates that mirroring is explicitly prohibitted, unless a high precedent rule h ...

etsysPolicyRulePortTable

The purpose of this table is to provide an agent the ability to easily determine which rules have been used on a given bridge port. A row will only be present when the rule which the instancing describes has been used. The agent may remove a row (and cle ...

etsysPolicyRulePortEntry

.

etsysPolicyRulePortHit

Every row will report a value of True, indicating that the Rule described by the instancing was used on the given port. An agent may be set this leaf to False to clear remove the row and clear the Rule Use bit for the specified Rule, on the given bridgeP ...

etsysPolicyRuleDynamicProfileAssignmentOverride

If true, administratively assigned profile assignment rules override dynamically assigned profiles assignments for a given rule. If false, the dynamically assigned value (typically created by a successful authentication attempt) overrides the administrat ...

etsysPolicyRuleDefaultDynamicSyslogStatus

If enabled(1), rules dynamically created will set etsysPolicyRuleAuditSyslogEnable to enabled. If disabled(2) a dynamically created rule will have etsysPolicyRuleAuditSyslogEnable set to disabled. The agent may optionally implement this leaf as read-only ...

etsysPolicyRuleDefaultDynamicTrapStatus

If enabled(1), rules dynamically created will set etsysPolicyRuleAuditTrapEnable to enabled. If disabled(2) a dynamically created rule will have etsysPolicyRuleAuditTrapEnable set to disabled. The agent may optionally implement this leaf as read-only.

etsysPolicyRuleStatsAutoClearOnLink

If set to enabled(1), when operstatus up is detected on any port the agent will clear the rule usage information associated with that port. This ability is further scoped to the list of ports defined by etsysPolicyRuleStatsAutoClearPorts. This leaf is opt ...

etsysPolicyRuleStatsAutoClearInterval

The interval at which the device will automatically clear rule usage statistics, in minutes. This ability is disabled (usage statistics will not be automatically cleared) if set to zero(0). This ability is further scoped to the list of ports defined by e ...

etsysPolicyRuleStatsAutoClearPorts

The list ports on which rule usage statistics will be cleared by one of the AutoClear actions (etsysPolicyRuleStatsAutoClearInterval, etsysPolicyRuleStatsAutoClearOnProfile, or etsysPolicyRuleStatsAutoClearOnLink). By default, no ports will be set in thi ...

etsysPolicyRuleStatsAutoClearOnProfile

If set to enabled(1), when a rule assigning a PolicyProfile (whose etsysPolicyRuleProfileIndex is zero(0)) is activated, all the rule usage bits associated with the rules bound to the PolicyProfile specified by the etsysPolicyRuleOperPid and the port spec ...

etsysPolicyRuleStatsDroppedNotifications

A count of the number of times the agent has dropped notification (syslog or trap) of a etsysPolicyRuleUsageList bit transition. A management entity might use this leaf as an indication to read the etsysPolicyRuleUsageList objects for important rules. T ...

etsysPolicyRuleSylogMachineReadableFormat

If enabled, the device should format rule usage messages so that they might be processed by a machine (scripting backend, etc). If disabled, the messages should be formatted for human consumption.

etsysPolicyRuleSylogExtendedFormat

If enabled, the device should provide additional information in rule-hit syslog messages. This information MAY include what actions may have been initiated by the rule (if any) or data mined from the packet which matched the rule.

etsysPolicyRuleSylogEveryTime

If enabled, the device will syslog on every rule hit (or profile hit) which specifies SYSLOG as the action, instead of only when the associated bit in the etsysPolicyProfileUsageList or the etsysPolicyRuleUsageList is clear. It should be noted that this m ...

etsysPolicyRFC3580MapResolveReponseConflict

Indicates which field to use in the application of the RADIUS response in the event that both the proprietary filter-id indicating a policy profile and the standard (RFC3580) vlan- tunnel-attribute are present. If policyProfile(1) is selected, then the f ...

etsysPolicyRFC3580MapLastChange

The value of sysUpTime when the etsysPolicyRFC3580MapTable was last modified.

etsysPolicyRFC3580MapTableDefault

If read as True, then the etsysPolicyRFC3580MapTable is in the default state (no mappings have been created), if False, then non-default mappings exist. If set to True, then the etsysPolicyRFC3580MapTable will be put into the default state (no mappings wi ...

etsysPolicyRFC3580MapTable

A table containing VLAN ID to policy mappings. A policy is a group of classification rules which may be applied on a per user basis, to ports or to stations.

etsysPolicyRFC3580MapEntry

Conceptually defines a particular entry within the etsysPolicyRFC3580MapTable. Entries within this table MUST be considered non-volatile and MUST be maintained across entity resets.

etsysPolicyRFC3580MapVlanId

The VlanIndex which will map to the policy profile specified by the etsysPolicyRFC3580MapPolicyIndex of this row. This will be used to map the VLAN returned by value from the Tunnel- Private-Group-ID RADIUS attribute.

etsysPolicyRFC3580MapPolicyIndex

The index of a Policy Profle as defined in the etsysPolicyProfileTable. A value of 0 indicates that the row is functionally non- operational (no mapping exists). Devices which support the ENTERASYS-VLAN-AUTHORIZATION-MIB, and for which the value of etsys ...

etsysPolicyRFC3580MapInvalidMapping

Increments to indicate the number of times the device has detected an invalid/unknown EtsysPolicyRFC3580MapEntry (i.e. one that references an in-active or non-existent etsysPolicyProfile).

etsysPolicyProfileGroup

A collection of objects providing Policy Profile Creation.

etsysPolicyClassificationGroup

A collection of objects providing a mapping between a set of Classification Rules and a Policy Profile.

etsysPortPolicyProfileGroup

A collection of objects providing a mapping from a specific port to a Policy Profile instance. Only the read-only portions of this group are now current. They are listed under etsysPortPolicyProfileGroup2.

etsysStationPolicyProfileGroup

A collection of objects providing a mapping from a specific station to a Policy Profile instance.

etsysInvalidPolicyPolicyGroup

A collection of objects that help to define a mapping from logical authorization services outcomes to access control and policy actions.

etsysDevicePolicyProfileGroup

An object that provides a device level supplemental policy for entities that are not able to apply portions of the profile definition uniquely on individual ports.

etsysPolicyCapabilitiesGroup

An object that indicates the capabilities of the managed entity with respect to Policy Profiles.

etsysPolicyMapGroup

This object group has been obsoleted.

etsysPolicyRulesGroup

An object that indicates the capabilities of the managed entity with respect to Policy Profiles.

etsysPortPolicyProfileGroup2

A collection of objects providing a mapping from a specific port to a Policy Profile instance.

etsysPolicyRFC3580MapGroup

An object group that provides support for mapping between RFC 3580 style VLAN-policy and Enterasys UPN-policy based on named roles.

etsysPolicyCapabilitiesGroup2

An object that indicates the capabilities of the managed entity with respect to Policy Profiles and defines the characteristics of policy rule data by rule type.

etsysPolicyRulesGroup2

********* THIS GROUP IS DEPRECATED ********** An object that indicates the capabilities of the managed entity with respect to Policy Profiles.

etsysPolicyRulesGroup3

An object that indicates the capabilities of the managed entity with respect to Policy Profiles.

etsysPolicyRulesGroup4

An object that indicates the capabilities of the managed entity with respect to Policy Profiles.

etsysPolicyCapabilitiesGroup3

An object that indicates the capabilities of the managed entity with respect to Policy Profiles and defines the characteristics of policy rule data by rule type.

etsysPolicyProfileGroup2

A collection of objects providing Policy Profile Creation.

etsysPolicyRulesGroup5

An object that indicates the capabilities of the managed entity with respect to Policy Profiles.

etsysPolicyCapabilitiesGroup4

An object that indicates the capabilities of the managed entity with respect to Policy Profiles and defines the characteristics of policy rule data by rule type.

etsysPolicyProfileGroup3

A collection of objects providing Policy Profile Creation.