The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for port cable
- wsm Port Cable Type
- wsmPortCableType 1.3.6.1.4.1.800.2.7.1.1.1.4 (defined in XYLAN-WSM-MIB)
The type of cable attached to the universal serial port. Non Universal Serial Ports will always return 'unknown'. NOTE: RS-449 cables will return as RS-530 as they are detected as the same type. RS-449 is implemented only as a different connector (DB-37 instead of DB-25) on the end of the cable. - qsim Port Cable Type
- qsimPortCableType 1.3.6.1.4.1.43.1.12.3.1.1.12.2.1.1.2 (defined in 3comab9300)
Type of cable connected to the port. - cbr V35 Port Configuration Cable Type
- cbrV35PortConfCableType 1.3.6.1.4.1.43.1.12.3.1.1.15.5.1.1.1 (defined in 3comab9300)
This object indicates the type of cable connected to the port. An error is returned if an access is attempted on a physical interface other than a V.35 port interface. The default value is none (1). - cbr V35 Port Configuration Cable ID
- cbrV35PortConfCableID 1.3.6.1.4.1.43.1.12.3.1.1.15.5.1.1.10 (defined in 3comab9300)
This object indicates the type of physical interface. - Cisco Cable Metering Collection Port
- ccmtrCollectionPort 1.3.6.1.4.1.9.9.424.1.1.3.1.4 (defined in CISCO-CABLE-METERING-MIB)
The port number of the collection server. This port number chosen should not be any of the well defined ports. The ccmtrCollectionIpAddress should be also valid along with ccmtrCollectionPort for a row to be created. The primary collection server port represented by ccmtrCollectionID equal to 1 must be created before the secondary collection server port. - Cisco Cable WIDEBAND RF Chan Qam Udp Port
- ccwbRFChanQamUdpPort 1.3.6.1.4.1.9.9.479.1.2.1.4 (defined in CISCO-CABLE-WIDEBAND-MIB)
The port number on the edge QAM associated with this RF channel. - Cisco Cable WIDEBAND Fiber Node WBRF Port
- ccwbFiberNodeWBRFPort 1.3.6.1.4.1.9.9.479.1.9.1.5 (defined in CISCO-CABLE-WIDEBAND-MIB)
This object represents the RF downstream channel IDs (rf-ports) of the wideband controller card. Each Wideband controller can have 24 RF channels. ccwbFiberNodeWBRFPort and ccwbFiberNodeWBContlrPhyIndx are mutually inclusive.
