The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for port duplex
- tsm Admin Port Duplex
- tsmAdminPortDuplex 1.3.6.1.4.1.800.2.19.1.1.1.1.9 (defined in TSMEXT-MIB)
The configured duplex mode of the port. 1 = auto. Automatically set the port's duplex mode. 2 = halfDuplex. Alway run the port in half duplex mode. 3 = fullDuplex. Alway run the port in full duplex mode. This object may ONLY be set if the value of port's tsmAdminPortConfigType is fixed(1). - tsm Operation Port Duplex
- tsmOperPortDuplex 1.3.6.1.4.1.800.2.19.1.2.1.1.9 (defined in TSMEXT-MIB)
The configured duplex mode of the port. 1 = auto. The port has not yet automatically set the port's duplex mode. 2 = halfDuplex. 3 = fullDuplex. - els100 Port Duplex Status
- els100PortDuplexStatus 1.3.6.1.4.1.52.1011.2.1.3 (defined in ctels100-ng-mib)
The duplex status of the port, either half duplex or full duplex. - switch Port Duplex
- switchPortDuplex 1.3.6.1.4.1.52.259.10.3.4.1.1.1.5 (defined in elh100-mib)
The duplex mode in which the switch port is currently operating. If the port is inactive (port 2 on media modules and port 3 on internal switch modules), notApplicable(3) is returned. - port Bsci Admin Full Duplex
- portBsciAdminFullDuplex 1.3.6.1.4.1.173.7.3.4.1.1.15 (defined in netlink-specific-mib)
Specifies full-duplex transmission. - port Bsci Operation Full Duplex
- portBsciOperFullDuplex 1.3.6.1.4.1.173.7.3.4.2.1.15 (defined in netlink-specific-mib)
Specifies full-duplex transmission. - port Sdlc Admin L1 Duplex
- portSdlcAdminL1Duplex 1.3.6.1.4.1.173.7.3.5.1.1.16 (defined in netlink-specific-mib)
This object determines whether level-1 (physical layer) transmission can be in one (half duplex) or both (full duplex) directions at once. - port Sdlc Operation L1 Duplex
- portSdlcOperL1Duplex 1.3.6.1.4.1.173.7.3.5.2.1.15 (defined in netlink-specific-mib)
This object determines whether level-1 (physical layer) transmission can be in one (half duplex) or both (full duplex) directions at once. - Cisco 2900 Port Duplex State
- c2900PortDuplexState 1.3.6.1.4.1.9.9.87.1.4.1.1.31 (defined in CISCO-C2900-MIB)
Set to fullduplex(1) to operate in full duplex mode, port will allow simultaneous transmit and receive which can double its bandwidth. Set to halfduplex(2) to operate in half duplex mode. Set to autoNegotiate(3) to allow the switch to negoti- ate with the other end of the connection. The status of duplex mode on a port is available with c2900PortDuplexStatus object. - Cisco 2900 Port Duplex Status
- c2900PortDuplexStatus 1.3.6.1.4.1.9.9.87.1.4.1.1.32 (defined in CISCO-C2900-MIB)
The status of duplex mode on this port. When linkbeat is not present, halfduplex is always reported. When linkbeat is present, the result of full duplex auto-negotiation is reported if c2900PortDuplexState is set to auto-negotiate, otherwise it reports fullduplex if c2900PortDuplexState is set to fullduplex or halfduplex if c2900PortDuplexState is set to halfduplex. - Cisco Network Office Switch Port Duplex Admin
- cnosPortDuplexAdmin 1.3.6.1.4.1.9.10.43.1.3.1.1.3 (defined in CISCO-CNO-SWITCH-MIB)
Set to fullDuplex(1) to operate in full duplex mode: port will allow simultaneous transmit and receive which can double its bandwidth. Set to halfDuplex(2) to operate in normal mode. Set to autoNegotiate(3) to allow the switch to negotiate with the other end of the connection. - Cisco Network Office Switch Port Duplex Status
- cnosPortDuplexStatus 1.3.6.1.4.1.9.10.43.1.3.1.1.4 (defined in CISCO-CNO-SWITCH-MIB)
The operating duplex mode of the switched port.
