The objects described here can be monitored with the IPHost Network Monitor.
You can start SNMP monitoring using free 30-day trial version of IPHost right now.
OID list for ups status
- ups Battery Status
- upsBatteryStatus 1.3.6.1.2.1.33.1.2.1 (defined in rfc1628)
The indication of the capacity remaining in the UPS system's batteries. A value of batteryNormal indicates that the remaining run-time is greater than upsConfigLowBattTime. A value of batteryLow indicates that the remaining battery run-time is less than or equal to upsConfigLowBattTime. A value of batteryDepleted indicates that the UPS will be unable to sustain the present load when and if the utility power is lost (including the possibility that the utility power is currently absent and the UPS is unable to sustain the output). - ups Config Audible Status
- upsConfigAudibleStatus 1.3.6.1.2.1.33.1.9.8 (defined in rfc1628)
The requested state of the audible alarm. When in the disabled state, the audible alarm should never sound. The enabled state is self-describing. Setting this object to muted(3) when the audible alarm is sounding shall temporarily silence the alarm. It will remain muted until it would normally stop sounding and the value returned for read operations during this period shall equal muted(3). At the end of this period, the value shall revert to enabled(2). Writes of the value muted(3) when the audible alarm is not sounding shall be accepted but otherwise shall have no effect. - Compaq Storage System Power Supply Ups Status
- cpqSsPowerSupplyUpsStatus 1.3.6.1.4.1.232.8.2.2.3.1.5 (defined in CPQSTSYS)
Compaq Storage System Power Supply Uninterruptible Power Supply (UPS) Status. The following values are defined: other(1) The agent is unable to determine if this power supply is attached to an Uninterruptible Power Supply (UPS). noUps(2) No UPS is attached to the power supply. ok(3) A UPS is attached to the power supply and is operating normally. powerFailed(4) A UPS is attached to the power supply and the AC power has failed. batteryLow(5) A UPS is attached to the power supply, the AC power has failed and the UPS battery is low. - Compaq Ups Line Status
- cpqUpsLineStatus 1.3.6.1.4.1.232.12.2.2.1 (defined in CPQUPS)
The status of the AC line input to the UPS.
