CISCO-ATM-TRUNK-MIB Download
The MIB for voice and Nx64 over ATM Trunking applications.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-ATM-TRUNK-MIB
- catmtCidTable
- This table is used to establish the mapping of one or more DS0 channels from a single DS1 interface to an AAL2 connection identified by a Channel IDentification number(CID). This table is created and used for ATM AAL2 trunking applications including both ...
- catmtCidDs1
- The value of this object equals to the 'ifIndex' of the DS1 interface. This object is mandatory when adding a CID entry. Once a CID entry is added, this object can not be modified. ::= { catmtCidEntry 4 } SYNTAX Integer32 (0..30) MAX-ACCESS re ...
- catmtCidVoiceCodec
- This object specifies the CODEC type used for the AAL2 trunking connection. The following table lists the CODEC types specified in each profile table by ITU I.366.2 standard. ---------------------------------------------------- Profile Profile ...
- catmtCidRepetition
- This object is used to repeatedly apply the writable objects of catmtCidTable specified in the same SNMP PDU starting from the row defined by the index object for the number of rows specified by this object. The repetition operation works differently for ...
- catmtCidExtRAICnts
- This object contains the number of external RAI AAL2 Type3 packets received. External RAI is transmitted upstream from an entity that has detected defects persisting long enough to constitute a received signal failure. External RAI is to report in the bac ...
- catmtCidConnAISCnts
- This object contains the number of external connection AIS AAL2 packets received. External Conn AIS is a Alarm Indicating Signal transmitted in the downstream direction from the AAL2 connecting point that first detects the defect affecting the AAL2 connec ...
- catmtCidConnRDICnts
- This object contains the number of external connection RDI AAL2 packets received. External Connection RDI - is a signal transmitted in the upstream direction by an AAL2 endpoint that is in alarm state, as the result of having received an AAL2 connection ...
- catmtCidNx64FramesTxToTDM
- This object contains the number of frames transmitted to the TDM interface. This object is only applicable when catmtCidNx64Mode is set to to 'hdlc'. ::= { catmtCidStatsEntry 11 } SYNTAX Counter32SinceReset MAX-ACCESS read-only STATUS curren ...
- catmtAal5Vci
- This object is the VCI value of an ATM PVC connection.
- catmtAal5Ds1
- The value of this object equals to the 'ifIndex' of the DS1 interface. This object is mandatory when adding an AAL5 entry. Once an AAL5 entry is added, this object can not be modified. ::= { catmtAal5Entry 3 } SYNTAX Integer32 (0..30) MAX-ACCESS r ...
- cAtmTrunkCidMIBGroup
- This group contains objects related to ATM AAL2 trunking CID level parameters.
- cAtmTrunkAal1MIBGroup
- This group contains objects related to ATM AAL1 trunking parameters.
- cAtmTrunkAal5MIBGroup
- This group contains objects related to ATM AAL5 trunking parameters.
- cAtmTrunkCidConnStatsMIBGroup
- This group contains objects for AAL2 bearer connection statistics information used for ATM AAL2 trunking.
- cAtmTrunkAal1ConnStatsMIBGroup
- This group contains objects for AAL1 connection statistics information used for ATM AAL1 trunking.
- cAtmTrunkAal5ConnStatsMIBGroup
- This group contains objects for AAL5 bearer connection statistics information used for ATM AAL5 trunking.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
