CISCO-DIST-DIRECTOR-MIB Download

cddGeneralMetricProfTable

This table contains a list of metric profiles. A profile can be identified by the index cddGeneralMetricProfId. When a profile's identifier is assigned to an object whose syntax is CddMetricProfileId or CddMetricProfileIdOrZero, all priority and weight va ...

cddGeneralMetricProfEntry

An entry containing the priority and weight values for a metric in a metric profile. Each entry is associated with a specific metric profile identifier and metric type combination. A profile consists of all entries that have the same cddGeneralMetricProfI ...

cddGeneralMetricProfId

The identifier of a metric profile.

cddGeneralMetricProfMetric

The type of a metric in the profile.

cddGeneralMetricProfPriority

The priority value of the metric in the profile.

cddGeneralMetricProfWeight

The weight value of the metric in the profile.

cddGeneralMetricProfRowStatus

The status of the row. This object is used to create a new row or delete an existing row in this table.

cddGeneralQueries

The total number of requests for information the Distributed Director has received. They include DNS queries and HTTP requests for all virtual host names or subdomains.

cddGeneralReplies

The total number of requests for information the Distributed Director has processed. They include DNS queries and HTTP requests for all virtual host names or subdomains.

cddGeneralQueueProcess

The current number of DNS queries and HTTP requests in the queue to be processed by the Distributed Director.

cddGeneralQueueMetric

The current number of outstanding DNS queries and HTTP requests being held until metric information (e.g., DRP internal and DRP external metrics) arrives.

cddGeneralMetricWaitMin

The minimum time DNS/HTTP queries/requests are held before the metric information is processed by the Distributed Director.

cddGeneralMetricWaitAvg

The average time DNS/HTTP queries/requests are held before the metric information is processed by the Distributed Director.

cddGeneralMetricWaitMax

The maximum time DNS/HTTP queries/requests are held before the metric information is processed by the Distributed Director.

cddGeneralCacheHits

Represents the total number of DNS queries and HTTP requests that were satisfied with contents of the Distributed Director cache.

cddGeneralCacheEnable

This object enables/disables the sorting cache on the Distributed Director.

cddGeneralCacheTime

Specifies the minimum amount of time the Distributed Director will retain request and response information to DNS/HTTP queries/requests. This object is not applicable if the value of the cddGeneralCacheEnable object is 'false'.

cddGeneralTTL

Specifies the time-to-live value for the DNS resource records returned by the Distributed Director.

cddGeneralDefPriorityWeight

Specifies the identifier of a metric profile that is used as the default metric priority and weight values for the Distributed Director. The value '0' indicates that no profile is used as the default priority and weight values.

cddGeneralQueryRate

The received DNS/HTTP queries/requests rate in the last one second period.

cddGeneralAccessList

Indicates the access list that is assigned to the Distributed Director. The access list is a case- insensitive regular expression that is used to match against DNS name to address translation requested. If the DNS name in the query matches the access list ...

cddHostTable

A list of Distributed Director virtual host name or subdomain specific configurations, statistics and status entries.

cddHostEntry

An entry containing configurations, statistics and status information for the specified combination of virtual host name/subdomain and query type. Entries in this table may be queried, created or deleted by NMS. Deleting an entry from this table will caus ...

cddHostName

The name of a virtual host or subdomain.

cddHostQueryType

The type of DNS query for which this host entry information would be used. Currently only query type 'A(1)', 'NS(2)', and 'MX(15)' are supported.

cddHostServicePort

The service port number for the specified combination of virtual host name and query type. Setting this object to the value '0' will disable the usage of the service port.

cddHostPriorityWeight

Specifies the identifier of a metric profile. The priority and weight values for all metrics in the profile are assigned to the specified combination of virtual host name and query type. The value '0' indicates that no profile is assigned to the combinati ...

cddHostDrpMed

Enables/disables the drp-med option. The drp-med option enables the DD to use the BGP MED attribute in redirection decisions in cases where there is more than one DRP agent in the same autonomous system and at least two of the DRP agents point to differen ...

cddHostDrpRttProbes

The number of round-trip time probes that the DRP agent should attempt.

cddHostDrpRttTol

The tolerance percentage value for the drp-rtt metric. If two drp-rtt metrics are within the tolerance percentage of each other in value, they should be assumed to be tied.

cddHostAccessControl

Enables/disables the use of access control lists when sorting IP addresses for this hostname. In access control mode, if the IP address of a client is not permitted by the access list associated with a server, that server is removed from selection.

cddHostMultipleRecord

Specifies the maximum number of DNS resource records that can be returned to DNS clients. For the value '1' of this object, the Distributed Director only returns the 'best' server's IP address in a DNS reply. This object can be used to specify that multip ...

cddHostLogging

Specifies if the DNS/HTTP request/response and server selection process are logged via 'syslog' facility. The severity 'info(7)' is used for logging 'syslog' messages.

cddHostUrlString

Specifies the URL that is used by the Distributed Director to determine remote server's availability by connecting to the host service port and attempting to retrieve a web page.

cddHostUrlIntv

Specifies the duration between two service availability checking processes. The Distributed Director checks the service availability periodically by connecting to the host service port for retrieving a web page with the time duration value of this object. ...

cddHostRequests

The number of DNS/HTTP queries/requests the Distributed Director has received for the combination of virtual host name and query type.

cddHostReplies

The number of DNS/HTTP queries/requests the Distributed Director has processed for the combination of virtual host name and query type.

cddHostRowStatus

The status of the row. This object is used to create a new row or delete an existing row in this table.

cddHostConnectCfgTable

A list of Distributed Director per-host server connect test information entries. This information includes the configuration parameters used by Distributed Director's server connect tests.

cddHostConnectCfgEntry

A Distributed Director per-host server connect test configuration information entry, which specifies whether and how a TCP connect test should be performed for each server associated with this host. Entries in this table may be queried, created or deleted ...

cddHostConnectCfgPort

A port number, to which a TCP connect test should be performed for each server associated with this host.

cddHostConnectCfgIntv

The connect test interval, which is used for empirical verification that the service is available on the port. Setting this object to the value '0' will disable the server connect test on the port for this host.

cddHostConnectCfgRowStatus

The status of the row. This object is used to create a new row or delete an existing row in this table.

cddHostTolCfgTable

A list of Distributed Director per-host priority level metrics tolerance information entries.

cddHostTolCfgEntry

An entry containing Distributed Director per-host metrics tolerance information at a priority level. If at a priority level two or more remote servers have metric values that are within a certain tolerance percentage of each other, they are considered to ...

cddHostTolCfgPrio

Specifies the metrics tolerance priority level for the host.

cddHostTolCfgPerc

Specifies the metrics tolerance percentage value associated with the priority level.

cddHostTolCfgRowStatus

The status of the row. This object is used to create a new row or delete an existing row in this table.

cddServerTable

A list of Distributed Director server specific information entries. This information includes the configuration parameters, statistics and availability status for each server.

cddServerEntry

An entry containing Distributed Director server specific configuration, statistics and status information. Entries in this table may be queried, created or deleted by NMS. Deleting an entry from this table will cause associated entries in the dependent ta ...

cddServerAddrType

The type of IP address for the cddServerAddr object. Only the support for the value 'ipv4(1)' is required.

cddServerAddr

The IP address of a server that is associated with a virtual host name.

cddServerDrpAddrType

The type of IP address for the cddServerDrpAddr object.

cddServerDrpAddr

The IP address of the Director Response Protocol (DRP) agent that supports this server.

cddServerAdmin

The administrative preference metric value for the server. It specifies the preference of one server over another (the larger the number, the lower the preference). Setting this object to the value '0' will take the server out-of-service. Setting this obj ...

cddServerPortion

Specifies the portion metric value for the server.

cddServerName

The host name that will be used in the URL instead of the server's IP address if this server is selected while in HTTP redirector mode.

cddServerAvail

The default availability metric value for all ports on the server. This value is used if the DFP reported availability value is found to have timed out, or has not been reported yet, or if the associated port for the virtual hostname has not been configur ...

cddServerHits

The number of times this server has been advertised as the best server for the subdomain or host name.

cddServerLastHitTime

The last time the server was advertised as the best server for the subdomain name or host name.

cddServerDrpSerMetric

Indicates the DRP server metric value of the server.

cddServerPortionHits

The number of times this server has been advertised as the best server due to the server specific portion metric.

cddServerAccessList

Indicates the access list that is used to verify if this server should be selectable as a valid choice for a particular client. This list will only be checked if the access control is turned on for the hostname being looked up. The value '0' indicates tha ...

cddServerRowStatus

The status of the row. This object is used to create a new row or delete an existing row in this table.

cddServerPortTable

A list of Distributed Director server port specific information entries. This information includes the configuration parameters, statistics and availability status for each service port on servers.

cddServerPortEntry

An entry containing Distributed Director server port specific configuration, statistics and status information. Entries in this table may be queried, created or deleted by NMS. Deleting an entry from this table will cause associated entries in the depende ...

cddServerPortNum

The service port number of the server.

cddServerPortAdmin

The administrative preference metric value for the server and the port. It specifies the preference of one server over another (the larger the number, the lower the preference). Setting this object to the value '0' will take the server out-of-service. Set ...

cddServerPortConnIntv

The connect test interval, which is used for empirical verification that the service is available on this port of the server. Setting this object to the value '0' will disable the server connect test on this port of the server.

cddServerPortPortion

The portion metric value for the port of the server. Setting this object to the value '0' will disable the usage of this 'per-service' metric, and the less specific 'per-server' metric value will be used instead.

cddServerPortAvail

The default DFP availability metric value for the port of the server. This value is used if the DFP reported availability value is found to have timed out, has not been reported yet, or if the associated port for the virtual hostname has not been configur ...

cddServerPortUrlString

Specifies the URL that is used by the Distributed Director to determine remote server's availability by connecting to the port of the server and attempting to retrieve a web page.

cddServerPortUrlIntv

Specifies the duration between two service availability checking processes. The Distributed Director checks the service availability periodically by connecting to the port of the server for retrieving a web page with the time duration value of this object ...

cddServerPortHits

The number of times the server has been advertised as the best server for the service provided on the port.

cddServerPortStatus

Indicates whether the port service is available or not. The possible service statuses are as follows: undetermined - the service was not tested or the service state can't be determined. up - the service is known to be available. down - t ...

cddServerPortDownCertainty

Indicates the percentage of the downed port service possibility. This value is applicable only if the value of cddServerPortStatus is 'down'.

cddServerPortNextRetry

The amount of time left before the next checking of port service availability starts. If the checking of service availability is proceeding, this object has the value '0'.

cddServerPortPortionHits

The number of times this server has been advertised as the best server due to the server port specific portion metric.

cddServerPortAccessList

Indicates the per-port access list that is used to verify if this server should be selectable as a valid choice for a particular client. This list will only be checked if the access control is turned on for the hostname being looked up. If this object has ...

cddServerPortRowStatus

The status of the row. This object is used to create a new row or delete an existing row in this table.

cddServerPortMetricTable

A list of Distributed Director per-service per-metric weight entries.

cddServerPortMetricEntry

An entry containing Distributed Director per-service per-metric weight information. Entries in this table may be queried, created or deleted by NMS. Each entry in this table is dependent on entries in cddServerTable and cddServerPortTable. If the associat ...

cddServerPortMetricType

The type of the metric to which the per-service per-metric weight applies. When this metric is referenced with respect to this server and port, the metric's value will be multiplied by the weight given. For example, if one remote server is known to be abl ...

cddServerPortMetricWeight

The per-service per-metric weight for the metric. If this object has the value of '0', the host specific weight for the metric will be used instead.

cddServerPortMetricRowStatus

The status of the row. This object is used to create a new row or delete an existing row in this table.

cddHostServerMappingTable

This table contains zero or more rows of virtual hostname and query type combination to real server associations. For each virtual hostname and query type combination, there are zero or more real servers associated with it. One real server may be associat ...

cddHostServerMappingEntry

An entry containing a particular virtual hostname and query type combination to real server association information.

cddHostServerMappingServerAddrType

The type of IP address for the cddHostServerMappingServerAddr object. Only the support for the value 'ipv4(1)' is required.

cddHostServerMappingServerAddr

The IP address of one of the servers associated with the combination of the virtual host name and query type.

cddHostServerMappingRowStatus

The status of the row. This object is used to create a new row or delete an existing row in this table.

ciscoDistDirGeneralGroup

A collection of objects providing Distributed Director general configurations, statistics and status.

ciscoDistDirHostGroup

A collection of objects providing Distributed Director per virtual hostname configurations, statistics and status.

ciscoDistDirServerGroup

A collection of objects providing Distributed Director per server configurations, statistics and status.

ciscoDistDirMappingGroup

A collection of object(s) providing the associations between virtual hostnames and real servers.