CISCO-DSPU-MIB Download
Used to define and manage DSPU objects.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-DSPU-MIB
- dspuNodeRsrb
- RSRB feature enabled/disabled for the DSPU node. TRUE -> RSRB feature enabled FALSE -> RSRB feature disabled If the RSRB feature is enabled, the following object values must be valid (i.e. non-zero): - dspuNodeRsrbLocalVirtualRing - dspuNodeRsrbBridgeNum ...
- dspuNodeRsrbLocalVirtualRing
- Local virtual ring number used by the DSPU node. LocalVirtualRing is zero if RSRB is not enabled.
- dspuNodeRsrbBridgeNumber
- Bridge number connecting the DSPU LocalVirtualRing with the RSRB TargetVirtualRing. Currently, the only valid BridgeNumber supported is 1. BridgeNumber must be one if RSRB is enabled. BridgeNumber is zero if RSRB is not enabled.
- dspuNodeRsrbTargetVirtualRing
- Target virtual ring number used for RSRB. TargetVirtualRing is zero if RSRB is not enabled.
- dspuNodeRsrbVirtualMacAddress
- Virtual MAC address of the the DSPU node. VirtualMacAddress is zero if RSRB is not enabled.
- dspuNodeDefaultPu
- Default-PU feature enabled/disabled for the DSPU node. TRUE -> Default-PU feature enabled FALSE -> Default-PU feature disabled
- dspuNodeDefaultPuWindowSize
- Send/receive window size to be used across the link between the default-PU and a remote PU.
- dspuNodeDefaultPuMaxIframe
- Maximum size of an I-frame that can be transmitted/received across the link between the default-PU and a remote PU.
- dspuNodeActivationWindow
- Activation pacing window used by the DSPU node to limit the number of activation RUs sent for a given SAP before waiting for responses from the remote.
- dspuNodeLastConfigChgTime
- Timestamp of last change to DSPU configuration parameters. LastConfigChgTime reflects any change in DSPU configuration.
- dspuPoolClassTable
- Table listing defined pool classes for the DSPU node. A pool class is defined at the DSPU node as a pool of upstream LUs that may be shared among downstream PUs. Each entry in the table represents a separate pool class definition. Entries in the table may ...
- dspuPoolClassEntry
- Each entry represents a defined pool class.
- dspuPoolClassIndex
- Index of a pool class entry in the dspuPoolClassTable.
- dspuPoolClassName
- Name identifier of the pool class.
- dspuPoolClassInactivityTimeout
- Value (in minutes) of the inactivity timeout that will be applied to active LU sessions assigned from the pool class. The inactivity timeout feature for pooled LUs is disabled if the InactivityTimeout value is zero.
- dspuPoolClassOperUpStreamLuDefs
- Number of upstream LUs defined in the pool class.
- dspuPoolClassOperDnStreamLuDefs
- Number of downstream LUs defined in the pool class.
- dspuPooledLuTable
- Table listing all LUs defined in a specified pool class. The entries in the table provide information such that the downstream LUs in the pool can be correlated with the upstream LUs to which they may be assigned and vice versa. If all upstream LUs have b ...
- dspuPooledLuEntry
- Each entry represents an LU that is defined as a member of the specified pool class.
- dspuPooledLuPeerPuIndex
- Index (dspuPuOperIndex) of the peer PU that owns the peer LU. PeerPuIndex is zero if peer LU has not been assigned.
- dspuPooledLuPeerLuLocalAddress
- NAU address (dspuLuOperLuLocalAddress) of the peer LU. PeerLuLocalAddress is zero if peer LU has not been assigned.
- dspuPuAdminTable
- Table listing all defined upstream/downstream PUs that are owned by the DSPU node. NOTE: The dspuPuAdminTable does not include default downstream PUs that may be dynamically created.
- dspuPuAdminEntry
- Each entry represents a defined upstream/downstream PU.
- dspuPuAdminIndex
- Index of the PU entry in the dspuPuAdminTable.
- dspuPuAdminName
- Name of the PU.
- dspuPuAdminType
- PU Type is either upstream or downstream.
- dspuPuAdminRemoteMacAddress
- MAC address of the remote PU.
- dspuPuAdminRemoteSapAddress
- SAP address of the remote PU.
- dspuPuAdminLocalSapAddress
- SAP address of the local PU.
- dspuPuAdminXid
- Upstream PU : XID that will be sent to the remote PU. Dnstream PU : XID that must be received from the remote PU.
- dspuPuAdminXidFmt
- Type of XID format used during activation of the link between this dspuNode and the remote PU.
- dspuPuAdminWindowSize
- Send/Receive window size to be used across the link between this dspuNode and the remote PU.
- dspuPuAdminMaxIframe
- Maximum size of an I-frame that can be transmitted/received across the link between this dspuNode and the remote PU.
- dspuPuAdminLinkRetryCount
- Number of times that the DSPU node will attempt to activate the link between the dspuNode and the remote PU.
- dspuPuAdminLinkRetryTimeout
- Value (in seconds) for the delay between link activation attempts between the dspuNode and the remote PU.
- dspuPuAdminStartPu
- Attempt link activation with the remote PU. TRUE -> Attempt link activation with remote PU. FALSE -> Do not attempt link activation with remote PU.
- dspuPuAdminDlcType
- DLC type used by the dspuNode for link activation with the remote PU.
- dspuPuAdminDlcUnit
- DLC unit used by the dspuNode for link activation with the remote PU.
- dspuPuAdminDlcPort
- DLC port used by the dspuNode for link activation with the remote PU.
- dspuPuAdminFocalPoint
- PU serves as a focal point for alert forwarding. TRUE -> PU serves as focal point FALSE -> PU does not serve as focal point Only an upstream PU may be defined as a focal point. Downstream PUs can never be defined as a focal point; FocalPoint is always FA ...
- dspuPuAdminRowStatus
- Used by a Management Station to create or delete the row entry in the dspuPuAdminTable following the RowStatus textual convention. Upon successful creation of the row, an Agent automatically creates a corresponding entry in the dspuPuOperTable. The Manage ...
- dspuPuAdminRemoteAddress
- Poll address, DLCI, or subscriber address associated with the remote PU.
- dspuPuOperTable
- Table listing all active upstream/downstream PUs that are owned by the DSPU node (including default PUs). NOTE: In addition to the explicitly defined PUs from the dspuPuAdminTable, the dspuPuOperTable also includes default downstream PUs that may be dynam ...
- dspuPuOperEntry
- Each entry represents an active upstream/downstream PU.
- dspuPuOperIndex
- Index of the PU entry in dspuPuOperTable.
- dspuPuOperName
- Name of the PU.
- dspuPuOperType
- PU type is either upstream or downstream.
- dspuPuOperRemoteMacAddress
- MAC address of the remote PU.
- dspuPuOperRemoteSapAddress
- SAP address of the remote PU.
- dspuPuOperLocalSapAddress
- SAP address of the local PU.
- dspuPuOperXid
- Upstream PU : XID that was sent to the remote PU. Dnstream PU : XID that was received from the remote PU.
- dspuPuOperXidFmt
- Type of XID format used during activation of the link between this dspuNode and the remote PU.
- dspuPuOperWindowSize
- Send/Receive window size to be used across the link between this dspuNode and the remote PU.
- dspuPuOperMaxIframe
- Maximum size of an I-frame that can be transmitted/received across the link between this dspuNode and the remote PU.
- dspuPuOperLinkRetryCount
- Number of times that the DSPU node will attempt to activate the link between the dspuNode and the remote PU.
- dspuPuOperLinkRetryTimeout
- Value (in seconds) for the delay between link activation attempts between the dspuNode and the remote PU.
- dspuPuOperStartPu
- Attempt link activation with the remote PU. TRUE -> Attempt link activation with remote PU. FALSE -> Do not attempt link activation with remote PU.
- dspuPuOperDlcType
- DLC type used by the dspuNode for link activation with the remote PU.
- dspuPuOperDlcUnit
- DLC unit used by the dspuNode for link activation with the remote PU.
- dspuPuOperDlcPort
- DLC port used by the dspuNode for link activation with the remote PU.
- dspuPuOperFocalPoint
- PU serves as a focal point for alert forwarding. TRUE -> PU serves as focal point FALSE -> PU does not serve as focal point Only an upstream PU may be defined as a focal point. Downstream PUs can never be defined as a focal point; FocalPoint is always FA ...
- dspuPuOperState
- Operational state of PU is either active or inactive.
- dspuPuOperFsmState
- Current FSM state of the PU as follows: linkReset - Link is in reset state - not connected linkPendConnOut - Pending ConnectOut to establish link linkPendConnIn - Pending ConnectIn to establish link linkPendXid - Pending XID negotiation on the link linkXi ...
- dspuPuOperStartTime
- Timestamp of PU activation (when ACTPU +rsp received).
- dspuPuOperLastStateChgTime
- TimeStamp of last PU state change between active<->inactive.
- dspuPuOperRemoteAddress
- Poll address, DLCI, or subscriber address associated with the remote PU.
- dspuPuStatsTable
- Table listing the statistics recorded for each PU.
- dspuPuStatsEntry
- Each entry represents an active upstream/downstream PU and has a corresponding entry in the dspuPuOperTable.
- dspuPuStatsSentBytes
- Number of bytes sent by this PU.
- dspuPuStatsRcvdBytes
- Number of bytes received by this PU.
- dspuPuStatsSentFrames
- Number of frames sent by this PU.
- dspuPuStatsRcvdFrames
- Number of frames received by this PU.
- dspuPuStatsSentNegativeRsps
- Number of negative responses sent by this PU.
- dspuPuStatsRcvdNegativeRsps
- Number of negative responses received by this PU.
- dspuPuStatsActiveLus
- Number of active LUs on this PU (LU becomes active when ACTLU +rsp received).
- dspuPuStatsInactiveLus
- Number of inactive LUs on this PU (LU is inactive until ACTLU rq or ACTLU +rsp received).
- dspuPuStatsBindLus
- Number of LUs on this PU which are active-in-session. (LU is active-in-session when BIND rq received)
- dspuPuStatsActivationFailures
- Number of activation failures for this PU.
- dspuPuStatsLastActivationFailureReason
- Reason for last activation failure of this PU as follows: noError - No PU activation failure has been detected otherError - Undefined error detected during PU activation internalError - Internal resources error detected during PU activation configurationE ...
- dspuLuAdminTable
- Table listing all LUs owned by the PU. NOTE: The dspuLuAdminTable does not include LUs owned by default downstream PUs that may be dynamically created.
- dspuLuAdminEntry
- Each entry represents a defined LU owned by the PU.
- dspuLuAdminLuLocalAddress
- NAU address of the local LU.
- dspuLuAdminType
- LU type is either pooled or dedicated.
- dspuLuAdminPoolClassName
- Pool class to which the LU is defined as a member. The dspuLuAdminPoolClassName is valid for pooled LUs only.
- dspuLuAdminPeerPuIndex
- For downstream LUs, the PeerPuIndex identifies the upstream PU that owns the upstream LU to which this downstream LU is assigned. For upstream LUs, the PeerPuIndex identifies the downstream PU that owns the downstream LU to which this upstream LU is assig ...
- dspuLuAdminPeerLuLocalAddress
- For downstream LUs, the PeerLuLocalAddress identifies the NAU address of the upstream LU to which this downstream LU is assigned. For upstream LUs, the PeerLuLocalAddress identifies the NAU address of the downstream LU to which this upstream LU is assigne ...
- dspuLuAdminRowStatus
- Used by a Management Station to create or delete the row entry in the dspuLuAdminTable following the RowStatus textual convention. Upon successful creation of the row, an Agent automatically creates a corresponding entry in the dspuLuOperTable. The Manage ...
- dspuLuOperTable
- Table listing all LUs owned by the PU. NOTE: In addition to the LUs owned by explicitly defined PUs from the dspuLuAdminTable, the dspuLuOperTable also includes the LUs owned by default downstream PUs that may be dynamically created.
- dspuLuOperEntry
- Each entry represents a defined LU owned by the PU.
- dspuLuOperLuLocalAddress
- NAU address of the local LU.
- dspuLuOperType
- LU type is either pooled or dedicated.
- dspuLuOperPoolClassName
- Pool class to which the LU is defined as a member. The dspuLuOperPoolClassName is valid for pooled LUs only.
- dspuLuOperPeerPuIndex
- For downstream LUs, the PeerPuIndex identifies the upstream PU that owns the upstream LU to which this downstream LU is assigned. For upstream LUs, the PeerPuIndex identifies the downstream PU that owns the downstream LU to which this upstream LU is assig ...
- dspuLuOperPeerLuLocalAddress
- For downstream LUs, the PeerLuLocalAddress identifies the NAU address of the upstream LU to which this downstream LU is assigned. For upstream LUs, the PeerLuLocalAddress identifies the NAU address of the downstream LU to which this upstream LU is assigne ...
- dspuLuOperState
- Operational state of LU is either active or inactive.
- dspuLuOperFsmState
- Current FSM state of the LU as follows: reset - neither dnLu or upLu active dnLuStarted - dnLu active, upLu inactive upLuActive - upLu active, dnLu inactive dnLuPendAct - dnLu pending activation, upLu active-unavailable dnLuActUnav - dnLu active-unavailab ...
- dspuLuOperSessionState
- Operational state of LU session is either bound or unbound.
- dspuLuOperLastActivationFailureReason
- Reason for last activation failure of this PU as follows: noError - No LU activation failure has been detected otherError - Undefined error detected during LU activation luNegativeResponse - Negative ACTLU response received from remote LU
- dspuSapTable
- Table listing the SAPs that are enabled for the DSPU node.
- dspuSapEntry
- Each entry represents an enabled SAP for the DSPU node.
- dspuSapAddress
- SAP address of the local SAP.
- dspuSapType
- Local SAP type is either upstreamSap or downstreamSap.
- dspuSapDlcType
- DLC type of the adapter that owns the local SAP.
- dspuSapDlcUnit
- DLC unit of the adapter that owns the local SAP.
- dspuSapDlcPort
- DLC port of the adapter that owns the local SAP.
- dspuSapOperState
- Operational state of the local SAP as follows: - sapClosed - sapOpening - sapOpened - sapClosing
- dspuSapRowStatus
- This object is used by a Management Station to create or delete the row entry in the dspuSapTable following the RowStatus textual convention. The Management Station can set the value to 'destroy (6)' and the Agent will then delete the rows corresponding t ...
- dspuNodeGroup
- Global DSPU node information
- dspuPoolClassGroup
- LU pool class information
- dspuPooledLuGroup
- Pooled LU information
- dspuPuGroup
- Upstream/Downstream PU node information
- dspuLuGroup
- Upstream/Downstream LU information
- dspuSapGroup
- Local SAP information
- dspuPuGroupV11R01
- Upstream/Downstream PU node information
- dspuLuGroupV11R01
- Upstream/Downstream LU information
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
